Reinhard Panhuber
9ddcfc09d7
Fix wrong comments, rename pos to offset, rename overflow().
2020-09-25 15:58:28 +02:00
Reinhard Panhuber
52c9a467b4
Fix bug in modulo substitute.
2020-09-23 21:36:30 +02:00
Reinhard Panhuber
9bdeafb295
Change maximum depth to 2^15 which allows for a fast modulo substitute.
...
Thus, however, overflows are detectable only for one time FIFO depth.
2020-09-23 20:48:03 +02:00
Ha Thach
8b2c822557
Merge pull request #512 from mzero/fix-midi-sysex
...
Fix a bug in writing SysEx messages.
2020-09-23 11:23:53 +07:00
Reinhard Panhuber
21299f90fa
Final cleanup.
2020-09-19 11:46:43 +02:00
Reinhard Panhuber
9dfb78e9d8
Tested, working.
2020-09-15 20:40:41 +02:00
Jerzy Kasenberg
62a76c0e04
nrf52: Fix edpt_dma_start() wrong condition check
...
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.
This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
Ha Thach
745c15d5b5
Merge pull request #508 from hathach/fix-edpt-race
...
Fix edpt xfer race condition
2020-09-14 23:56:21 +07:00
Reinhard Panhuber
349c0f640e
Implementation done, yet to be tested.
2020-09-14 18:24:08 +02:00
hathach
9c0d15fc43
more const
2020-09-14 22:23:59 +07:00
hathach
23e6ee2ea2
cdc device: claim endpoint before checking fifo availability
...
- add pre-check to reduce mutex lock in usbd_edpt_claim
2020-09-14 22:14:31 +07:00
Mark Lentczner
3b0216d3bf
Update midi_device.c
...
Fix a bug in writing SysEx messages.
At the start of a new USB packet (4 bytes), while in the middle of a SysEx, the code mistakenly
set the buffer length to 4, not the target length. As a consequence, the 3rd and 4th bytes from
the last packet were included, after every byte of the SysEx after the first packet of three.
The fix is simple, as it was just a typo, as can bee seen from the other branches in the same
section of if/else statements: At the start of a new packet, the code should set up the target
length... the buffer length should be left at 2 (as set on line 180).
2020-09-13 15:05:18 -07:00
hathach
5931d19666
correct the TUD_HID_REPORT_DESC_GAMEPAD
2020-09-13 15:01:20 +07:00
hathach
1804dba615
typo
2020-09-12 08:48:49 +07:00
hathach
ce4a9b9c3a
clean up
2020-09-11 00:14:07 +07:00
hathach
801f8b5b38
update claim edpt for hid and midi
2020-09-10 23:32:08 +07:00
Jan Dümpelmann
b15c209805
Set new define because of build failure
2020-09-10 13:36:07 +02:00
hathach
ed6d48b81e
typo
2020-09-09 16:45:54 +07:00
hathach
fe1b5dfa23
clean up
2020-09-09 16:29:45 +07:00
hathach
33f0a18523
update cdc edpt read
2020-09-09 16:25:31 +07:00
hathach
8b9893cada
introduce optional usbd_edpt_claim, usbd_edpt_release which can be used to gain exclusive access to usbd_edpt_xfer
2020-09-09 15:48:11 +07:00
hathach
2b54dcb9f6
move functions around
2020-09-07 15:39:46 +07:00
hathach
7a3b24827e
clean up
2020-09-07 15:25:03 +07:00
hathach
66a10ec9c8
rework usbh control transfer
...
use series of complete callback instead of blocking semaphore, which is
more noOS friendly. still working with hid host
2020-09-07 15:19:20 +07:00
Reinhard Panhuber
4e789b240d
Start of sampling works.
2020-09-06 11:37:59 +02:00
hathach
b3e81673c0
change xfer_cb return type from void to bool
2020-09-06 12:11:07 +07:00
hathach
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
hathach
9a6d7c648e
clean up enum task
2020-09-05 21:12:43 +07:00
hathach
828f720207
refactor hub class
...
