3f9a73a34d
change config to use USB0 only
...
fix some compiler warnings
2013-04-22 10:44:51 +07:00
ee9d53477a
complete the support for correct polling of 1ms 2ms 4ms 8ms
2013-04-21 16:24:42 +07:00
a493fab753
separate fake ehci's run async & period list
...
refractor list_find_previous_item & list_remove_qhd to act on ehci_link_t* instead of ehci_qhd_t*
fully support 1ms, 2ms, 4ms, 8ms for period list (each list has a dummy queue head)
- change period list structure
limit the maximum polling interval to 256 ms
add max_loop static MAX number of iteration for list_find_previous_item
add test for close 256ms polling interrupt
2013-04-21 15:09:54 +07:00
357888a5e5
rename nxp_sof_received to nxp_int_sof
...
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
2013-04-21 00:28:25 +07:00
a9010c1786
getting build with freertos & host demo
2013-04-16 16:48:19 +08:00
fffe8b547d
- ehci: free error TD for recovery
2013-04-10 02:40:09 +07:00
2d7fbb5153
change keyboard_app.c & mouse_app.c from polling API to interrupt-based (callback isr)
...
and using OSAL for task-base demo
- fix ehci error with XFER_COMPLETE callback to usbh_isr, TD need to be freed & unlink before invoking
callback
- fix bug in usbh.c set device state to CONFIGURED right after SET_CONFIGURE control xfer
2013-04-10 02:34:40 +07:00
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data)
...
- support any size queue message (instead of fixed uint32_t)
2013-04-10 01:18:32 +07:00
e6a44b3fe9
add test & code for TUSB_EVENT_INTERFACE_OPEN for tusbh_hid_keyboard_isr tusbh_hid_mouse_isr
2013-04-09 13:28:07 +07:00
a6cf4f228e
add tusbh_hid_mouse_isr & tusbh_hid_keyboard_isr callback with xfer_complete & error event
2013-04-09 03:13:27 +07:00
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1)
...
add back port reset after get 8 bytes of device descriptor
2013-04-09 02:13:18 +07:00
94e25880dc
- add scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence
...
- USB1 host run ok with NGX4330
2013-04-08 14:57:00 +07:00
ef850984da
move MCU define to tusb_option.h, fix the ATTR with USB RAM
...
hack: add delay before the very first xfer when enumerating (finalize later
after reading USB 2.0 specs)
2013-04-08 03:45:31 +07:00
4b63a2bc5c
- fix HID_MOUSEBUTTON right & left
...
- add mouse app to mount mouse interface
2013-04-07 19:33:40 +07:00
dfe2b94248
refractor extract hidh_interface_get_report from keyboard_get_report
2013-04-07 18:38:32 +07:00
ff63a86a4d
add complete isr for hidh mouse
...
refractor hid_host.c
- extract hidh_interface_open from hidh_keyboard_open
- extract hidh_interface_close from hidh_keyboard_close
-
2013-04-07 18:29:30 +07:00
058e2a9837
add test code & implement
...
- hidh_mouse_open
- tusbh_hid_mouse_status
- tusbh_hid_mouse_get_report
2013-04-07 18:10:01 +07:00
10c08ab404
add test for mouse_open
...
add hid descriptor for mouse & mouse interface to descriptor_test
refractor extract function hidh_interface_status
fix error with MACRO HID_REPORT_ITEM with zero data size --> redundant semicolon
2013-04-07 15:48:01 +07:00
3d8a4ef8c8
remove hcd_port_reset before set address in enumeration
...
add test & implement tusbh_hid_mouse_is_supported
2013-04-07 14:44:53 +07:00
27f860db9f
rename hidh_keyboard_info_t to hidh_interface_info_t
...
rename tusb_bus_event_t to tusb_event_t
add test_mouse_init and more stuff for hidh mouse
move delay after port reset to only for speed detection
prioritize port change interrupt over xfer interrupt
- in case of unplugged, current connect change & xfer error both set
- xfer error only break to debugger if not because of unplugged
fix bug: set dev addr0 state to UNPLUG after close its control pipe in enumeration process
2013-04-07 05:09:18 +07:00
24ade0458e
fix compiling error for tests project
...
start to add support for host hid mouse
2013-04-07 03:53:53 +07:00
1776bb53f6
add hal init for USB1 and trying to get USB1 working
...
