9f3e91a934
update nrf errata
2018-12-05 14:30:47 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
9176b7b1da
renane file
2018-12-05 08:51:11 +07:00
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
fe8346e642
move pinmux out of dcd into bsp
2018-12-04 18:38:01 +07:00
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
261e0f9801
adding lpc40xx support
2018-12-04 16:06:50 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
bf5ac608ff
rename dcd 18 43
2018-12-04 12:47:58 +07:00
1d6bbd9990
clean up dcd 43
2018-12-03 23:18:51 +07:00
29f721ba2c
dcd lpc43 clean up
2018-12-03 23:06:28 +07:00
9fec39d893
use lpcopen for lpc43x, work well
2018-12-03 22:58:21 +07:00
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
7f55bbaf05
clean up
2018-12-03 18:32:06 +07:00
9e33f19378
clean up
2018-12-03 17:47:37 +07:00
63faea3929
migrate lpc17 to lpcopen, usb device work ok
2018-12-03 17:43:16 +07:00
66bd9f0a16
wrap up lpc11u port
2018-12-03 13:15:28 +07:00
f28a15a886
clean up dcd lpc11u
2018-12-03 12:31:03 +07:00
57f7c18d77
dcd lpc11u6x work with cdc + msc
2018-12-03 00:04:55 +07:00
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
fb842bb804
lp11u able to receive setup packet
2018-12-01 22:21:54 +07:00
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
804c60304e
adding ses lpc13xx
2018-11-30 13:25:58 +07:00
3c49bfb588
remove obsolete example
2018-11-30 13:05:20 +07:00
1f076bd945
rename cont
2018-11-30 12:59:23 +07:00
0ab62e6fa2
more rename
2018-11-30 12:57:44 +07:00
658c2ff570
rename
2018-11-30 12:56:09 +07:00
723e02780d
clean up
2018-11-30 12:51:54 +07:00
d96347a0f5
rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX
2018-11-30 12:48:06 +07:00
522b0c11ef
move nvic prio in hal/dcd to bsp for portability
2018-11-29 22:59:00 +07:00
57b85262b2
added & tested lpc17xx freertos device example
...
- add USB priority check for freeRTOS config
2018-11-29 21:41:09 +07:00
15e4b97e36
lpc17xx add dcd_edpt_stalled
2018-11-29 20:09:02 +07:00
a76c5bf154
dcd lpc17xx, route control endpoint to EP_FAST
2018-11-29 19:58:17 +07:00
ed65a43977
clean up
2018-11-29 13:09:58 +07:00
402a5fee90
dcd lpc17xx enable EpIntEn for non-control IN after DMA complete
...
all transfer work well
2018-11-29 12:56:02 +07:00
c3140af274
correct TUD_OPT_HIGH_SPEED
2018-11-28 17:54:11 +07:00
772b2b692f
more dcd lpc17xx clean up
2018-11-28 17:31:15 +07:00
4a521d5085
clean up
2018-11-28 17:02:46 +07:00
04ad5da820
improve non-control xfer for lpc17xx
2018-11-28 16:53:36 +07:00
8b03b6d3b4
add Auto descriptor endpoint num config to support lpc17xx
...
CFG_TUD_DESC_*_EPNUM
2018-11-28 16:10:31 +07:00
b4103eef06
needs to be filled out. blinks though
2018-11-27 18:11:03 -08:00
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
16b3f11d9f
clean up
2018-11-27 21:53:36 +07:00
15f704b623
improve dcd control lpc17xx
2018-11-27 21:51:02 +07:00
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
80ecf1fd54
add OPT_MODE_HIGH_SPEED
2018-11-26 14:56:07 +07:00
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
47fabe42ed
One tweak to make -Wdiscarded-qualifiers happy.
2018-11-23 12:48:55 -08:00
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
246c28db1a
Turn off interrupts when working with the event queue.