- separate connect/disconnect handling
- hub work with full speed, but doesn't seem to work with Low speed
device (with mcb1800)
- need to update msc host after migrating from isr to xfer_cb (blocked
at inquiry)
2020-09-05 20:20:45 +07:00
hathach
7ffb6acc16
more clean up
2020-09-05 17:16:46 +07:00
hathach
b8b95e8494
add in_isr to all hcd event functions
2020-09-05 15:46:50 +07:00
hathach
90c8c14652
clean up
2020-09-05 15:19:01 +07:00
hathach
bc09b6065f
refactor extract parse_configuration_descriptor()
2020-09-05 15:16:45 +07:00
hathach
d87f2a9691
remove usbh control mutex
2020-09-05 15:05:25 +07:00
hathach
9531e47d10
update example to test with mouse
2020-09-05 14:59:07 +07:00
hathach
f7cf8cdf27
defer xfer_isr to xfer_cb
2020-09-05 14:41:31 +07:00
hathach
4d57b4ea33
clean up
2020-09-05 13:57:07 +07:00
Reinhard Panhuber
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
Jan Dümpelmann
9cc22b635c
Add functionality to abort an ongoing transfer
2020-09-04 15:40:23 +02:00
hathach
a8e538efe7
clean up
2020-09-04 01:35:32 +07:00
hathach
35aee4a6af
more hid host work
2020-09-03 23:57:51 +07:00
Reinhard Panhuber
338e96fa82
Remove tud_audio_n_write_ep_in_buffer() as long as ISO EPs are not RBs.
2020-09-03 18:09:46 +02:00
Jan Dümpelmann
4071e490e2
New function to modify fifo overwritability
2020-09-03 17:21:32 +02:00
Jan Dümpelmann
fd6cf9010b
Turn transmit fifo overwritable in no DTR mode
2020-09-03 17:03:13 +02:00
Jan Dümpelmann
d9eaa54e14
Remove connected check for write flushing
2020-09-03 16:40:53 +02:00
hathach
ef651e0734
fix #449 remove obsolete pipehandle from hid host
2020-09-03 17:07:29 +07:00
hathach
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
hathach
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
hathach
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
Reinhard Panhuber
8f0693346c
Allow epin_buf to be written directly into in case no TX FIFOs are used.
...
This is helpful if you have already encoded audio data and want an
efficient way to send it. However, this approach is NOT THREADSAFE so
far and works realiably ONLY IF tud_audio_n_write_ep_in_buffer() is NOT
called form an interrupt!
2020-09-01 11:26:16 +02:00
hathach
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
Reinhard Panhuber
83bd214203
Fix comment.
2020-08-29 13:26:41 +02:00
Reinhard Panhuber
43c4b53635
Fix CFG_TUD_AUDIO_RX_FIFO_SIZE defines.
2020-08-29 13:24:10 +02:00
Reinhard Panhuber
b9c9cfdbac
Change min to tu_min16.
2020-08-29 13:22:21 +02:00
Jerzy Kasenberg
b1f0d6f57e
audio_device: Change CFG_TUD_AUDIO_TX_BUFSIZE to CFG_TUD_AUDIO_TX_FIFO_SIZE
...
CFG_TUD_AUDIO_TX_BUFSIZE seems to be used only in 3 preprocessor
condition while in other places CFG_TUD_AUDIO_TX_FIFO_SIZE is used.
2020-08-25 14:45:40 +02:00
Jerzy Kasenberg
a3eff0c51a
audio_device: Fix NULL pointer access in audiod_xfer_cb
...
b_bytes_copied was pointer with NULL value instead of
plain variable.
NULL pointer was passed to audio_tx_done_cb() and dereference
as well.
Now variable is not a pointer.
2020-08-25 14:35:05 +02:00
Jerzy Kasenberg
a4c096be37
audio_device: Fix FIFO element size discrepancies
...
Buffer for TX and RX FIFO was not taking into account
size of element leading to out of bound access.
audio_tx_done_type_I_pcm_ff_cb() reported copied bytes was not returning
correct value number if channels was omitted in computation.
