4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
961d813953
Merge pull request #455 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 23:52:27 +07:00
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
383f8047a5
Merge pull request #453 from hathach/add-da14695-usb
...
Add da14695 usb
2020-07-01 13:02:16 +07:00
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
e4391c32a6
Merge pull request #451 from duempel/fix_synopsys_short_packet
...
Fix receiving of short packet data (Synopsys)
2020-07-01 00:11:21 +07:00
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
0477446224
more clean up
2020-06-30 16:31:59 +07:00
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
62239bb576
cdc-acm: Use 512 bytes when in HS mode.
...
Removes error:
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
while enumerationg.
2020-06-30 11:02:41 +02:00
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
2b9466dbc0
Merge pull request #445 from hathach/add-kaluga-bsp
...
added esp32s2 kaluga bsp
2020-06-29 19:16:09 +07:00
2dff40236c
add kaluga files
2020-06-29 18:40:23 +07:00
00104894dc
update ci
2020-06-29 18:07:34 +07:00
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
8e143fc962
Add board support for Dialog DA1469x-dk-pro
...
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
530bc2c39c
Add name to contributor list
2020-06-29 09:57:17 +02:00
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
562c079cf4
Merge pull request #444 from jepler/same5x_bugfix
...
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-26 14:40:57 +07:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d489581deb
Merge pull request #441 from hathach/add-same5x
...
added OPT_MCU_SAME5X option
2020-06-26 01:31:39 +07:00
504b152f88
update readme
2020-06-26 01:30:33 +07:00
d5bfb70b72
Merge pull request #442 from czeslawmakarski/pr/update-nrfx-to-nrfx-2.2.0
...
Update NRFX to v2.2.0
2020-06-25 13:45:27 +07:00
7c94176b4b
Update NRFX to v2.2.0
2020-06-24 15:07:28 +02:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
1cb53dd23e
Merge pull request #438 from UweBonnes/debug
...
examples/readme.md: Add hint to build for debug
2020-06-22 11:11:00 +07:00
d96fa8d407
examples/readme.md: Add hint to build for debug.
2020-06-21 14:33:47 +02:00
bd41504f65
Merge pull request #433 from HiFiPhile/sof
...
Disable SOF in dcd_stm32_fsdev
2020-06-20 17:33:58 +07:00
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
2b27eed01a
Merge pull request #431 from HiFiPhile/unaligned
...
Fix IAR compiler warnings.
2020-06-17 17:24:40 +07:00
hathach