2018-11-23 11:18:53 -08:00
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
394a22ecf7
remove pragma GCC diagnostic
2018-11-23 15:25:25 +07:00
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
a619ff88a3
rename xfer complete enum
2018-11-23 15:17:43 +07:00
cb8782e5f2
rename tusb_event_t to xfer_result_t
2018-11-23 15:14:47 +07:00
e61e9d8b1b
nrf5x add DCD_EVENT_UNPLUGGED event
2018-11-23 15:05:40 +07:00
4e8400e6fb
more clean up
2018-11-22 21:58:06 +07:00
a1faf5c9cb
clean up dcd lpc43xx
2018-11-22 21:37:23 +07:00
569e85a0c0
cdc work ok with lpc43xx
2018-11-22 17:40:20 +07:00
60d8cde695
rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION
2018-11-22 17:21:07 +07:00
4314be9aeb
msc device block count and block num
...
- replace CFG_TUD_MSC_BLOCK_NUM & CFG_TUD_MSC_BLOCK_SZ by
tud_msc_capacity_cb() (mandatory callback)
2018-11-22 12:11:06 +07:00
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
a0ce92bcfd
update dcd samd21
2018-11-21 13:01:39 +07:00
155edc7b00
fix ses irq vector
2018-11-21 12:36:28 +07:00
d036f62b0e
samd51 fix stable issue with dcd
2018-11-20 17:25:41 +07:00
c503d48ec4
clean up
2018-11-20 01:20:39 +07:00
cb37b819d9
rename control_state
2018-11-16 22:20:13 +07:00
00694b56c5
nrf5x: clean up dcd, add comment
2018-11-16 22:17:11 +07:00
7219ef8ed6
rename control.c to usbd_control
2018-11-16 22:00:16 +07:00
1640e7590e
remove control.h (move prototype to usbd_pvt.h)
2018-11-16 21:58:35 +07:00
215f8603b1
nrf5x: refactor device control transfer.
...
- make control transfer as part of usbd. Class driver must use
usbd_control_ API() instead of dcd_ api.
- change the signature of class driver's control_request
- allow control request complete to stall in staus stage
- move control request parser & handling to usbd.
2018-11-16 21:56:39 +07:00
b62ca2e5cd
nrf5x: correct control transfer direction
...
added dcd description.
2018-11-16 21:52:23 +07:00
95cd6c3a2f
remove control from class driver array
2018-11-14 23:39:58 +07:00
5757918df4
usbd clean up
2018-11-14 17:40:29 +07:00
ff26c5c6b1
clean up
2018-11-14 16:40:07 +07:00
10bf41f718
change osal_queue_receive() signature
...
- fix build issue with freertos
2018-11-14 16:31:28 +07:00
5732be224c
update example for PR. correct share_control definition
...
- rename dcd,hal to dcd_samd51, hal_samd51 since some IDE has issue with
duplicated names (e.g keil, ses).
2018-11-14 16:03:58 +07:00
983225ae60
Merge pull request #7 from tannewt/tinyusb_samd
...
Add SAMD support and simplify OS_NONE
2018-11-14 15:36:12 +07:00
3fe7cd1659
added tud_cdc_write_str, tu_fifo only use mutex for RTOS config
2018-11-13 15:45:22 +07:00
299a2f12de
Support the no CDC protocol as well.
2018-11-09 11:32:59 -08:00
537a29273c
Exempt from strict warnings for struct packing and add MCU options
2018-11-09 00:10:44 -08:00
30e3c64134
Polish up control split and treat it more like a normal endpoint.
2018-11-08 13:45:30 -08:00
7a40ec2647
Split out the control endpoint logic
2018-11-07 23:04:34 -08:00
c582c0fda9
Add SAMD21 and SAMD51 support for CircuitPython.
...
The ProtoThreads style subtasks were removed because it led to
extremely unclear control flow. RTOSes can be used if threading is
needed.
Also added some additional functionality to MSC to support dynamic
LUNs and read-only LUNs.