Transfer size calculation uses simpler arithmetic.
2020-08-25 14:35:05 +02:00
hathach
2d8787cdeb
fix typo
2020-08-24 15:29:34 +07:00
hathach
a1b7e767af
improve midi
...
- fix #436 tud_midi_rx_cb() not invoked
- fix xfer_cb() not handle ep in
- add ZLP if needed
2020-08-24 14:31:46 +07:00
Jerzy Kasenberg
c61e9fb96d
audio_device: Fix descriptor limit calculation
...
In several place p_desc_end calculation was not taking into account
that starting pointer (_audiod_itf[idxDriver].p_desc) was pointing
past interface association descriptor.
It would result in accessing random memory.
2020-08-24 09:04:42 +02:00
Ha Thach
19f08a02f6
Merge pull request #486 from kasjer/kasjer/add-endpoint-close-to-synopsys
...
Add dcd_edpt_close() to synopsys
2020-08-24 13:10:46 +07:00
hathach
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
Ha Thach
e5d622b749
Merge pull request #434 from gh2o/master
...
Add TX callback to CDC device
2020-08-21 11:14:06 +07:00
Reinhard Panhuber
37be0ca732
Fix formatting, get rid of all tabs.
2020-08-20 20:09:44 +02:00
Gavin Li
72183c7bb4
Slight optimization for cdc tx refill
2020-08-20 09:59:23 -07:00
Gavin Li
15b063beb2
Smarter CDC TX refill logic
2020-08-20 02:20:01 -07:00
Reinhard Panhuber
c14f68e2c1
Commit before sharing.
...
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
Reinhard Panhuber
6309364722
Merge remote-tracking branch 'upstream/master' into uac2
...
Conflicts:
src/device/usbd.c
src/device/usbd.h
src/portable/st/synopsys/dcd_synopsys.c
2020-08-16 14:08:24 +02:00
Reinhard Panhuber
444e4d2821
Add EP close. Fix bug in set_interface within audio.
2020-08-16 13:48:25 +02:00
Jerzy Kasenberg
e8d50a3c57
Add dcd_edpt_close() to synopsys
...
Endpoint close was implemented only in one driver so far.
This function is needed for interfaces with several alternate settings.
The way FIFO is allocated in dcd_edpt_open() allows to correctly close
only one IN endpoint (the one that was opened last).
2020-08-14 14:29:35 +02:00
Jerzy Kasenberg
88c5e2a37f
Fix synopsys fifo flush during stall
...
Wrong FIFO was flushed in dcd_edpt_stall().
(epnum - 1) should only be used when accessing DIEPTXF registers.
For DIEPCTL and GRSTCTL epnum is correct index.
2020-08-12 10:26:36 +02:00
hathach
61e96e97cb
use usbd_edpt_open in bth driver
2020-08-11 22:09:16 +07:00
hathach
a9d362185b
update note for app driver list mustbe accesible at all time.
2020-08-07 15:06:19 +07:00
hathach
01b9b77d3b
allow application driver to overwrite built-in one
...
- position application driver before built-in
- remove dcd.h from public include.
2020-08-07 14:47:32 +07:00
hathach
9df8057702
Merge branch 'master' into add-app-driver
2020-08-07 12:13:13 +07:00
Ha Thach
6f3378f71d
Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit
...
Fix synopsys odd/even frame bit for IN ISO endpoints
2020-08-05 22:36:05 +07:00
Jerzy Kasenberg
e9aa36a6e8
Fix synopsys odd/even frame bit for IN ISO endpoints
...
For ISO endpoint driver has to specify when data
is to be transmitted (odd or even frame).
Currently code was not updating this bit resulting in
data being sent every other frame.
If interval was 1ms full data packed was sent every 2ms, and
ZLP was sent in between.
2020-08-04 09:32:41 +02:00
hathach
7d9efd0697
manually submit unplugged event for nrf dcd_disconnect()
2020-08-04 14:18:12 +07:00
Ha Thach
026a1e7ac8
Merge pull request #478 from hathach/move-dcdconnect-to-dcdinit
...
