d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
fce6252456
hub works with ohci as well. There is some problem when plug & unplug device hmm
2013-12-19 12:21:40 +07:00
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
736cbdc276
using PINSEL_ConfigPin for setting pinsel
2013-12-13 12:41:29 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
51b6c6ff41
implement inline bit manipulation function
2013-12-12 12:21:38 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
b35d2c8f43
add lpc17xx build config for host demo
2013-12-11 12:13:22 +07:00
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
b35acbdcb2
add some doxygen
2013-12-10 10:57:59 +07:00
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
1ad78f104e
refractor hid device driver
2013-12-02 14:17:51 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
4b78578266
fix potential wrong endpoint handle for stalling unsupported scsi command
2013-12-01 22:34:59 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
d2f91af6b3
add some document for msc_device API
2013-12-01 12:18:26 +07:00
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
47d8af7111
complete msc demo with lpc13uxx with readonly flash
2013-11-26 13:58:13 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
c461c72ac2
clean up
2013-11-21 13:20:46 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
dbfad50d43
house keeping
2013-11-20 12:21:29 +07:00
d284ecaccb
add sw int_on_complete support for dcd lpc17xx
2013-11-20 12:03:04 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
hathach