2018-11-07 12:02:28 -08:00
cb9bcce6a2
use mutex for cdc device fifo
2018-11-02 18:40:47 +07:00
e9de56ad83
defer DCD_EVENT_BUS_RESET, DCD_EVENT_UNPLUGGED to usbd task
2018-11-02 17:29:49 +07:00
f6076b0e06
add mutex support (optional) for tu_fifo
2018-11-02 17:28:07 +07:00
2708632a6a
clean up osal
2018-11-02 17:26:35 +07:00
4683dc1e68
add osal_mutex
2018-11-02 15:45:27 +07:00
b2f18744fe
add dcd event helper setup_recieved and bus_signal
2018-10-25 15:02:43 +07:00
87d89cf5cb
fix nrf52 freeRTOS interrupt priority
2018-10-24 16:48:27 +07:00
bfa10016ae
rename verify_breakpoint to TU_BREAKPOINT
2018-10-24 12:37:43 +07:00
55427606ef
replace dcd_xfer_complete by dcd_xfer_complete()
2018-10-24 00:44:26 +07:00
e7a63324dd
clean up
2018-10-23 19:58:06 +07:00
177adf4bfa
replace dcd_bus_event() and dcd_setup_received() by dcd_event_handler()
2018-10-23 16:31:45 +07:00
3dd635f4c1
merge osal_queue_send_isr to osal_queue_send, osal_semaphore_post_isr to osal_semaphore_post
2018-10-23 15:53:29 +07:00
9ba624a974
rename UBSD_EVT_ to DCD_EVENT_
2018-10-23 15:12:30 +07:00
e97b14848b
rename usbd_event_t to dcd_event_t
2018-10-23 15:08:31 +07:00
959480d82c
clean up usbd
2018-10-23 13:12:19 +07:00
f339ac7a6a
clean up msc device
2018-10-23 12:48:49 +07:00
c7340f4b0e
clean up helper func
2018-10-23 12:19:32 +07:00
0ae54310d6
Merge branch 'develop' of github.com:hathach/tinyusb into develop
2018-10-22 12:21:00 +07:00
33c61bfda2
comment out cdc flush on write (for now). Since it has issue with circuitpython
2018-10-05 21:35:40 +07:00
99c5219dc1
rename queue.h to sys_queue.h to prevent name conflict
2018-09-28 01:59:47 +07:00
a6870add95
format queue.h a bit
2018-09-26 01:44:36 +07:00
c78540be0f
add sys/queue.h to common
2018-09-26 01:39:59 +07:00
a660fb0cfc
clean up, update nrfx to 1.3.0
2018-09-25 12:57:46 +07:00
8600c4b616
adding mynewt to osal
2018-09-04 14:20:51 +07:00
e6fdfe8ac7
rename file
2018-09-02 20:37:02 +07:00
1a4a27324b
clean up
2018-09-02 20:30:07 +07:00
dce2296756
allow no mode compilation (no host/device enabled). Handy for project without usb to compile such as nrf52832
2018-08-30 16:12:34 +07:00
e623fc656d
cdc flush on write() if queue more than epsize
2018-08-30 15:28:19 +07:00
4ef01d721a
clean up osal task and subtask
2018-08-30 15:21:15 +07:00
61e4a8c3d3
remove CFG_TUD_CDC_FLUSH_ON_SOF option
2018-08-30 15:20:15 +07:00
583326e535
nrf5x fix an issue with EP0STATUS require Easy DMA
2018-08-28 15:57:21 +07:00
c8b72e397e
add while loop to usbd task to run until task queue is empty
2018-08-28 15:56:43 +07:00
bb2a8fcebf
cdc device : rename epin_buf, epout_buf
2018-08-28 14:18:39 +07:00
b0d14e2e41
minor nrf52 driver correct
2018-08-28 13:15:03 +07:00
030c64b9cd
make tud_mount_cb() and tud_umount_cb() optional
2018-08-24 18:35:46 +07:00
460285f852
fix compiler static assert complain
2018-08-23 21:05:52 +07:00
23c7c2102b
fix compiler warnings