Move pull-up enabling to dcd_init() instead of usbd
2020-08-04 14:11:32 +07:00
Reinhard Panhuber
c557bf7b2e
Implement dynamic FIFO RAM allocation according to configuration desc.
2020-08-03 19:48:05 +02:00
Ha Thach
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning
...
fix msp430 gcc 9.2.0 warning
2020-08-02 12:53:03 +07:00
hathach
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
Ha Thach
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event
...
correct isr context for nrf DCD_EVENT_UNPLUGGED
2020-08-01 12:31:48 +07:00
hathach
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
...
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
Jerzy Kasenberg
c3b0389f10
Fix synopsys size check for ISO endpoint
...
Constraint was incorrect for ISO endpoint as stated in TODO.
2020-07-31 15:52:21 +02:00
hathach
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs]
2020-07-29 17:04:47 +07:00
hathach
5af08e2ffc
fix strict prototype
2020-07-29 16:59:07 +07:00
Ha Thach
78f1576e93
Merge pull request #412 from hathach/fix-net-cast-align
...
suppress cast-align warnings for net device driver
2020-07-29 11:23:11 +07:00
Ha Thach
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos
...
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
2020-07-28 15:16:15 +07:00
me-no-dev
a1a390a788
Update dcd_esp32s2.c
2020-07-28 10:54:23 +03:00
hathach
6976e64217
fix msp430 gcc 9.2.0 warning in #465
2020-07-28 14:36:15 +07:00
Reinhard Panhuber
01903a4a6d
Implement dynamic reallocation of RX and TX fifos for EP0.
...
Tested with EP0 size 8/16/32/64.
2020-07-27 21:03:20 +02:00
Reinhard Panhuber
5e3f90cd6e
add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset
2020-07-26 19:21:30 +02:00
Reinhard Panhuber
1269bb440a
Fix structure definition audio_control_range_X_n_t
2020-07-25 14:31:25 +02:00
Reinhard Panhuber
e047fbe8fb
Merge remote-tracking branch 'upstream/master' into uac2
2020-07-25 14:26:24 +02:00
Reinhard Panhuber
d91843bcd2
Get and set requests work
2020-07-25 11:18:50 +02:00
hathach
503c15217e
example to call tud_init() after freeRTOS kernel is started
...
add note for usb init when using with RTOS
2020-07-23 09:20:45 +07:00
hathach
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
Ha Thach
7d2fc12445
Merge pull request #469 from hathach/followup-pr466-pr468
...
Followup pr466 pr468
2020-07-21 21:56:57 +07:00
hathach
dfca92d29b
follow up to pr468
2020-07-21 21:06:10 +07:00
Ha Thach
be744e1e01
Merge pull request #466 from chang196700/feature/string_desc_msos
...
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
2020-07-21 20:25:08 +07:00
Reinhard Panhuber
141db1278a
Make definition of CFG_TUD_AUDIO_CTRL_BUF_SIZE mandatory
2020-07-20 20:24:05 +02:00
Reinhard Panhuber
fdb156a3bb
Implement control EP0 buffer and get rid of CFG_TUD_AUDIO_USE_TX_FIFO
2020-07-20 20:18:45 +02:00
me-no-dev
3822a6a385
FreeRTOS: Yield from ISR to notify the USB task
...
If we do not yeld in ISR when we write to queue/give semaphore, the scheduler will not know of the change and will not check the queue untill the next OS tick. This change causes the task to be called immediately and makes communication many times faster.
2020-07-20 00:46:16 +03:00
Chang Feng
5cd654838b
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
...
Signed-off-by: Chang Feng <chang_196700@hotmail.com>
2020-07-19 19:13:17 +08:00
Reinhard Panhuber
077e881c92
Implement all missing A.17 control selectors
2020-07-19 11:53:35 +02:00
Reinhard Panhuber
47bcedc0b4
Add A.17.4 - Terminal Control Selectors
2020-07-18 19:27:00 +02:00
hathach
881025afdc
add new name warning to cdc and midi (skip msc, hid warning for now)
2020-07-17 23:01:39 +07:00
hathach
7baeea7a00
update actual link speed for spresense
2020-07-17 18:28:19 +07:00
Reinhard Panhuber
d0f3d03933
Intermediate commit.
