4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
df8d56f485
more document
2013-10-26 20:14:12 +07:00
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
b1142ff065
document hub
2013-10-24 17:00:04 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
7f4a3fc829
ignore multiple level of hub
2013-10-01 13:23:31 +07:00
71b2859fe5
handle unplug the hub itself
2013-10-01 13:09:52 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5eebec61f1
refractor hub
2013-09-30 17:14:44 +07:00
0f05d27ac9
refractor hub
2013-09-30 16:59:41 +07:00
9ecaec67b3
refractor hub
2013-09-30 16:40:02 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
a522263a9d
add implementation for
...
- tusbh_cdc_rndis_is_mounted
- tusbh_cdc_rndis_get_mac_addr
2013-07-19 02:30:22 +07:00
ce865721a5
add test & code to send rndis msg query for permanent address (MAC address)
2013-07-19 01:52:56 +07:00
3b12917fb0
extract send message & wait & get complete message to send_message_get_response_subtask
2013-07-14 08:33:39 +07:00
25304d142f
refractor qhd_xfer_error_isr (omit xfer_type para)
...
add accumulated total xferred byte for an endpoint until transfer with IOC set
- control xfer will have length of data phase in usbh_xfer_isr callback
2013-07-06 14:52:02 +07:00
68da489c2e
refractor ehci.c adding qhd_get_xfer_type
2013-07-06 13:41:48 +07:00
374aea7a11
change usbh_control_xfer_subtask to use flat API instead of passing tusb_control_request_t struct
2013-07-05 13:23:42 +07:00
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
aed07d83db
host enum task use static control_request variable instead of literal of requests
...
increase enum task stack size from 128 to 150 as it comes dangerously close to overflow
2013-07-04 16:01:20 +07:00
0d37c4a319
refractor control request used in enumeration task to reduce task data
...
--> enum task now can work with 128 depth
2013-07-04 14:00:41 +07:00
391e132d6b
no big deal, only rename tusb_std_request_t to tusb_control_request_t
2013-07-04 12:25:39 +07:00
51e9a1817b
change some license text
2013-07-03 13:14:14 +07:00
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00
539c7cdbe1
update usbh_xfer_isr to take actual byte transferred and correct tests
2013-07-02 17:37:55 +07:00
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
7e5c6ded2d
add tusbh_cdc_serial_is_mounted API
...
test for cdch close driver
2013-07-02 15:32:41 +07:00
12526b34a1
extract qhd_xfer_error_isr
...
add support for period list in xfer_error_isr
pass period TUSB_EVENT_XFER_ERROR & TUSB_EVENT_XFER_STALLED tests
2013-07-02 12:22:46 +07:00
9fea5291bf
refractor extract list_next
...
add support for TUSB_EVENT_XFER_STALL
add test for error/stall in periodic list
2013-07-02 12:01:51 +07:00
958d390a85
refractor code
2013-07-01 20:28:16 +07:00
3f9f3f08d2
add cdc host driver close cdch_close
...
refractor
- add helper function in ehci qhd_next & qtd_next
- extract function qhd_create_pipe_handle
rename tusb_transfer_type_t to tusb_xfer_type_t
add some handling for stall
2013-07-01 18:53:25 +07:00
d8bd749c75
change control xfer check in usbh_xfer_isr
...
rename
- async_list_process_isr to async_list_xfer_complete_isr
- period_list_process_isr to period_list_xfer_complete_isr
extract function void qhd_xfer_complete_isr(ehci_qhd_t * p_qhd, tusb_transfer_type_t xfer_type)
2013-07-01 16:14:46 +07:00
3f0d740776
rename usbh_isr to usbh_xfer_isr
2013-07-01 15:30:29 +07:00
35adca5ba3
house keeping
2013-07-01 11:37:53 +07:00
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
3bca56665c
add mutex support for osal
...
add test for mutex in test_osal_none.c
implement usbh_control_xfer using mutex to get access to queue xfer on control pipe
(while semaphore is used to sync with hcd DMA)
failed to issue control xfer: set idle & get report descriptor in hidh_open_subtask (more to work on)
2013-06-27 16:19:22 +07:00
c81c4bb817
add set idle request for hidh_open_subtask
...
add interface number to hidh_interface_info_t
refractor hidh_open_subtask to be a true subtask
cannot run with set idle code ON because of semaphore misuse
2013-06-27 03:20:14 +07:00
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
fe53297b17
fix bug with custom class that terminate xfer after the first QTD
2013-06-22 22:26:00 +07:00
54c065b1d5
fix license
2013-06-22 12:54:47 +07:00
5c564df8c1
add api for hcd: hcd_pipe_is_idle
...
add api for usbh: tusbh_device_get_mounted_class_flag
implement api for custom class
- is mounted
- read
2013-06-21 14:20:08 +07:00
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
ed217948b8
rename descriptor type, hid descriptor type
2013-05-25 17:19:18 +07:00
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
327519a5a6
refractor test
...
try to add travis-ci
2013-05-09 13:48:11 +07:00
63add70139
test clean up
2013-05-09 12:49:52 +07:00
861f02943d
add log2_of and use this function in get_period_head
2013-05-06 20:51:34 +07:00
fd49cff8e8
add stub for msc host & hub driver
2013-05-06 20:09:06 +07:00
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
fdd98e2fa9
clean up main
2013-04-28 00:00:48 +07:00
4db386525f
reduce delay after reset to 20ms
...
correct freeRTOS configCPU_CLOCK_HZ to correct M4 mcu clock
2013-04-27 14:17:06 +07:00
c0104b996e
implement hcd_port_speed_get
...
move port reset & speed detection from isr context to usbh enumeration task
- decrease time in isr significantly from 50 ms to 580us
fix bug with osal_task_delay for freeRTOS buil
2013-04-25 17:48:55 +07:00
3763e22c9a
change OSAL_TASK_DEF to decouple variable name with task name
...
implement osal_task_delay for freeRTOS & non_os
getting both no_os & freertos running with mouse + keyboard
2013-04-25 16:41:00 +07:00
92994c8192
add attribute warn unused result for osal_create_* function
...
taskify keyboard_app mouse_app & led_blinking
2013-04-25 11:55:24 +07:00
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
d4a2600ecc
- change OSAL_TASK_FUNCTION to have void* parameter (to be consistent with most popular RTOS)
...
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
2013-04-24 17:53:43 +07:00
hathach