9377fd6901
fix -Werror=null-dereference warning
2023-11-03 22:34:49 +07:00
4b9320e40e
fix race condition when dev0 is removed while enumerating
2023-11-03 22:22:13 +07:00
46106c6ef4
skip tuh_max3421_spi_cs_api() in hcd_init()
...
only call tuh_max3421_spi_cs_api() in SPI start/end transfer since
Arduino port use this to call begin/endTransaction()
2023-11-02 15:22:02 +07:00
06c9d9a79a
remove legacy driver st/synopsys
2023-11-01 16:36:28 +07:00
4c01c5a714
Merge pull request #2300 from hathach/add-u5a5
...
Add support for stm32u5a5 (highspeed with built-in femtoPHY)
2023-10-31 13:27:54 +07:00
214a4afa6a
dwc2 flush tx,rx fifo in dcd_init()
2023-10-31 11:53:40 +07:00
db3ff4b352
usb on u5a5 hs work well with correct VBVALEXTOEN/VBVALOVAL set
2023-10-31 11:26:31 +07:00
9f0223dccd
minor clean up
2023-10-31 10:58:15 +07:00
305ef5d48a
minor space format dwc2 driver
2023-10-30 22:22:27 +07:00
a4c542a7b4
addd dwc2_info.py/md update stm32u5a5 board clock & power configure, able to get passed otg clock reset
2023-10-30 22:21:58 +07:00
a91b720c2e
Merge pull request #2291 from hathach/minor-update-max3421
...
minor update for max3421
2023-10-30 11:10:03 +07:00
9cba9a753b
update s3 devkitm with max3421 pin following metro s3, check max3421 version to make sure it is valid
2023-10-27 17:40:53 +07:00
2d802e03e9
Update audio_4_channel_mic example for HS device.
2023-10-24 22:14:24 +02:00
a2390802f8
Merge pull request #2282 from HiFiPhile/uac_interl
...
UAC IN transfer improvements
2023-10-19 19:49:19 +02:00
d3fa3cdf48
Adjsut blackout time.
2023-10-18 17:05:35 +02:00
27a2c8cba4
adding nulceo stm32u5a5, fix clock configure issue
...
dwc2 core stuck at reset
2023-10-18 18:43:07 +07:00
dd588222c7
Merge pull request #2265 from bencowperthwaite/master
...
STM32U5 HS Support
2023-10-18 15:25:57 +07:00
ade8a19aef
Put sw_buf in USB section only if necessary.
2023-10-17 21:21:52 +02:00
e9d894fe66
Fix compile.
2023-10-17 21:03:29 +02:00
d83a210788
Add blackout time.
2023-10-17 15:18:05 +02:00
0a1d6cf4d0
Read sample rate directly from control transfer to eliminate callback.
2023-10-17 13:06:55 +02:00
656e1e416a
Add flow control for IN transfer.
2023-10-17 09:46:01 +02:00
8b2cb63da8
Fix naming nBytesPerSample.
2023-10-10 18:22:20 +02:00
b5c839f739
Merge branch 'master' of https://github.com/hathach/tinyusb into uac_interl
2023-10-10 15:02:25 +02:00
67e34267a6
change tuh_max3421_spi_xfer_api() signature
...
tested working with sam d21 and d51, not tested with nrf52, seem not
working with esp32
2023-10-04 18:00:32 +07:00
8348631bf5
improve esp32 ci, build esp32 with -DDMAX3421_HOST=1 for max3421 testing
...
revert change in hcd.h
2023-09-28 16:15:31 +07:00
6b8933cfe8
fix build with new freertos host example
2023-09-28 12:55:59 +07:00
277852afc1
fix esp32 msc example
2023-09-28 10:56:38 +07:00
76c43a5bdc
Merge branch 'master' into add-max3421-esp32
2023-09-27 17:52:18 +07:00
3b0ffd0f48
change hcd_int_handler(rhport, in_isr) signature: add in_isr
...
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
2023-09-27 15:51:03 +07:00
2f6592de7f
update max3421 to have hcd_int_handler_ext()
2023-09-27 11:30:18 +07:00
1168e4e163
Added support for USB2 HS peripheral (with integrated HS PHY) on STM32U59x chips
2023-09-26 15:27:17 +01:00
f6ca86c3dd
tested cdc_msc_hid_freertos with samd51
...
add -Wno-error=format for espressif
wrap up cdc_msc_hid_freertos
2023-09-26 19:09:36 +07:00
a7c136c03f
adding host/cdc_msc_hid_freertos example
2023-09-25 16:53:11 +07:00
6be7f354c2
Fix cast-align.
2023-09-19 16:35:05 +02:00
9d0251f7a6
Fix UAC interleaved copy.
2023-09-19 15:42:52 +02:00
81cd995108
add default CFG_TUH_MAX3421 = 0, default spi speed for samd21/samd51 to 12Mhz
2023-09-18 22:15:31 +07:00
e9ba93315c
Merge pull request #2245 from arduino/fix_msd_extraneus_bytes_on_reading
...
Fix msd extraneus bytes on reading
2023-09-12 12:53:52 +07:00
c074488f75
minor rename
2023-09-09 12:20:16 +07:00
228acbeac2
wait_pipe_fifo_empty() now returns bool (as expected using TU_ASSERT macro)
2023-09-08 15:48:05 +02:00
7ce4cfa638
renesas: added wait function for IN transaction
...
This fixes a problem found on MSD class where data read from from disks were sometimes partially overwritten by the status MSD message ("USBS...").
The function introduced wait for the hw fifo pipe to be empty, that prevent that new writing in the fife overwrite data which are not yet be transmitted by hw.
2023-09-08 10:49:05 +02:00
21ab40bab2
- wrap up hcd max3421, work well with nrf52840
...
- also add usbh_defer_func()
2023-09-07 12:38:18 +07:00
1b9108ea0d
minor debug clean up
2023-09-06 17:11:35 +07:00
ed0a233d48
vastly improve attach/detach device, still have issue where thing is still hanged occasionally.
2023-08-31 21:28:27 +07:00
3b7d5aa042
improve connection & disconnection detection. But there is still issue when CONDETIRQ occurs but we are disabled interrupt (for osal queue access).
2023-08-31 16:52:09 +07:00
41493426b3
use ep buf to keep setup packet, work well with hid device
2023-08-30 16:21:43 +07:00
1ab488eb06
call xfer_complete_isr() when result is not successful (stalled or failed)
2023-08-30 16:04:18 +07:00
2a814a99af
- hcd_setup_send() also check for busy flag
...
- xact_inout() to support send setup
2023-08-29 20:27:37 +07:00
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
hathach