hathach
85e18b9172
house keeping
2021-10-25 15:58:12 +07:00
hathach
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
hathach
61c80840c3
update dwc int enable/disable
2021-10-25 00:40:21 +07:00
hathach
4ab931a361
more clean up
2021-10-25 00:23:18 +07:00
hathach
0e7c103e98
minor rename
2021-10-25 00:11:17 +07:00
hathach
32742571da
switch gd32 and stm32f4 to use new dwc2 driver
2021-10-25 00:06:57 +07:00
hathach
06de6b725c
adding generalized dwc2 driver
2021-10-24 23:24:46 +07:00
Ha Thach
55e0b5882a
Merge pull request #1160 from cr1901/msp-fix
...
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incre…
2021-10-24 17:28:11 +07:00
hathach
109b7a6661
more wMaxPacketSize
2021-10-24 14:39:02 +07:00
hathach
5af989384b
remove ep descriptor wMaxPacketSize bitfield due to endian issue
2021-10-24 13:11:21 +07:00
William D. Jones
07c74c76d0
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incrementing past unsent data.
2021-10-23 14:04:44 -04:00
Ha Thach
311c05b401
Merge branch 'master' into fix-warnings
2021-10-23 21:23:56 +07:00
Scott Shawcroft
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
Scott Shawcroft
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
hathach
5e437ee186
pi cm4 enumerated as full speed device
2021-10-22 21:55:15 +07:00
Ha Thach
4bfab30c02
Merge pull request #1139 from hathach/release-0.12.0
...
update changelog and increase version for 0.12.0
2021-10-19 13:27:53 +07:00
hathach
826b34a8ac
enable -Wnull-dereference
2021-10-18 00:13:40 +07:00
hathach
099d3b377f
add volatile to EPx_REGS for -Wcast-qual
...
since gcc does difference between volatile struct and member when
casting pointer
2021-10-17 17:33:14 +07:00
hathach
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
hathach
a5f516893b
more with -Wcast-qual
2021-10-17 16:36:53 +07:00
hathach
0b249618b0
fix -Wcast-qual
2021-10-15 23:54:31 +07:00
Jerzy Kasenberg
bf4b133084
dcd_da146xx: Drop unexpected data
...
USB3CV tool verifies MSC device by sending too short or
too long packets.
In case of too long packets (msc_device requested 31 bytes
but incoming data had 32 bytes) extra byte(s) were left in
FIFO resulting in some data mismatch later on.
Now if more data is received in packet that expected extra
bytes are just dropped.
2021-10-15 12:02:15 +02:00
Jerzy Kasenberg
49aa0b72a8
dcd_da146xx: Fix EPIN stall notification handling
...
Normal TX handler for IN non-0 endpoints is called during
outgoing transfer or just after it was finished.
It may need to fill TX fifo with same data if TX_DONE is present
but ACK_STAT is not.
It may need to fill more data when called during transfer.
But it may also be called when STALL was sent.
In this case TX_DONE is set ACK_STAT is not, just like for packets
that were sent but no ACK was received.
Code was trying to send something again. There was nothing to send
so empty ZLP was scheduled for stalled endpoint.
This ZLP was later send to host where valid response was required.
This change checks if notification was for STALL endpoint and
does not try to fill TX FIFO in that case.
2021-10-15 12:02:15 +02:00
graham sanderson
06d9555389
More warning cleanup
...
- physically suppress warnings in TinyUSB headers using pragmas so they don't break -Werror compilation of external files that include them
- fix compiler warnings in rp2040 port
- add cmake method to rp2040 port to allow an external project to suppress warnings in TinyUSB itself
2021-10-14 15:23:26 -05:00
graham sanderson
7667299b48
Remove compiler warning
2021-10-14 12:13:39 -05:00
Ha Thach
9da234cd7c
Merge pull request #1101 from kasjer/kasjer/da146xx-bus-reset-sleep
...
da146xx bus reset and sleep reworked
2021-10-13 16:33:54 +07:00
Scott Shawcroft
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
Gordon McNab
5e6edecaa3
Streamline settings for board.
2021-10-07 17:00:28 +01:00
Gordon McNab
8c40a74f29
Sort out board settings.