2018-08-23 20:54:51 +07:00
c5d2f661e7
rename common func to avoid conflict
2018-08-23 20:09:28 +07:00
7b35cd0203
add string desc helper
2018-08-21 14:51:59 +07:00
d996bd5295
correct cdc line coding memory align
2018-08-15 17:57:33 +07:00
cf43a6b53b
fix memory issue with usbd control xfer
2018-08-15 17:55:16 +07:00
e07b1acbed
rename VERIFY to TU_VERIFY to avoid conflict with application
2018-08-13 18:10:23 +07:00
b07124c623
fix issue with cdc write failed sometimes
2018-08-13 18:09:29 +07:00
d5e58ba024
clean up
2018-08-01 09:59:32 +07:00
6d96b12e27
improve auto descriptor
2018-08-01 00:50:04 +07:00
9444d45af6
dev hid enhancement, add report descriptor templates for keyboard, mouse, consumer, syscontrol, gamepad
2018-07-31 23:10:50 +07:00
a2b7b9ddb9
fix hid warning, move report descriptor template to hid.h
2018-07-31 14:59:39 +07:00
d1a9d52c05
rename to prevent confusion
2018-07-31 14:42:03 +07:00
cc143cccf4
move default option
2018-07-31 14:27:48 +07:00
191b73b58c
tud_hid_generic_get_report_cb and tud_hid_generic_set_report_cb are mandantory
2018-07-31 13:45:31 +07:00
1a0ffcee25
add tud_hid_generic_report()
2018-07-31 13:31:03 +07:00
8eeee22ffc
enhance device hid driver
...
seperate inteface and report
2018-07-30 17:01:20 +07:00
2910b8d77a
clean up
2018-07-30 15:49:16 +07:00
683bb574e7
hid device enhance
2018-07-29 14:03:48 +07:00
8b17c54609
fix hid generic various error
2018-07-28 22:42:44 +07:00
c729db2294
beter hid report
2018-07-28 18:14:30 +07:00
6034553be7
adding hid_generic support
2018-07-28 13:50:46 +07:00
9f61493020
change HID config, move HID boot config to part of auto descriptor only
2018-07-28 12:38:45 +07:00
456506045f
seperate CFG_TUD_HID_BOOT_PROTOCOL to CFG_TUD_HID_KEYBOARD_BOOT & CFG_TUD_HID_MOUSE_BOOT
2018-07-27 21:48:15 +07:00
cf6c534c19
add usb msc callback description
2018-07-27 17:20:15 +07:00
5dd02cbdd3
house keeping
2018-07-27 16:59:57 +07:00
72b600c393
update device msc callback
2018-07-26 22:41:46 +07:00
e362f5fd64
rename some scsi command struct, add SCSI_CMD_MODE_SENSE_6 to built-in support command
2018-07-26 16:57:30 +07:00
86c445cd71
move nrf_drv_usbd_errata to portable folder
2018-07-26 16:12:09 +07:00
faf88d00c2
clean up
2018-07-26 16:01:14 +07:00
f5b2912372
add tud_msc_set_sense(), update msc device to reponse with default sense (illegal request) when there is issue with scsi command
2018-07-26 15:59:13 +07:00
602315cd57
fix hid keyboard idle rate
2018-07-26 11:27:34 +07:00
8694285ad2
add SCSI_CMD_REQUEST_SENSE into device msc built-in command
2018-07-25 23:56:06 +07:00
226a4f8816
clean up device msc
2018-07-25 22:51:43 +07:00
93db46292a
update msc example
2018-07-25 22:35:02 +07:00
8fc1d151fc
correct msc stall behavior
2018-07-25 22:24:58 +07:00
be7b0caf2d
enhance device msc response in case of STALL response
2018-07-25 22:21:14 +07:00
544f9c1315
add dcd_edpt_stalled() API
...
