hathach
8d18d6077b
turn off TX FIFO Empty for EPIN if all bytes are written
...
fix dcd synopsys issue with usbnet #289
2020-04-26 22:14:59 +07:00
hathach
83353dd93f
add TODO for usbnet clean up
2020-04-26 22:03:05 +07:00
hathach
a1c599f4b6
clean up log message
2020-04-26 22:02:49 +07:00
hathach
9c8517a8d2
fix missing debug log macros
2020-04-26 14:58:23 +07:00
hathach
017c95037f
add usbd edpt open
...
- RTT mode is blocking to prevent log lost
- Improve logging message
2020-04-26 14:51:44 +07:00
Jerzy Kasenberg
b949ae596f
synopsys: Reduce interrupt time for IN ZLP
...
For IN endpoints output FIFO is filled in interrupt, therefor before
endpoint is enabled, DIEPTSIZ is set with correct size of packet.
Then endpoint is enabled and FIFO empty interrupt is enabled.
This works fine except for the ZLP. Enabling FIFO empty interrupt
results in interrupt handler being called all the time because
there is nothing to put in the FIFO.
Eventually it ends when IN token is received and empty
packed is transmitted out.
This change does not enable FIFO empty interrupt for ZLP reducing
CPU load.
2020-04-24 17:38:30 +02:00
hathach
c59fa77427
Revert "Merge pull request #359 from versioduo/midi-flow-control"
...
This reverts commit 1d33aa9b6f
, reversing
changes made to 718db7e536
.
2020-04-23 23:25:20 +07:00
Ha Thach
f8bb4c86ef
Merge pull request #376 from hathach/add-more-example
...
Add dynamic configuration example
2020-04-23 14:50:27 +07:00
Ha Thach
c39dc03331
Merge pull request #374 from duempel/stm32f1_synopsys_support
...
Added support for STM32F1 Connectivity Line MCU
2020-04-23 13:38:48 +07:00
hathach
10e035241f
house keeping
2020-04-22 23:04:21 +07:00
Jan Dümpelmann
551724498a
Added support for STM32F1 Connectivity Line MCU
...
STM32F105 and STM32F107 are using the Synopsys IP
2020-04-22 17:39:53 +02:00
hathach
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
hathach
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
hathach
3aa3c35986
Merge branch 'master' into add-rtt
2020-04-22 13:45:20 +07:00
Ha Thach
379b8ac556
Merge pull request #365 from pigrew/desc_tu_verify
...
tu_verify for getting descriptors
2020-04-22 12:24:05 +07:00
hathach
3b83813f01
clean up
2020-04-22 00:29:51 +07:00
Ha Thach
1d33aa9b6f
Merge pull request #359 from versioduo/midi-flow-control
...
MIDI - Add flow control to incoming packet stream
2020-04-22 00:11:27 +07:00
Nathan Conrad
0ec69de77c
sof is optional, revert other changes but remove unneeded check.
2020-04-21 10:06:17 -04:00
Nathan Conrad
d1656c0b8d
tu_verify for getting descriptors
2020-04-20 16:09:15 -04:00
hathach
bbcf9241bd
add back MIDI multiple jack
2020-04-20 23:46:17 +07:00
hathach
d57312602d
add extra comma to HID_REPORT_ID
...
this make the template with Report ID look less weird to the user
2020-04-20 16:09:17 +07:00
hathach
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
Kay Sievers
a0598ef369
MIDI - Add flow control to incoming packet stream
...
Larger SysEx transfers get corrupted by incoming packets.
This changes the FIFOs not to overwrite their data. MIDI should not be
a transport that drops packets. A potentially blocking device is easier
to detect and handle than a device that silently corrupts the packet
stream at random overflows, especially when SysEx messages are involved.
2020-04-19 11:44:15 +02:00
Ha Thach
f9262007ac
Merge pull request #258 from versioduo/midi-packets
...
MIDI packet interface
2020-04-19 15:43:07 +07:00
hathach
1f442c0a9a
also add wakeup event
2020-04-18 23:48:36 +07:00
hathach
c3fc5f1595
session end interrupt doesn't trigger on esp32 saola board
...
it is possibly due to the board design without vbus sense. Revisit
later.
2020-04-18 23:42:51 +07:00
hathach
fa71402e17
implement disconnection detection for stm32 synopsys
...
- disconnection is OTG INT session end bit
- add USE_SOF to disable 1ms interrupt on mcu which isn't used now by
the stack
- add suspend detection
2020-04-18 23:40:27 +07:00
hathach
ce6a81e74d
fix typo
2020-04-17 22:10:31 +07:00
hathach
464b1e8e89
correct return for write flush
2020-04-17 15:57:24 +07:00
hathach
4571ce0d29
add a bit of document for cdc device API. also improve cdc write flush when complete.
