hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
hathach
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
hathach
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
hathach
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
hathach
df8d56f485
more document
2013-10-26 20:14:12 +07:00
hathach
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
hathach
b1142ff065
document hub
2013-10-24 17:00:04 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
hathach
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
hathach
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
hathach
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
hathach
7f4a3fc829
ignore multiple level of hub
2013-10-01 13:23:31 +07:00
hathach
71b2859fe5
handle unplug the hub itself
2013-10-01 13:09:52 +07:00
hathach
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
hathach
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
hathach
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
hathach
5eebec61f1
refractor hub
2013-09-30 17:14:44 +07:00
hathach
0f05d27ac9
refractor hub
2013-09-30 16:59:41 +07:00
hathach
9ecaec67b3
refractor hub
2013-09-30 16:40:02 +07:00
hathach
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
hathach
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
hathach
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
hathach
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
hathach
295612b48f
remove ATTR_WEAK for all necessary driver callback
...
fix ceedling tests
2013-09-21 00:42:39 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
hathach
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
hathach
a522263a9d
add implementation for
...
- tusbh_cdc_rndis_is_mounted
- tusbh_cdc_rndis_get_mac_addr
2013-07-19 02:30:22 +07:00
hathach
ce865721a5
add test & code to send rndis msg query for permanent address (MAC address)
2013-07-19 01:52:56 +07:00
hathach
3b12917fb0
extract send message & wait & get complete message to send_message_get_response_subtask
2013-07-14 08:33:39 +07:00
hathach
25304d142f
refractor qhd_xfer_error_isr (omit xfer_type para)
...
add accumulated total xferred byte for an endpoint until transfer with IOC set
- control xfer will have length of data phase in usbh_xfer_isr callback
2013-07-06 14:52:02 +07:00
hathach
68da489c2e
refractor ehci.c adding qhd_get_xfer_type
2013-07-06 13:41:48 +07:00
hathach
374aea7a11
change usbh_control_xfer_subtask to use flat API instead of passing tusb_control_request_t struct
2013-07-05 13:23:42 +07:00
hathach
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
hathach
aed07d83db
host enum task use static control_request variable instead of literal of requests
...
increase enum task stack size from 128 to 150 as it comes dangerously close to overflow
2013-07-04 16:01:20 +07:00
hathach
0d37c4a319
refractor control request used in enumeration task to reduce task data
...
--> enum task now can work with 128 depth
2013-07-04 14:00:41 +07:00
hathach
391e132d6b
no big deal, only rename tusb_std_request_t to tusb_control_request_t
2013-07-04 12:25:39 +07:00
hathach
51e9a1817b
change some license text
2013-07-03 13:14:14 +07:00
hathach
1667ef5041
replace tusbh_cdc_isr by tusbh_cdc_xfer_isr with extra parameter as
...
- pipe id
- xferred_bytes
host_class_driver_t add xferred_bytes parameter
void (* const isr) (pipe_handle_t, tusb_event_t); --> void (* const isr) (pipe_handle_t, tusb_event_t, uint32_t);
update hid_host & its tests
2013-07-03 11:36:08 +07:00
hathach
539c7cdbe1
update usbh_xfer_isr to take actual byte transferred and correct tests
2013-07-02 17:37:55 +07:00
hathach
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
hathach
7e5c6ded2d
add tusbh_cdc_serial_is_mounted API
...
test for cdch close driver
2013-07-02 15:32:41 +07:00
hathach
12526b34a1
extract qhd_xfer_error_isr
...
add support for period list in xfer_error_isr
pass period TUSB_EVENT_XFER_ERROR & TUSB_EVENT_XFER_STALLED tests
2013-07-02 12:22:46 +07:00
hathach
9fea5291bf
refractor extract list_next
...
add support for TUSB_EVENT_XFER_STALL
add test for error/stall in periodic list
2013-07-02 12:01:51 +07:00
hathach
958d390a85
refractor code
2013-07-01 20:28:16 +07:00
hathach
3f9f3f08d2
add cdc host driver close cdch_close
...
refractor
- add helper function in ehci qhd_next & qtd_next
- extract function qhd_create_pipe_handle
rename tusb_transfer_type_t to tusb_xfer_type_t
add some handling for stall
2013-07-01 18:53:25 +07:00
hathach
d8bd749c75
change control xfer check in usbh_xfer_isr
...
rename
- async_list_process_isr to async_list_xfer_complete_isr
- period_list_process_isr to period_list_xfer_complete_isr
extract function void qhd_xfer_complete_isr(ehci_qhd_t * p_qhd, tusb_transfer_type_t xfer_type)
2013-07-01 16:14:46 +07:00
hathach
3f0d740776
rename usbh_isr to usbh_xfer_isr
2013-07-01 15:30:29 +07:00
hathach
35adca5ba3
house keeping
2013-07-01 11:37:53 +07:00
hathach
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
hathach
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
hathach
3bca56665c
add mutex support for osal
...
add test for mutex in test_osal_none.c
implement usbh_control_xfer using mutex to get access to queue xfer on control pipe
(while semaphore is used to sync with hcd DMA)
failed to issue control xfer: set idle & get report descriptor in hidh_open_subtask (more to work on)
2013-06-27 16:19:22 +07:00
hathach
c81c4bb817
add set idle request for hidh_open_subtask
...
add interface number to hidh_interface_info_t
refractor hidh_open_subtask to be a true subtask
cannot run with set idle code ON because of semaphore misuse
2013-06-27 03:20:14 +07:00
hathach
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
hathach
fe53297b17
fix bug with custom class that terminate xfer after the first QTD
2013-06-22 22:26:00 +07:00
hathach
54c065b1d5
fix license
2013-06-22 12:54:47 +07:00
hathach
5c564df8c1
add api for hcd: hcd_pipe_is_idle
...