- implement control endpoint get status, endpoint set feature
2018-07-25 21:21:33 +07:00
9365794623
clean up device msc API
2018-07-25 20:34:56 +07:00
d2ab4db25e
add scsi start stop unit struct, improve device msc, correctly stall unsupported scsi command
2018-07-25 16:56:57 +07:00
1982886f87
add control set boot protocol support and keyboard idle rate
...
- tud_hid_keyboard_is_boot_protocol()
- tud_hid_mouse_is_boot_protocol()
2018-07-25 15:58:52 +07:00
c3b082ab20
add tusb_usbser.inf for windows
2018-07-25 14:07:27 +07:00
2729937e87
add tud_msc_ready()
2018-07-25 12:26:08 +07:00
71934228d2
tested boot mouse working
2018-07-25 00:16:09 +07:00
67e52af936
fix boot mouse descriptor issue
2018-07-24 22:37:44 +07:00
a6fede4962
improve tud_hid_mouse API()
2018-07-24 20:51:50 +07:00
b370283174
rename tud_hid_mouse_busy to tud_hid_mouse_ready
2018-07-24 20:41:06 +07:00
17369cfda0
change tud_hid_keyboard_busy() to tud_hid_keyboard_ready() for positive meaning
2018-07-24 18:18:02 +07:00
bd2313aa8b
house keeping
2018-07-24 18:17:09 +07:00
255f832904
rename device mouse API
2018-07-24 16:55:30 +07:00
3dc1d847b8
rename device keyboard api
2018-07-24 16:52:38 +07:00
3400dfdf4e
nrf52840 boot mouse does not work, need more work
2018-07-24 00:45:07 +07:00
5f6cd49031
clean up include
2018-07-23 23:41:14 +07:00
51903a60c5
rename timeout_ API to tu_timeout API
2018-07-23 22:36:29 +07:00
361928f429
rename timeout_timer.h to tusb_timeout.h
2018-07-23 22:32:21 +07:00
176607dbe1
rename tud_hid_mouse_is_busy to tud_hid_mouse_busy
2018-07-23 22:30:24 +07:00
3e209f9c20
enhance device hid
...
- add CFG_TUD_HID_ASCII_TO_KEYCODE_LOOKUP
- add tud_hid_keyboard_send_keycode(), tud_hid_keyboard_send_char(),
tud_hid_keyboard_send_string()
- add timeout_blocking_wait()
2018-07-23 17:46:07 +07:00
262be103e0
add descriptor string count for tud_desc_set_t
2018-07-23 16:12:14 +07:00
2bff2a7d97
fix descriptor minor issue
2018-07-23 16:01:02 +07:00
4342325ee1
reworking device hid class driver
2018-07-23 15:25:45 +07:00
141ac25e3b
also added wanted char to fifo
2018-07-20 15:47:28 +07:00
421ae8fc82
nrf: move power setup out of stack (to application)
2018-07-17 23:55:56 +07:00
6129670e4a
forgot to add tud_cdc_read_flush()
2018-07-17 21:20:37 +07:00
798ce59ebd
revert usbd_control_xfer_st() implementation
...