2021-10-06 17:13:44 +01:00
Gordon McNab
9966b8a5d6
Change author in header to Bridgetek Pte Ltd.
2021-10-06 16:54:52 +01:00
Gordon McNab
37c5eeb51d
Rename directories to indicate that FT930 and FT900 devices are both covered by the same SDK and src/portable code. Board makefile includes __FT900__ macro for FT90x and __FT930__ macro for boards with FT93x.
2021-10-06 16:50:55 +01:00
Gordon McNab
62c613f6d2
Add initial port for FT9xx series from Bridgetek.
...
Add FT90X and FT93X to the list of devices in tusb_option.h. 1700 for FT90x and 1701 for FT93x.
Set endpoint attributes for FT90x and FT93x in dcd_attr.h.
Add FT90x routines for USB device in src/portable/bridgetek/ft90x/dcd_ft90x.c
The location for hardware header files and libraries is hw/mcu/bridgetek/ft90x/hardware. There are no files in the repository, but files will be linked as a submodule in the future. The required files can be copied from or linked to the location "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware" once the toolchain is installed.
Makefile for the MM900EV1B board for developing with an FT900 device is present. Use "BOARD=mm900ev1b".
2021-10-05 13:54:47 +01:00
hathach
103309b88b
Merge branch 'master' of github.com:hathach/tinyusb into zhangslice-master
...
examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
2021-09-29 15:27:41 +07:00
Scott Shawcroft
0a6ca65e3f
MMU works
2021-09-24 16:14:01 -07:00
Ha Thach
1c17cb1c45
Merge pull request #1103 from kasjer/kasjer/da146xx-close-cleanup
...
dcd_da146xx: Remove registers pointer from xfer_ctl_t
2021-09-24 20:55:16 +07:00
Jerzy Kasenberg
fbac58e3e4
dcd_da146xx: Implement dcd_edpt_close_all()
...
Unconditionally disables all endpoints except EP0.
2021-09-24 10:46:16 +02:00
Jerzy Kasenberg
1503955860
dcd_da146xx: Clear transfer data on dcd_edpt_close
...
Closing endpoint clears data in affected xfer_ctl_t
2021-09-24 09:28:51 +02:00
Jerzy Kasenberg
f172c5ee13
dcd_da146xx: Remove registers pointer from xfer_ctl_t
...
Note: this commit does not change any logic.
xfer_ctl_t structure keeps all dynamic data connected with transfer.
It used to have pointer to register set that was constant and was there
for convenience only.
Removing register pointer from structure makes cleanup easier as whole
structure can be erased with memset like function.
In many cases functions were using local variable regs and xfer->regs which
were same, that could be confusing so this part is unified.
Few macros were added for easy conversion between epnum, xfer, and regs.
2021-09-24 09:28:51 +02:00
Jerzy Kasenberg
428eedcd04
dcd_da146xx: Update bus handling
...
So far bus reset was handled (with some holes in it).
Sleep and remote wakeup were not really tested and did not work.
With this change:
- bus reset is reworked
- remote wakeup works
- bus signal sleep is handled
2021-09-23 14:12:50 +02:00
Jerzy Kasenberg
c427712449
dcd_da146xx: Handle only enabled interrupts
...
Not much of an improvement but handle only interrupts
that were enabled and are expected.
2021-09-23 14:12:50 +02:00
Ha Thach
3e569f8e79
Merge pull request #1094 from kasjer/kasjer/da146xx-vbus-handling
...
dcd_da146xx: Add VBUS handling
2021-09-18 23:12:40 +07:00
hathach
3333703d25
Merge branch 'master' into zhangslice-master
2021-09-18 13:35:26 +07:00
Scott Shawcroft
2499c9382d
rpi start. doesn't work
2021-09-17 16:51:34 -07:00
Jerzy Kasenberg
6d8677a78a
dcd_da146xx: Add VBUS handling
...
DA146xx are Bluetooth devices that may be battery
powered and when not connected to USB host there
is no need for USB peripheral to be running.
This change allows to enable USB peripheral when
VBUS is present otherwise USB is down reducing
power consumption.
tud_vsub_changed() function must be called
whenever VBUS change was detected.
