6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
8ac115a33e
clean up
2019-09-09 12:25:39 +07:00
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
6e9324e29c
clean up
2019-05-15 18:16:48 +07:00
3278a9765b
ea4357 build with makefile, add to travis
2019-05-15 18:01:58 +07:00
7bd16aaf9b
add button for ea4357
2019-05-15 17:52:29 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
5f3ab2afe1
rename board_led_control to board_led_write
2019-04-02 18:16:04 +07:00
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
29e075b8b9
clean up bsp, adde board_millis()
2019-03-23 22:31:07 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
20fb416783
clean board uart read & write
2019-03-20 20:58:27 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
5d4d3431c2
host port plugged isr detect, but control xfer not work
2018-12-06 00:10:49 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
a9e015d619
forgot to add ea4357 files
2018-12-03 23:23:59 +07:00
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
920d88d256
clean up
2018-12-03 20:34:32 +07:00
f614586964
clean up
2018-12-03 20:33:17 +07:00
68a0e866c5
ea4357 led
2018-12-03 20:32:24 +07:00
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
b20cb8852a
build ok
2018-11-22 16:49:27 +07:00
c3c446f7db
adding lpc43xx to ses
2018-11-22 16:28:01 +07:00
4b1f4c7b6f
add Adafruit samd-peripherals as submodule.
...
clean up board
2018-11-14 00:22:49 +07:00
29071c10b1
rename CFG_TUSB_CONTROLLER_0_MODE to CFG_TUSB_RHPORT0_MODE
2018-04-14 14:08:48 +07:00
3d31f92106
rename OPT_MODE_
2018-04-12 13:17:58 +07:00
18f97fef7e
rename TUSB_OS_NONE, TUSB_OS_FREERTOS to OPT_OS_NONE, OPT_OS_FREERTOS
2018-04-12 12:55:53 +07:00
3c24671960
mass rename TUSB_CFG to CFG_TUSB
2018-04-10 14:31:11 +07:00
82da013dad
get freertos build
2018-03-30 15:33:36 +07:00
e2f9744369
rename tusb_hal_tick_get to tusb_hal_millis
...
rename TUSB_CFG_TICKS_HZ to BOARD_TICKS_HZ
2018-03-29 18:03:04 +07:00
ffca1f5e64
working on nrf52
2018-03-13 16:30:53 +07:00
889169d4d0
add new example device_virtual_com
2018-03-07 13:25:41 +07:00
b5f17fd823
move startup to bsp folder
2018-03-02 14:59:55 +07:00
dbe5ff2a35
re-org bsp
2018-03-02 14:53:40 +07:00
hathach