enhance cdc with better multiple interfaces support
add default ep size for cdc and msc device CFG_TUD_CDC_EPSIZE,
CFG_TUD_MSC_EPSIZE
2018-07-17 16:04:55 +07:00
abb37e98ba
rename tud_cdc_flush() to tud_cdc_write_flush(), add tud_cdc_read_flush()
2018-07-14 23:43:19 +07:00
19b6bbfd14
add device cdc wanted char callback, cdc peek
2018-07-14 23:28:07 +07:00
e0c4e11ea3
use _usbd_ctrl_buf for control transferm refactor cdc device
2018-07-14 15:12:42 +07:00
7a1f40593f
only call class xfer callback associated with endpoint address
2018-07-13 18:01:16 +07:00
1efb552bfd
add ep2drv, rename descriptor offset
2018-07-13 17:48:26 +07:00
cd5b5d3a53
change mapping interface to driver instead of class code
2018-07-13 16:52:22 +07:00
dccb06ba7d
rename class driver close() to reset()
2018-07-13 16:09:26 +07:00
5f8882a6d7
remove unused usbd dev state
2018-07-13 15:08:38 +07:00
584b6f716d
more clean up
2018-07-13 14:44:44 +07:00
ffdd925854
clean up
2018-07-13 00:34:32 +07:00
a623f0c179
better multiple interfaces support for cdc device
2018-07-13 00:32:02 +07:00
a4292e5906
changing cdc device to support multiple interface (not yet)
2018-07-12 23:08:54 +07:00
44c494106f
clean up
2018-07-12 22:42:03 +07:00
925c462b72
rename CFG_TUD_ENUM_BUFFER_SIZE to CFG_TUD_CTRL_BUFSIZE
2018-07-12 22:40:22 +07:00
3134d21b24
dropping multiple port device support
2018-07-12 22:25:06 +07:00
a0849fee9f
add nrf errata check temporarily part of hal_nrf
2018-07-10 22:08:03 +07:00
5d8cf5cf8f
fix ITF count
2018-07-10 00:56:58 +07:00
15cd30629a
clean up usbd auto desc
2018-07-10 00:36:07 +07:00
40de723d41
allow tusb_init() to call multiple times
...
enhance nrf5x
2018-07-05 00:23:47 +07:00
fc139b009f
add CFG_TUD_MSC_VENDOR,CFG_TUD_MSC_PRODUCT, CFG_TUD_MSC_PRODUCT_REV for msc inquiry response
2018-07-04 15:00:46 +07:00
3eb410cf85
add CFG_TUD_MSC_BLOCK_NUM, CFG_TUD_MSC_BLOCK_SZ msc device auto response to scsi read capa and read format cap
2018-07-04 14:39:32 +07:00
3e66d2d31e
rename fifo * to tu_fifo to avoid conflict with other module
2018-07-04 00:22:15 +07:00
ec3227b220
add TUD_DESC_STRCONV
2018-07-03 16:39:42 +07:00
1faf0a81e4
clean up
2018-07-02 17:32:09 +07:00
1ee2bee5c8
clean up
2018-07-02 11:09:22 +07:00
142300ca60
remove sdk, add nrfx as submodule
...
update segger project to work with nrfx
2018-07-02 11:00:05 +07:00
a08cb6e727
clean up
2018-07-01 15:54:40 +07:00
19eb62ebe4
update auto descriptor
2018-07-01 15:45:04 +07:00
ff219f1f01
add CFG_TUD_DESC_AUTO for auto descritpor (device, config)
2018-07-01 15:11:58 +07:00
cfd5e1e6d1
clean up
2018-06-24 22:30:44 +07:00
6b2b6aaa3f
fix msc device with transfer len > 65k bytes
2018-06-24 00:16:22 +07:00
84ef486418
enhance and fix bug with dcd for nrf5x
...
fix issue with large enough bulk out.
2018-06-23 13:20:07 +07:00
b9f8575e2d
clean up device cdc
...
separate cdc tx & rx bufsize
2018-06-23 13:19:36 +07:00
d438000b99
clean up
2018-06-22 16:01:55 +07:00
e3591ac682
enhance usbd: add usbd_defer_func()
2018-06-22 12:53:13 +07:00
af268ce951
clean up
2018-06-22 00:43:41 +07:00
5f1bec943b
fix msc block count get
2018-06-21 12:20:21 +07:00
a6a06bca69
update msc device adjust lba for read10, write10 callback
2018-06-19 22:59:54 +07:00
19807f0c07
clean up
2018-06-19 22:59:16 +07:00
3ace03cbc7
re-increase cdc buffer for nrf52840 due to bulk out issue
2018-06-19 15:16:26 +07:00
f8e7695fe9
clean up
2018-06-18 14:31:15 +07:00
424735d440
rename subfolder source to src
2018-06-18 14:05:24 +07:00
hathach