For bus-powered devices this function should be called
at startup since VBUS must be present while device
is working.
2021-09-17 12:10:17 +02:00
hathach
b363afc091
minor clean up
2021-09-17 00:46:29 +07:00
hathach
c65cc75c6b
use correct resume detection for kl25z
2021-09-17 00:44:39 +07:00
hathach
8dfe0898e7
minor update to dcd khci
2021-09-17 00:43:10 +07:00
kkitayam
fbe1bf375c
Fix stall interrupt handling
2021-09-15 21:39:02 +09:00
hathach
93ed3034c0
merge master and minor clean up
2021-09-15 18:35:52 +07:00
hathach
f39656b6d7
Merge branch 'master' of github.com:hathach/tinyusb into kkitayam-impl_close_all_for_khci
2021-09-15 18:29:28 +07:00
Ha Thach
03866ddf9b
Merge pull request #1062 from HiFiPhile/fifo_dcd_transdimension
...
Improvements for dcd_transdimension
2021-09-15 16:07:06 +07:00
Ha Thach
6d3fb7eb98
Merge pull request #1087 from HiFiPhile/nuc_wkp
...
NUC126: fix remote_wakeup
2021-09-14 11:40:55 +07:00
hathach
cdc63459eb
esp32sx implement dcd_remote_wakeup(), fully compliance to chapter9 test suite
2021-09-13 16:49:38 +07:00
hathach
e64bfb9ff5
implement dcd_edpt_close_all(), pass chapter9 test suite (without remote wakeup)
2021-09-13 16:16:37 +07:00
hathach
43e6555fd0
clean up
2021-09-13 13:09:38 +07:00
hathach
ce5db06ba0
clear PID along with clear stall
2021-09-13 12:05:49 +07:00
hathach
6feda5ae8f
Merge branch 'nuc_wkp' of https://github.com/HiFiPhile/tinyusb into HiFiPhile-nuc_wkp
2021-09-13 11:52:16 +07:00
hathach
9bed4e2e21
refactor nxp TDI dcd_edpt_xfer_fifo
2021-09-13 00:45:15 +07:00
hathach
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
hathach
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
hathach
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
MasterPhi
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
MasterPhi
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
MasterPhi
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
kkitayam
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
Mengsk
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
hathach
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
hathach
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
hathach
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
kkitayam
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
kkitayam
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
Ha Thach
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
Ha Thach
5f141a4c13
Merge pull request #1077 from hathach/st-synopsy-compliance
...
St synopsy compliance
2021-09-08 18:00:44 +07:00
hathach
d077574097
reset PID to DATA0 when open endpoint
2021-09-08 17:56:22 +07:00
hathach
67e80f60e3
fix build with gd32vf103
2021-09-08 13:35:11 +07:00
hathach
4ac136d81d
implement remote wakeup for stm synopsys
2021-09-08 00:57:07 +07:00
hathach
a54a974fa5
make synopsys usbcv compliance
...
- implement dcd_edpt_close_all()
- reset dtoggle when open endpoint
- correct dev interrupt mask on bus reset
2021-09-07 23:02:57 +07:00
kkitayam
f3da48d46a
Implement dcd_edpt_close_all() for Renesas RX family
2021-09-07 23:28:54 +09:00
hathach
d6e9fe38be
rp2040 implement dcd_edpt_close_all()
...
aslo rename reset_ep0_pid() and clean up. We only need to reset pid when
setup packet received
2021-09-01 19:44:12 +07:00
hathach
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
hathach
ab0c3e8dd0
fix rp2040 chapter 9 TD 9.6 test
2021-08-31 17:41:08 +07:00
MasterPhi
16b802d50c
add dcd_edpt_close and iso xfer.
2021-08-31 12:02:19 +02:00
MasterPhi
864d8381a7
dcd_transmission xfer_fifo support.
2021-08-31 11:59:51 +02:00
hathach
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
hathach
ad21b69277
fix nrf clear data toggle sequence when clearing stall
2021-08-29 12:05:34 +07:00
hathach
66c292e2ec
fix a couple of nrf dcd issue
...