2020-04-17 15:54:20 +07:00
Ha Thach
0b1b9a2b9e
Merge pull request #260 from majbthrd/cdczlp
...
CDC device: fix behavior for transfers that are a whole multiple of endpoint buffer
2020-04-17 15:00:12 +07:00
hathach
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
hathach
05476d9ad7
Merge branch 'master' into remove-dcd-set-config
2020-04-17 13:38:22 +07:00
Ha Thach
85f0894fff
Merge pull request #347 from majbthrd/nuc505_config
...
nuc505: change dcd_set_config() behavior
2020-04-17 13:36:16 +07:00
Ha Thach
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
hathach
dddf30f532
added disconnect for spresense
2020-04-17 12:53:42 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
Ha Thach
4bbbba48cb
Merge pull request #351 from hathach/valentyusb-dcd-disconnect-connect
...
Valentyusb dcd disconnect connect
2020-04-17 09:52:29 +07:00
Ha Thach
19e2eb66c0
Merge pull request #350 from hathach/synopsys-msp430-dcd-disconnect-connect
...
Synopsys msp430 dcd disconnect connect
2020-04-17 09:51:15 +07:00
Ha Thach
9aa553ccc2
Merge pull request #352 from hathach/samg-dcd-disconnect-connect
...
samg implement dcd connect/disconnect
2020-04-16 23:14:42 +07:00
Ha Thach
33610751d7
Merge pull request #336 from pigrew/edpt_close
...
> If you notice my chain of events above, the bulk transfer was started BEFORE the SET_INTERFACE call. The USB device hardware swaps the order of them being delivered. On STM32, it gives priority to the lower-numbered EP index.
It shouldn't be a matter, control is 2+ stage, before sending the setup. Host should stop all communication to the endpoint that It wants to close.
2020-04-16 23:10:36 +07:00
hathach
36d4efa077
samg implement dcd connect/disconnect
2020-04-16 22:59:19 +07:00
hathach
6377699d77
implement dcd disconnect connect
2020-04-16 22:30:33 +07:00
Ha Thach
bfec3b4479
Merge pull request #345 from hathach/add-alt-itf
...
Implement setInterface(alt) for usb net driver
2020-04-16 21:33:03 +07:00
hathach
3aaad8cd73
add int enable/disable for pullup
2020-04-16 21:30:12 +07:00
hathach
18d936b414
msp430 disconnect/connect
2020-04-16 21:04:28 +07:00
Nathan Conrad
2994d100cd
Remove transfer queue filtering. May need to be revisited later.
2020-04-16 09:59:40 -04:00
hathach
63655ac9d7
cleanup for esp32
2020-04-16 20:43:26 +07:00
hathach
4c74140b31
stm32 sysnopsys disconnect/connect
2020-04-16 20:20:20 +07:00
hathach
a009775745
dcd disconnect/connect for transdimension ip
2020-04-16 16:56:16 +07:00
hathach
418b69f2db
implement dcd disconnect/connect for lpc ip3511
2020-04-16 16:05:57 +07:00
hathach
969121df4f
added dcd disconnect/connect to lpc17/40
2020-04-16 15:52:45 +07:00
hathach
2eed58d096
per review
2020-04-16 11:13:54 +07:00
Peter Lawrence
b9fca0bbb4
nuc505: change dcd_set_config() behavior
2020-04-15 14:16:48 -05:00
hathach
86ff5651ad
correct usbnet control complete response
...
don't return false with STD request get/setInterface() or targeted Data
Interface (itfnum +1)
2020-04-15 23:10:52 +07:00
hathach
0ddbda08cb
always response if GET_INTERFACE even if class driver does not support alt interface
2020-04-15 23:08:49 +07:00
Nathan Conrad
b0270f499b
stm32fsdev: dynamic allocation of PMA.
2020-04-15 11:53:30 -04:00
hathach
caa1dceed9
implement alternate setInterface() request
...
mostly forward these request (recipient = interface) to class driver.