2020-07-17 08:40:10 +02:00
hathach
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
hathach
0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
hathach
5ca748a68e
rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
...
rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
2020-07-16 15:34:16 +07:00
hathach
fea6fb73a1
add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun
2020-07-16 13:04:10 +07:00
hathach
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
Craig Hutchinson
323ae5a84f
Improve comment on CDC tud_cdc_write_available()
...
Fixes #460
2020-07-10 12:24:09 +01:00
Ha Thach
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
Ha Thach
dbced9911d
Merge pull request #447 from hathach/add-stm-hs
...
Add support for STM32 OTG HS core
2020-07-08 19:47:24 +07:00
hathach
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
Ha Thach
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
Uwe Bonnes
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
hathach
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
hathach
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
me-no-dev
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
hathach
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
hathach
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
hathach
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
Uwe Bonnes
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
hathach
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
hathach
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
hathach
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
hathach
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
me-no-dev
6178f8de2f
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
...
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
2020-07-01 13:38:59 +03:00
Ha Thach
0c9932440b
Merge pull request #452 from hathach/fix-dfu-rt
...
Fix dfu rt
2020-07-01 15:24:39 +07:00
hathach
12a145b27d
fix dfu-rt to response to SET_INTERFACE and DFU_GETSTATUS
...
fix #450
2020-07-01 01:33:02 +07:00
Jan Dümpelmann
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
Jan Dümpelmann
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
Uwe Bonnes
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
Uwe Bonnes
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
hathach
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
Ha Thach
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
Jan Dümpelmann
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
Jan Dümpelmann
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
Jeff Epler
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
hathach
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
Gavin Li
7ae47a9397
Call tud_cdc_tx_cb right after flush to keep tx fifo full
2020-06-20 22:12:10 -07:00
Reinhard Panhuber
28505cf03e
Merge branch 'master' into uac2
...
Conflicts:
src/device/usbd.c
2020-06-20 11:10:35 +02:00
Reinhard Panhuber
ada82b840f
Get update from tinyusb.
2020-06-20 10:51:21 +02:00
Jan Dümpelmann
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
Mengsk
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
Gavin Li
8fe887198b
Add tx callback to cdc device
...
Useful for continuous transmission of data, which is difficult currently
because there is no notification of tx completion.
2020-06-18 01:13:44 -07:00
Mengsk
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
hathach
2b1c7730b7
fix hs port1 build with net endpoint
2020-06-16 00:53:06 +07:00
hathach
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
hathach
2dd1be13e5
Enhance EP FIFO allocation for both Fullspeed and Highspeed
...
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
- Interrupt -> use EPSize
- Bulk/ISO -> use max(EPSize, remaining-fifo / non-opened-EPIN)
2020-06-15 23:17:49 +07:00
Reinhard Panhuber
bc7e24b659
Fix wrong comment for IAD checks.
2020-06-14 14:22:10 +02:00
Jan Dümpelmann
4399dd1b06
cherry pick PR399 commit : Interrupt time improvements
2020-06-14 19:13:31 +07:00
hathach
f438aedccb
overwrite setup packet
2020-06-14 18:29:38 +07:00
hathach
95966c2201
improve usbd log for control transfer
2020-06-14 18:29:02 +07:00
hathach
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
Reinhard Panhuber
b25bbf4776
Fix alignment.
2020-06-14 12:58:16 +02:00
Reinhard Panhuber
3012175351
Fix alignment.
2020-06-14 12:57:00 +02:00
Reinhard Panhuber
862d1667f0
Fix alignment.
2020-06-14 12:55:52 +02:00
Reinhard Panhuber
930817221d
Merge branch 'fix-too-strict-iad-checks' into uac2
...