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
2021-08-29 00:34:21 +07:00
hathach
8bad0af849
explicitly clear stall and data toggle for edpoint upon open()
2021-08-27 22:31:08 +07:00
hathach
81c73c235f
implement dcd_edpt_close_all() for nrf52840
2021-08-27 22:30:30 +07:00
hathach
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
hathach
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
Ha Thach
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
Greg Steiert
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
hathach
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
hathach
3309425211
sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB
...
separate dev0 from _usbh_devices pool to save sram
2021-08-23 19:56:53 +07:00
hathach
75cd593b60
add hcd_devtree_get_info()
...
remove usbh_hcd.h
2021-08-23 17:00:41 +07:00
hathach
a490a3fe61
add hcd attr, add note for ehci framelist on NXP derivative
2021-08-23 15:40:57 +07:00
hathach
4ca176c291
refactor ehci init api
2021-08-23 12:37:54 +07:00
hathach
6a16f6ccdd
rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
2021-08-23 11:01:40 +07:00
MasterPhi
69e539fda4
Fix CI.
2021-08-21 12:11:35 +02:00
MasterPhi
e20755442a
nuc126: fix set_address & disable sof
2021-08-21 12:04:02 +02:00
kkitayam
ff59e98a6a
Add compile switch to enable SOF during suspend only
2021-08-19 23:57:34 +09:00
kkitayam
351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
Ha Thach
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
Ha Thach
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
hathach
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
Mengsk
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
hathach
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
hathach
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
Ha Thach
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
hathach
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
hathach
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
Tobias Ringström
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
hathach
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
hathach
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
Jerzy Kasenberg
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
hathach
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
hathach
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
hathach
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
hathach
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
hathach
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
Jerzy Kasenberg
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
Robert Manzke
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
Stefan Kerkmann
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
Stefan Kerkmann
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
Ha Thach
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
MasterPhi
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
Stefan Kerkmann
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
Stefan Kerkmann
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
kkitayam
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
MasterPhi
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
MasterPhi
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
kkitayam
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
kkitayam
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
kkitayam
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
hathach
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
hathach
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
hathach
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
hathach
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
hathach
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
Ha Thach
c737aa6fbb
Merge pull request #693 from HiFiPhile/dcd_same70
...
SAMx7x (E70, S70, V70, V71) DCD Support
2021-07-22 00:07:33 +07:00
MasterPhi
8c6cd5396c
Fix non-DMA IN irq.
2021-07-21 10:50:07 +02:00
MasterPhi
5492d9148c
Re-enable SETUP irq on EP0 stall.
2021-07-21 10:29:47 +02:00
MasterPhi
9c26c0c01e
Remove redundant TX irq.
2021-07-21 09:42:26 +02:00
MasterPhi
eec927ea95
Fix EP0 issue (again)
2021-07-21 00:28:51 +02:00
MasterPhi
fa9a327a71
Workaround of EP0 issue, clean up.
2021-07-20 13:24:39 +02:00
MasterPhi
895c913aa9
Merge branch 'dcd_same70' of https://github.com/HiFiPhile/tinyusb into dcd_same70
2021-07-19 22:04:34 +02:00
MasterPhi
75f61328ea
Remove clock init.
2021-07-19 22:03:47 +02:00
Ben Evans
cee980c598
Fix for dcd_synopsys driver integer overflow in HS mode (issue #968 ).
2021-07-19 17:45:12 +10:00
hathach
05f59fb8ed
clean up warning
2021-07-19 12:08:01 +07:00
MasterPhi
8cae17bfc8
Fixing NAKed OUT xfer
2021-07-19 01:07:33 +02:00
MasterPhi
bae0d3b7bb
Fix build error.
2021-07-17 14:42:23 +02:00
MasterPhi
7e3e41952f
Fix ISO support.
2021-07-17 13:48:21 +02:00
HiFiPhile
b194aa240b
Merge branch 'master' into dcd_same70
2021-07-17 12:10:35 +02:00
kkitayam
1ff3b76451
remove unnecessary blocking operation.
...
add comments why resume event is sent manually.
2021-07-05 21:27:08 +09:00
kkitayam
3019c6eb40
Add SUSPEND/RESUME handling for Renesas RX family.