add api for usbh: tusbh_device_get_mounted_class_flag
implement api for custom class
- is mounted
- read
2013-06-21 14:20:08 +07:00
hathach
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
hathach
ed217948b8
rename descriptor type, hid descriptor type
2013-05-25 17:19:18 +07:00
hathach
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
hathach
327519a5a6
refractor test
...
try to add travis-ci
2013-05-09 13:48:11 +07:00
hathach
63add70139
test clean up
2013-05-09 12:49:52 +07:00
hathach
861f02943d
add log2_of and use this function in get_period_head
2013-05-06 20:51:34 +07:00
hathach
fd49cff8e8
add stub for msc host & hub driver
2013-05-06 20:09:06 +07:00
hathach
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
hathach
fdd98e2fa9
clean up main
2013-04-28 00:00:48 +07:00
hathach
4db386525f
reduce delay after reset to 20ms
...
correct freeRTOS configCPU_CLOCK_HZ to correct M4 mcu clock
2013-04-27 14:17:06 +07:00
hathach
c0104b996e
implement hcd_port_speed_get
...
move port reset & speed detection from isr context to usbh enumeration task
- decrease time in isr significantly from 50 ms to 580us
fix bug with osal_task_delay for freeRTOS buil
2013-04-25 17:48:55 +07:00
hathach
3763e22c9a
change OSAL_TASK_DEF to decouple variable name with task name
...
implement osal_task_delay for freeRTOS & non_os
getting both no_os & freertos running with mouse + keyboard
2013-04-25 16:41:00 +07:00
hathach
92994c8192
add attribute warn unused result for osal_create_* function
...
taskify keyboard_app mouse_app & led_blinking
2013-04-25 11:55:24 +07:00
hathach
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
hathach
d4a2600ecc
- change OSAL_TASK_FUNCTION to have void* parameter (to be consistent with most popular RTOS)
...
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
2013-04-24 17:53:43 +07:00
hathach
574710dde5
move main work in usbh_enumeration_task to its body subtask for task_assert style
2013-04-24 13:45:42 +07:00
hathach
d312be7006
fix potential error with usbh_control_xfer_subtask in subtask_assert
...
change back to use task_assert style in usbh_enumeraion
change test to task->subtask->subtask style in test/test_osal_none.c
2013-04-24 12:20:56 +07:00
hathach
73d5f00a40
rename OSAL_TASK_DECLARE to OSAL_TASK_FUNCTION
...
removing TASK_ASSERT to avoid using goto/continue statement with rtos configure
2013-04-23 15:35:27 +07:00
hathach
c20071c55c
fix compiler error for USB1 to none in ehci.c
...
rename and moving bsp ea4357
2013-04-22 11:00:43 +07:00
hathach
3f9a73a34d
change config to use USB0 only
...
fix some compiler warnings
2013-04-22 10:44:51 +07:00
hathach
ee9d53477a
complete the support for correct polling of 1ms 2ms 4ms 8ms
2013-04-21 16:24:42 +07:00
hathach
a493fab753
separate fake ehci's run async & period list
...
refractor list_find_previous_item & list_remove_qhd to act on ehci_link_t* instead of ehci_qhd_t*
fully support 1ms, 2ms, 4ms, 8ms for period list (each list has a dummy queue head)
- change period list structure
limit the maximum polling interval to 256 ms
add max_loop static MAX number of iteration for list_find_previous_item
add test for close 256ms polling interrupt
2013-04-21 15:09:54 +07:00
hathach
357888a5e5
rename nxp_sof_received to nxp_int_sof
...
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
2013-04-21 00:28:25 +07:00
hathach
fffe8b547d
- ehci: free error TD for recovery
2013-04-10 02:40:09 +07:00
hathach
2d7fbb5153
change keyboard_app.c & mouse_app.c from polling API to interrupt-based (callback isr)
...
and using OSAL for task-base demo
- fix ehci error with XFER_COMPLETE callback to usbh_isr, TD need to be freed & unlink before invoking
callback
- fix bug in usbh.c set device state to CONFIGURED right after SET_CONFIGURE control xfer
2013-04-10 02:34:40 +07:00
hathach
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data)
...
- support any size queue message (instead of fixed uint32_t)
2013-04-10 01:18:32 +07:00
hathach
a6cf4f228e
add tusbh_hid_mouse_isr & tusbh_hid_keyboard_isr callback with xfer_complete & error event
2013-04-09 03:13:27 +07:00
hathach
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1)
...
add back port reset after get 8 bytes of device descriptor
2013-04-09 02:13:18 +07:00
hathach
ef850984da
move MCU define to tusb_option.h, fix the ATTR with USB RAM
...
hack: add delay before the very first xfer when enumerating (finalize later
after reading USB 2.0 specs)
2013-04-08 03:45:31 +07:00
hathach
27f860db9f
rename hidh_keyboard_info_t to hidh_interface_info_t
...
rename tusb_bus_event_t to tusb_event_t
add test_mouse_init and more stuff for hidh mouse
move delay after port reset to only for speed detection
prioritize port change interrupt over xfer interrupt
- in case of unplugged, current connect change & xfer error both set
- xfer error only break to debugger if not because of unplugged
fix bug: set dev addr0 state to UNPLUG after close its control pipe in enumeration process
2013-04-07 05:09:18 +07:00
hathach
24ade0458e
fix compiling error for tests project
...
start to add support for host hid mouse
2013-04-07 03:53:53 +07:00