18d577abfb
fix out of range array in usbd
2014-03-14 17:32:01 +07:00
eff1fe99f8
clean all device os none warnings
2014-03-14 17:24:30 +07:00
4cdebe2e76
fix warning for device os none
2014-03-14 17:18:05 +07:00
8fbafc460c
fix a problem with dcd 13uxx dcd_pipe_clear_stall that should clear toggle for buffer0 (instead of active buffer)
...
as the next transfer is always forced to be happened on buffer0
2014-03-13 17:06:18 +07:00
1e957bb672
change dcd 176x alignment placement to work with IAR
2014-03-12 15:11:48 +07:00
0f0d9d127b
able to build lpc11u with IAR
...
clean ending warming with IAR
2014-03-12 14:43:58 +07:00
9ba209cda0
IAR line ending warning
2014-03-12 14:10:38 +07:00
8f03dea95a
fix iar warning
2014-03-12 14:03:17 +07:00
c92b03edfb
added scatter file for lpc11u & lpc13u for it to run with keil
2014-03-12 12:49:59 +07:00
6a736db159
try to port lpc11uxx device demo with IAR
2014-03-10 15:31:12 +07:00
b586fe632a
change desc_str_table to array of pointer of uint8_t* to be compatible with IAR (lack of support for VLA initialization)
...
IAR device os none works with ea4357
2014-03-10 14:20:38 +07:00
ad72db5aea
change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code
...
change pipe xfer API buffer from void* to uint8_t*
change FIFO_DEF to have a separated buffer to be compatible with IAR\
refractor IAR data alignment pragma
2014-03-10 13:13:13 +07:00
d5f278bbf0
clean up dcd_lpc175x_6x.c
2014-03-10 11:36:19 +07:00
a609cffda2
refractor dcd_lpc175x_6x
...
- remove dd allocation table and use fixed 2 dd for each endpoints
- change dd::used to dd::int_on_complete
--> fixed all the bugs with lpc175x_6x with MSC device & CDC device
2014-03-10 11:18:50 +07:00
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
03ad1afef9
clean up warnings
2014-01-24 22:04:59 +07:00
8bd6440547
fix error in dcd_lpc175x_6x (still has problem with control transfer)
...
fix build error for host
start to add keil support for device
opt out pca9532.c when ea4357 is not the selected board
2013-12-11 11:31:09 +07:00
a40d20387d
complete dcd 17xx control xfer with soft DMA
...
keyboard LED set report run ok with lpc17xx
there is problem with cdc set line encoding
2013-12-09 16:11:10 +07:00
b08ecda657
house keeping, lpc43xx works okie
2013-12-09 11:57:09 +07:00
2af9ecbed5
refractor dcd lpc43xx control xfer (with int on complete)
2013-12-09 11:49:34 +07:00
055285c559
minor refractor
2013-12-09 11:28:11 +07:00
e320659f8a
add keyboard led mask
...
make usbd control request to subtask
add get/set report via control pipe to hidd
enforce soft DMA to control pipe for lpc11u (lpc17xx not yet)
temp add led_blinking_set_interval to change led blinking interval
refractor dcd_pipe_control_xfer to have interrupt on complete option
add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-09 11:15:13 +07:00
2c8b8ea529
add board lpclink2, able to run device stack without any problems
2013-12-02 00:40:10 +07:00
24e92f79e7
adjust packet per TD for lpc13u is 1023, 11u is 64
2013-12-01 16:11:41 +07:00
a9a5146108
correct stall & clear stall behavior for non-control pipe
...
fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01 15:48:49 +07:00
edb4226f23
change class_ixr to class_cb
...
use IAD whenever enable CDC to make sure windows driver can detect
change keyboard, mouse send report to int_on_complete = true
2013-12-01 13:53:36 +07:00
e0db04e6b4
tested with lpc13u
2013-12-01 00:34:18 +07:00
864935fbe8
code clean up
2013-11-30 22:38:15 +07:00
6e30a068d2
completely change the dcd for lpc11u & lpc13u to overcome the fact that lpc11u dma cannot transfer more than 64 bytes
...
each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-30 22:29:37 +07:00
af87e231c5
house keeping
2013-11-26 14:17:58 +07:00
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
51def3f7ed
refractor usbd task
...
move control request data into task event
adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25 16:42:04 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
41ffcaf4a5
temp fix for dcd 43xx suspend detection (disconnection does not generate interrupt)
2013-11-22 16:10:05 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
d1ef89a154
fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED is correct
...
added disconnect callback for lpc11u/13u
2013-11-21 15:24:02 +07:00
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
6887e5e642
refractor usbd-dcd callback, add bus event isr
2013-11-21 12:47:55 +07:00
d94efa60d6
fixed dcd lpc17xx queue transfer & IOC handling
...
able to run MSC demo
2013-11-20 15:34:49 +07:00
850fcf03f0
refractor descriptor
2013-11-20 12:52:07 +07:00
dbfad50d43
house keeping
2013-11-20 12:21:29 +07:00
d284ecaccb
add sw int_on_complete support for dcd lpc17xx
2013-11-20 12:03:04 +07:00
2dafeee585
complete dcd for lpc175x_6x
...
cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-19 16:41:30 +07:00
94854f805a
get lpc17xx running through enumeration (with control data < 64)
2013-11-18 17:29:12 +07:00
b104d21e71
fix dcd_pipe_control_xfer for dcd43xx
...
refractor tusb_descriptors.h
2013-11-16 22:16:03 +07:00
672057de5a
IAD support
2013-11-15 17:20:40 +07:00
6e463caec0
add semaphore for control xfer for > 64 support for some mcu such as lpc11u/lpc17xx
2013-11-15 16:47:26 +07:00
d4a260c090
refractor usbd's get descriptor
2013-11-15 15:05:23 +07:00
699edf9485
separate data & status from dcd_pipe_control_xfer
2013-11-15 14:15:05 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
hathach