2021-07-03 23:35:58 +09:00
Wini-Buh
4c0cce4b1d
Make toolchain dependency more consistent
2021-06-29 21:45:18 +02:00
Wini-Buh
36ba9608bd
Merge from current master. Fixed a compilation error with the GNUC toolchain
2021-06-29 00:43:41 +02:00
Wini-Buh
cb0f1d98db
Merge remote-tracking branch 'origin/master' into CCRX_Port
...
# Conflicts:
# src/portable/renesas/usba/dcd_usba.c
# src/tusb_option.h
2021-06-29 00:19:30 +02:00
Ha Thach
6e939de9d6
Merge pull request #891 from hathach/host-rp2040-double-buffer
...
RP2040 double buffer
2021-06-28 17:39:09 +07:00
Ha Thach
b2feae15e4
Merge pull request #927 from hathach/add-rx65n-board
...
Add rx65n board
2021-06-28 13:53:42 +07:00
DuMaM
b5ce269675
GCC 11 build fix
...
During Adafruit Bootloader compilation, I spotted bellow error which do not allow me build project.
``` c
inlined from 'hfclk_running' at lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:785:13:
lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:792:31: error: 'is_running' may be used uninitialized [-Werror=maybe-uninitialized]
792 | return (is_running ? true : false);
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~
```
2021-06-26 17:03:46 +02:00
kkitayam
393a9120ac
add the entry for RX65N
2021-06-26 23:09:18 +09:00
Wini-Buh
51c6444e1d
final clean up
2021-06-22 23:49:24 +02:00
Wini-Buh
c5f6b57755
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-22 23:21:01 +02:00
Ha Thach
81fa9966de
Merge pull request #895 from ElectronicCats/master
...
add support SAML21
2021-06-20 01:01:00 +07:00
hathach
6b621baeb3
fix race condition with control since TASKS_EP0RCVOUT also require EasyDMA
2021-06-19 01:58:27 +07:00
hathach
82618d2d5f
fix build with mm32 board
2021-06-18 17:18:11 +07:00
hathach
5006b1065a
remove duplicate mm32 dcd
2021-06-18 12:49:41 +07:00
zhangslice
7b27607f1a
mit license
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
zhangslice
3ba72b53d8
Add MM32 SDK and USB driver
...
Signed-off-by: zhangslice <1304224508@qq.com>
2021-06-18 12:46:27 +07:00
hathach
832d22d7ad
force single buffered for device mode, out endpoint
2021-06-17 01:55:35 +07:00
MasterPhi
30fff56aa4
Revert "Use byte copy.", add barrier after buffer write.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-16 00:18:38 +02:00
MasterPhi
67a6560ec9
Default use dual bank for FS, use dcd irq switch.
2021-06-15 21:52:14 +02:00
MasterPhi
6cc702e9ec
Prevent buffer overflow.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-15 21:16:51 +02:00
MasterPhi
54dc694be4
Use byte copy.
2021-06-15 19:11:53 +02:00
MasterPhi
ca8e8041ef
Fix resume, always init FS clock.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-15 17:53:09 +02:00
sabas1080
7bed7d70f0
add support SAML21
2021-06-15 00:01:28 -05:00
hathach
5c567129ea
fix calculating xferred bytes with double buffer with short packet on buffer0
2021-06-13 18:30:26 +07:00
hathach
f38c460433
fix ep tx with double buffered
2021-06-13 17:19:14 +07:00
hathach
bd039c8d37
fix build with log for device
2021-06-13 16:16:25 +07:00
hathach
1af64f9729
remove sent_setup from hw endpoint
2021-06-13 15:31:00 +07:00
hathach
289ccf3c93
remove dev_ep_map
2021-06-13 13:19:20 +07:00
MasterPhi
85fc423569
Rename SAM7X to SAMX7X
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 12:36:59 +02:00
MasterPhi
f039607afc
Fix indent.
...