add hack delay 100 ms after a port reset (huge) for correct speed detection
2013-04-07 03:40:24 +07:00
68dddefe7b
add control xfer for ehci controller fake: ehci_controller_control_xfer_proceed
...
refractor test code
2013-04-05 14:00:37 +07:00
fcb8e295ec
clean up, update tests for hcd_port_reset after 8 byte descriptor & set configure before open class driver
2013-03-29 23:37:59 +07:00
e658e67ebe
fix the damn bug within 10 line of code in keyboard_app.c
2013-03-29 00:20:27 +07:00
7b5d9edc5a
add test for pipe_interrupt_xfer
...
implement keyboard app code
- forcefully place keyboard_report in RAM section 3
change used bit in qtd from reserved in buffer[1] to alternate link
add code for fake ehci controller runs on period interrupt
change signature of tusbh_hid_keyboard_get_report
- tusb_keyboard_report_t* to uint8_t*
implement period (interrupt) complete isr processing
2013-03-27 11:51:44 +07:00
b0ff7a7e23
add code & test for hidh_isr (set status for keyboard)
2013-03-26 17:04:55 +07:00
ac905a8d09
rename pipe_status_t to tusb_interface_status_t
...
add tusbh_hid_keyboard_status & test code
2013-03-26 16:39:25 +07:00
0b08dc7724
fix bug with enum task skipping decriptor
2013-03-26 14:18:14 +07:00
205a21ff04
add code for hidh close
...
refractor the full configure descriptor parsing in enum task
2013-03-26 13:45:14 +07:00
3c767e9f44
add field to endpoint maxpacketsize (mult)
...
refractor hidh_open_subtask & hidh_keyboard_open
add ATTR_PACKED_STRUCT(x)
- TODO remove ugly pre_pack & post pack
2013-03-26 13:07:42 +07:00
03d045ecde
- put ATTR_UNUSED to hardfault handler variables to discard compiler warning
...
- change host_class_driver_t: open_subtask signature to accept tusb_descriptor_interface_t const * instead of uint8_t*
2013-03-26 12:14:04 +07:00
54acee1fc8
start merge hidh_keyboard back to hidh
2013-03-26 11:41:41 +07:00
a7e8a2ba9a
pass all the current tests
2013-03-26 02:06:30 +07:00
086a8e4a2d
add flag_supported_class to usbh_devices
...
remove all ATTR_WEAK in init,open,isr,close driver functions of USBH-CLASS API
- prefer testing
2013-03-26 02:02:54 +07:00
ff03b452d9
remove multiple instances per device for hidh keyboard (no needed)
...
- API retain though
2013-03-25 22:06:00 +07:00
a2031e6218
refractor hidh_keyboard_open
2013-03-25 20:57:27 +07:00
f5e7644a1e
fix const discard warning
2013-03-25 18:07:33 +07:00
2622cc487b
add more test and complete keyboard open
2013-03-25 17:57:33 +07:00
d0a73f4b0d
add several helper function
...
add test & code for hidh_keyboard_open_subtask
- skip parsing HID descriptor for keyboard
2013-03-25 17:39:22 +07:00
c026a9f2e0
remove obsolete TUSB_CFG_HOST_HID_KEYBOARD_ENDPOINT_SIZE
...
temporarily ignore test for hid_host.c due to ceedling linking issue with weak symbol
implement hidh_open_subtask driver to subclass open
rename hidh_keyboard_install to hidh_keyboard_open_subtask
2013-03-25 16:02:24 +07:00
45db7b4a53
able to build test hidh
...
hack include in hid_host_keyboard.h
2013-03-25 13:51:44 +07:00
ddeec330fa
separate hidh_keyboard from hid_host
...
move test hid related to its own folder
2013-03-25 13:08:40 +07:00
56cd8be75e
change website from tinyusb.net to tinyusb.org
2013-03-25 11:46:30 +07:00
20a22d956d
changing the hcd_pipe_close behavior
...
- bulk/int/iso pipe can only be closed as part of unmount/safe remove process
add test for interrupt_close
2013-03-25 11:04:37 +07:00
b15694bc5f
fix potential bug when insert new queue head to list
2013-03-24 22:24:27 +07:00
62f5ec8a0f
period_frame_list0 is not existed if period list is not required
2013-03-24 21:53:41 +07:00
c7c993d6cc
refractor hidh keyboard
...
changing class hidh behavior
2013-03-24 21:40:49 +07:00
a1b17be681
add class flags
...
change keyboard_info_pool to keyboard_data
2013-03-24 17:29:07 +07:00
92c137243d
refractor
...