2020-04-15 17:51:02 +07:00
hathach
d315393fbb
use IAD to assign itf2drv mapping correctly
...
merge net_data back into net driver
2020-04-15 16:18:24 +07:00
hathach
0b39168dc2
add IAD for CDC ECM, remove EEM descriptor template
2020-04-15 15:40:53 +07:00
hathach
b03b9eb939
change cdc template protocol to None
2020-04-15 15:14:26 +07:00
hathach
93ffe317b2
clean up
2020-04-15 13:53:50 +07:00
hathach
3bfb402d8c
clean up
2020-04-15 11:44:12 +07:00
hathach
1faa3b2768
tested usbnet, completely remove class code
2020-04-15 11:41:26 +07:00
hathach
c74f7e708e
remove class_code/subclass/protocol from driver structure, add name for logging
2020-04-15 11:06:35 +07:00
hathach
f1a6f92fab
Merge branch 'master' into class-driver-id
2020-04-15 10:47:49 +07:00
hathach
490771a094
test vendor
2020-04-15 10:39:01 +07:00
hathach
c1c9ca5629
test with tmc
2020-04-15 10:37:31 +07:00
hathach
e713b534fa
test ok with cdc and msc
2020-04-15 10:30:34 +07:00
hathach
bae570f7c7
tested with midi
2020-04-15 10:30:07 +07:00
Peter Lawrence
7fa8d87291
usbnet: remove CDC-EEM
2020-04-14 21:10:43 -05:00
hathach
8614dcece7
tested with hid
2020-04-15 01:01:07 +07:00
hathach
3ef6e33533
use class driver open() for interface support detection
...
tested with dfu_runtime
2020-04-15 01:00:37 +07:00
hathach
ae60146274
use explicit all_subclass and all_protocol since 0xFF is stil valid
2020-04-14 22:35:34 +07:00
Nathan Conrad
16f65890eb
Merge branch 'master' into edpt_close
2020-04-14 10:22:03 -04:00
hathach
b90b00d43b
complete adding subclass and protocol to driver id
2020-04-14 18:35:50 +07:00
hathach
593fe154ec
adding subclass & protocol to class driver structure
2020-04-14 18:00:59 +07:00
Ha Thach
57ffa94a52
Merge pull request #334 from majbthrd/usbnet_osagnostic
...
usbnet: OS-agnostic (Windows/Linux/macOS) network driver
2020-04-14 17:39:50 +07:00
Nathan Conrad
bbc59f1ceb
stm32fsdev: add static assert for PMA size bigger than EP0 size.
2020-04-13 20:50:17 -04:00
Nathan Conrad
de208b31cf
edpt_close: Remove item from queue instead of modifying it.
2020-04-13 11:05:34 -04:00
Nathan Conrad
f8e7487355
edpt_close: Updated based on feedback.
2020-04-13 09:51:46 -04:00
hathach
f4df829399
lpc17xx move set configdevice into set address
...
for removing dcd_set_config()
2020-04-13 17:04:18 +07:00
Nathan Conrad
0eeaccaf46
Skeleton, and initial stm32fsdev implementation (that leaks memory)
2020-04-12 21:27:27 -04:00
Peter Lawrence
bb3bbcc00b
usbnet: OS-agnostic (Windows/Linux/macOS) network driver
2020-04-12 15:41:18 -05:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
Ha Thach
13a3081d30
Merge pull request #333 from hathach/fix-esp32s2-setup-packet
...
fix incorrect setup packet
2020-04-11 15:18:41 +07:00
Ha Thach
07809d03a7
Merge pull request #332 from pigrew/stm32fsdev-dcdconnect
...
stm32fsdev: Implement dcd_connect.
2020-04-11 13:20:31 +07:00
hathach
ae1314f1c7
fix incorrect setup packet
...
also increase usbd stack in example when debug is enabled
2020-04-11 12:55:45 +07:00
Ha Thach
2ff3f765db
Merge pull request #319 from hathach/add-esp32s2
...
port ESP32 S2
2020-04-10 23:53:03 +07:00
hathach
a37a56acd3
remove CONFIG_IDF_TARGET_ESP32S2BETA per review
2020-04-10 23:38:36 +07:00
Nathan Conrad
5bd9d14fc1
stm32fsdev: set dcd_connect API definitions to strong, Modify documentation.
2020-04-10 10:26:41 -04:00
hathach
8953bc9255
added comment note for beta chip walkaround
2020-04-10 20:25:53 +07:00
hathach
c545cfc0bc
Correct dedicated FIFO SRAM size to 1024
...
add note for up to 5 active IN endpoints (including EP0 IN)
2020-04-10 15:42:50 +07:00
hathach
978eec73b3
remove 100us delay at the end of dcd_init()
2020-04-10 15:39:59 +07:00
hathach
30945ab9f3
revert name to dcd_int_handler due to function prototype warning
2020-04-10 15:27:23 +07:00
hathach
c0695b4b55
clear USB_RXFLVI_M before read_rx_fifo()
...
more format clean up
2020-04-10 15:13:12 +07:00
hathach
933e3cdfc7
change indent from 4 -> 2 spaces
2020-04-10 15:01:12 +07:00
hathach
cec747776d
rename dcd_init_handler to dcd_irq_handler to consistent with other ports
2020-04-10 14:47:02 +07:00
hathach
d122d7de88
remove commented code
2020-04-10 14:45:55 +07:00