Signed-off-by: MasterPhi <admin@hifiphile.com>
2021-06-12 11:19:08 +02:00
Rafael Silva
776a770947
dcd: sam7x: rename family dcd to include the whole family
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-12 00:09:24 +01:00
Wini-Buh
60d8ecbfe6
clean up
2021-06-11 22:36:17 +02:00
Wini-Buh
1c23462b43
weak atrribute work around removed from CCRX_Port
2021-06-11 22:25:36 +02:00
Rafael Silva
2196991df3
dcd: same70: trim trailling spaces
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 21:03:36 +01:00
Rafael Silva
bcd3e31bd6
dcd: same70: fix unused variable warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 20:59:48 +01:00
Rafael Silva
9a03ab9dfa
dcd: same70: change cmsis deprecated macros
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2021-06-11 20:52:22 +01:00
hathach
910e11a8ab
fix ci build
2021-06-11 19:04:16 +07:00
hathach
dfe5a727c6
log clean up
2021-06-11 18:54:09 +07:00
hathach
b39faa15ef
map pico_info to log2, pico_trace to log3
2021-06-11 18:44:08 +07:00
hathach
a6d22f5a68
replace pico_warn by log level 1
2021-06-11 18:40:01 +07:00
hathach
66c8a13f13
remove unused variable in hw endpoint
...
last_buf, buf_sel, transfer_size
2021-06-11 18:26:41 +07:00
hathach
93cb2ff4cf
more refactor double buffered rp2040
2021-06-11 18:16:13 +07:00
hathach
1d48320d8a
rename hw endpoint
...
- total_len to remaining_len
- len to xferred_len
2021-06-11 17:58:29 +07:00
hathach
5d6e381ef6
refactor rp2040 usb
...
- make _hw_endpoint_xfer_sync and _hw_endpoint_start_next_buffer private
- drop prefix _ from _hw_endpoint_xfer_continue and
_hw_endpoint_reset_transfer
2021-06-11 17:34:51 +07:00
MasterPhi
c291deccfa
Add fifo & DMA linked list mode support.
2021-06-11 12:17:11 +02:00
HiFiPhile
24de9d39af
Format.
2021-06-11 12:17:11 +02:00
HiFiPhile
1dafcd1132
- Add Full Speed switch
...
- Add DMA support
- Add Dual bank support
Signed-off-by: HiFiPhile <admin@hifiphile.com>
2021-06-11 12:17:11 +02:00
HiFiPhile
4f4a33b378
Seems like fixed ep0 issues, code format.
...
Signed-off-by: HiFiPhile <admin@hifiphile.com>
2021-06-11 12:17:11 +02:00
HiFiPhile
f8aa4b3ff3
Add sketchy SAME70 DCD driver.
2021-06-11 12:17:10 +02:00
hathach
a1a03c92f6
double buffered work with host
2021-06-11 17:05:49 +07:00
hathach
43656dc0a7
more clean up
2021-06-10 23:29:02 +07:00
hathach
cf0a475a2e
clean up
2021-06-10 22:00:59 +07:00
hathach
c7f51cde40
implement usbh_edpt_busy (WIP), remove hcd_edpt_busy
2021-06-10 17:19:21 +07:00
hathach
7e6cba7359
remove hcd_edpt_stalled()
2021-06-10 16:55:12 +07:00
Ha Thach
3c4ab6bd8a
Merge pull request #883 from hathach/fix-rp2040-host-transferred-bytes
...
fix computing transferred bytes with E4
2021-06-10 11:35:51 +07:00
hathach
501de2a5e8
fix computing transferred bytes with E4
2021-06-08 10:29:22 +07:00
hathach
c2b85c8d6d
add OPT_MCU_MM32F327X
...
move dcd_mm32f into mindmotion folder
2021-06-07 18:51:44 +07:00
zhangslice
26b9fc38ed
Add MM32 SDK and USB driver ( #869 )
...
* Add MM32 SDK and USB driver
* add mindmotion mm32sdk as submodule
remove the local copy of mm32
* mit license
Signed-off-by: zhangslice <1304224508@qq.com>
Co-authored-by: hathach <thach@tinyusb.org>
2021-06-07 17:32:46 +07:00
Wini-Buh
5a554508ca
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-03 22:17:30 +02:00
graham sanderson
c81bc38d42
Add __unused to variables that are only used if TU_LOG does something
2021-06-03 10:10:44 -05:00
Wini-Buh
e26cf6b26c
Missing RX device dependency corrected
2021-06-02 21:33:32 +02:00
Ha Thach
8ea0dfba68
Merge pull request #865 from kilograham/pico-0.10.0
...