Conflicts:
src/device/usbd.c
2020-06-14 12:36:59 +02:00
Reinhard Panhuber
48b2e6cf78
Fix too strict checks on subclass and interface of iad descriptor.
2020-06-13 13:51:50 +02:00
Reinhard Panhuber
4362665fb3
Fix mic audio descriptor, fix too strict check on IAD desc. in usbd.c
2020-06-13 12:36:05 +02:00
Reinhard Panhuber
d2f1bb58b3
Merge branch 'master' into uac2
2020-06-11 14:35:44 +02:00
Jerzy Kasenberg
0635bafe0a
Add DCD for Dialog DA1469x MCU
...
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.
This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
2020-06-09 15:55:46 +02:00
hathach
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
hathach
710c54f8cb
allow hs ep open with 512 bytes
2020-06-01 01:36:09 +07:00
hathach
f771afe6af
fixed EP0 size to 64 since LS is not supported in device mode
...
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
2020-05-31 23:43:29 +07:00
hathach
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
Ha Thach
5efeaf2ac1
Merge pull request #413 from kasjer/kasjer/ble-over-usb
...
Bluetooth HCI transport over USB
2020-05-31 15:07:56 +07:00
hathach
d6d29897f3
add get device qualifier descriptor
2020-05-28 23:16:16 +07:00
Jerzy Kasenberg
56d46483e4
Add bt hci device class
...
Code implements USB transport for bluetooth HCI.
2020-05-28 10:58:49 +02:00
Jerzy Kasenberg
077437b3dc
Add non standard request handling in class
...
For some reason bluetooth stack implementations send class requests
to device instead of interface.
To implement HCI interface over USB non device addressed requests
for class need to be handled.
2020-05-28 10:11:37 +02:00
hathach
53b749fd72
check max_len for vendor and hid
2020-05-28 14:44:26 +07:00
hathach
fb214f7cf7
rename to drv_len to be consistent
2020-05-28 13:57:49 +07:00
hathach
10cd3f24bf
initial transfer failed in open() shouldn't cause the driver open to fail.
2020-05-28 13:48:02 +07:00
hathach
c1db36a15c
update vendor open()
2020-05-28 12:19:06 +07:00
hathach
bec5b5f9da
update usbtmc open()
2020-05-28 12:13:48 +07:00
hathach
13860e9f94
update net open()
2020-05-28 11:51:25 +07:00
hathach
8f560bf275
update midi open()
2020-05-28 11:41:37 +07:00
hathach
89a3d1f6d1
update hid open()
2020-05-28 11:19:12 +07:00
hathach
7a15d2e0d2
improve msc
2020-05-28 00:56:33 +07:00
hathach
2eeeda1bcf
change signature for dfu runtime
2020-05-28 00:46:32 +07:00
hathach
e340404968
changing usbd driver open() return type, add max_len
...
only done with cdc and msc, push this interim for feedback first
2020-05-27 19:01:59 +07:00
hathach
d4bf777c94
try to get synopsys work with OTG HS + external PHY
2020-05-27 11:01:33 +07:00
hathach
b4804d1592
random clean up for tdi
2020-05-26 22:15:38 +07:00
hathach
0482f0d686
update h743eval with rhport=1 highspeed
2020-05-26 22:15:00 +07:00
hathach
947c3eb10d
multiple port support for global otg base
2020-05-26 16:07:48 +07:00
hathach
b7ab60aa44
suporting multiple port (OTG FS + HS) for stm32
2020-05-26 15:52:02 +07:00
hathach
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
hathach
d108ea4326
implement hcd_uframe_number for ohci
...
able to get 8 byte descriptors using LPC1769 + base, but failed to reset
and set address.
2020-05-22 21:45:34 +07:00
Reinhard Panhuber
9be2f1bf3d
Add basic UAC2 structure - untested
2020-05-22 12:09:34 +02:00
hathach
f308990ab5
Merge branch 'master' into update-host
2020-05-22 15:28:22 +07:00
hathach
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
hathach
8b66098335
fix freeRTOS logic
2020-05-20 15:21:11 +07:00