Pico 0.10.0
2021-06-03 01:02:54 +07:00
hathach
bc0a0386e9
clean up
2021-05-31 18:41:08 +07:00
hathach
31077f48d2
correct ohci endpoint address in xfer complete
2021-05-31 18:16:07 +07:00
hathach
4e98ce9147
use hcd_frame_number() instead of uframe
2021-05-31 18:15:47 +07:00
hathach
da8000d42d
clean up ohci, remove obsolete api
2021-05-31 16:34:16 +07:00
hathach
04797bc5a5
clean up
2021-05-31 16:05:55 +07:00
hathach
3fb80e76ce
remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
2021-05-31 12:08:37 +07:00
hathach
5cf930d78a
fix cast-align warning in msc host
2021-05-31 11:11:00 +07:00
hathach
c2a0c1507b
add more comment
2021-05-30 23:44:29 +07:00
hathach
54c9150574
add errata number
2021-05-30 23:41:59 +07:00
hathach
6498ee1996
fix incorrect data toggle when max packet size < 64
...
fix host buf_sel panic with "already available"
2021-05-30 23:35:54 +07:00
graham sanderson
3973ec4b5e
rp2040: fix debug compilation error
2021-05-30 08:16:15 -05:00
Wini-Buh
b4f092ec74
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-05-29 21:23:39 +02:00
hathach
164778a716
update limit each transfer not less than 64
2021-05-28 17:42:13 +07:00
hathach
9ad6fadf6a
more include clean up
2021-05-27 18:34:07 +07:00
hathach
b36b211c26
clean up tusb_fifo.h include
2021-05-27 17:58:42 +07:00
hathach
13613eafb7
correct ehci control endpoint address report on xfer complete
...
improve host log
2021-05-18 12:58:24 +07:00
hathach
1dd2cd43dd
add hcd_ehci.h as interface for ehci port
2021-05-18 12:58:24 +07:00
hathach
9233269a2c
only apply errata walkaround for nrf52
2021-05-11 18:38:23 +07:00
Jerzy Kasenberg
e2f795067a
Allow build for NRF5340 MCU
...
Errata code referred to NRF_USBD_BASE.
This definition is not present in NRF5340 but both NRF52 and NRF53
do have NRF_USBD which maps to NRF_USBD_BASE for NRF52 and
to NRF_USBD_S_BASE for NRF5340.
This just make build possible for NRF5340.
2021-05-11 12:37:08 +02:00
corvus-ossifragus
72f5202086
Update trace statements that referenced deprecated structure elements.
2021-05-10 10:09:09 -04:00
Ha Thach
2a343ba916
Merge pull request #826 from hathach/minor-cleanup
...
minor clean up
2021-05-10 19:29:45 +07:00
hathach
13de8f5d98
minor clean up
2021-05-10 19:15:46 +07:00
corvus-ossifragus
13b510ad8e
Update hcd_rp2040.c
...
Remove reference to the deprecated "num" and "in" members of struct hw_endpoint which still exist in an assert statement and break DEBUG builds.
2021-05-07 16:49:48 -04:00
Ha Thach
42a1d2f3b9
Merge pull request #804 from hathach/audio_make_dma_ready
...
Implement functions to allow for DMA usage in audio driver.
2021-05-02 15:29:38 +07:00
hathach
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
hathach
a8e109cb3d
clean up
2021-04-26 17:14:20 +07:00
hathach
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
hathach
f14daf2081
fix unaligned access with port1 hs
2021-04-24 15:04:58 +07:00
hathach
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
hathach
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
hathach
8bed369c7f
lpc55 better multiport support
2021-04-24 11:30:14 +07:00
hathach
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
Reinhard Panhuber
03f974c9b9
Implement functions to allow for DMA usage in audio driver.
...
- Add tud_audio_n_get_ep_out_ff(), tud_audio_n_get_ep_in_ff(),
tud_audio_n_get_rx_support_ff(), and tud_audio_n_get_tx_support_ff()
- Change get_linear_read/write_info() to return linear and wrapped part
at once
- Adjusted affected code in audio_device.c and tested with
audio_4_channel.
2021-04-23 10:27:48 +02:00
Alex Lisitsyn
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00