- rename usbh_device_info_pool to usbh_devices
- create a struct for control pipe in usbh_device_info_t
2013-03-24 16:44:59 +07:00
ea04815bbc
rename sem_hdl in usbh_device_info_t control_sem_hdl
2013-03-24 16:22:58 +07:00
55ce5cc4a2
add TUSB_DEVICE_STATE_INVALID_PARAMETER to tusb_device_state_t
2013-03-24 16:05:50 +07:00
439a3134b9
refractor
...
- rename tusbh_device_status_get to tusbh_device_get_state
- replace tusbh_device_status_t by tusb_device_state_t
2013-03-24 16:02:45 +07:00
ce63980386
clean up:
...
- refractor tusb_handle_device_t device_hdl to uint8_t dev_addr
add keyboard_app.c/h
2013-03-24 15:50:49 +07:00
e6630af5a4
clean up
2013-03-23 23:43:25 +07:00
0c5e0ef0f3
- add control_pipe_status for usbh_device_info_t to reflect the status transfer of control pipe
...
- fix bug with hcd_port_reset
+ remove regs->portsc_bit.port_enable in the wait loop as device unplugged can cause this to always fails
- correct the timeout for hcd_controll_stop/reset 16 uframes ~ 2 ms
- potentially fix bugs device unplugged when new address is not assigned
2013-03-23 18:36:43 +07:00
44e09cc397
enhance some tests
...
add test for usbh_isr error invoke
fix bug if device unplugged before is set to new address
- clean up & close control addr0 in usbh_device_unplugged_isr
2013-03-23 17:31:51 +07:00
4adfc6a6d8
change signature usbh_isr to add tusb_bus_event_t parameter
...
change singature of call_isr as well
2013-03-23 15:00:56 +07:00
e6b8166a58
house keeping
2013-03-23 14:27:32 +07:00
e14864759d
refractor
...
- rename TUSB_DEVICE_STATE_READY to TUSB_DEVICE_STATE_CONFIGURED
- move device_state to core/tusb_types.h
- remove usbh_device_hcd_data_cleaned_up_cb, hcd now set the state directly
2013-03-23 12:13:02 +07:00
d7ba86c85e
refractor
...
- rename usbh_device_info_t.status to state
- rename enum TUSB_DEVICE_STATUS_* to TUSB_DEVICE_STATE_*
2013-03-23 11:34:51 +07:00
0c6d406ddf
- house keeping
...
- add controller id for hal_interrupt_enable/disable
2013-03-23 10:56:41 +07:00
ae9b9ead7a
continue clean up ehci
2013-03-23 10:23:37 +07:00
58b252b3f1
clean up ehci
2013-03-23 10:14:47 +07:00
8beb749761
clean up
2013-03-23 09:57:08 +07:00
660440d69c
refractor extract to function qtd_remove_1st_from_qhd
2013-03-23 02:56:17 +07:00
eddaa8394b
fix issue with Interrupt Async Advance
...
- only acknowledge interrupt that we check
2013-03-23 02:51:41 +07:00
53a4164b39
use DO PING for highspeed out bulk
2013-03-22 21:50:07 +07:00
397d62db10
fix bug: adjust all bulk queue head from ehci_data.device
2013-03-22 21:21:00 +07:00
f6acca6664
add callback for hcd when it cleaned up all cache data for a device (previously mark as removing).
2013-03-22 18:55:45 +07:00
dbaf6c0d30
- fix bug when unplugged unmounted-already device (mostly plugged when power on)
...
- add hal_debugger_is_attached & hal_debugger_breakpoint
- assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed
- fix get control qhd function when dev_addr is not zero (shifted 1)
- fix wrong logic for unsupported class
2013-03-22 17:08:51 +07:00
cd2915e78c
house keeping
2013-03-13 21:45:06 +07:00
9bc30f7694
add some test for usbh_hcd integration
...
- add tests for pipe_close (while TDs are active)
- add tests for device unplugged
add tesst & implement the async_advance_isr to clean up "REMOVING" queue head
- add helper find previous qhd
- add remove qhd from async list
- add is_removing field for async advance isr to clean up
add pipe close for control pipe & bulk pipe (with tests)
add helper get qhd from pipe_handle
2013-03-13 21:42:19 +07:00
dbd3d9618d
refractor rename field inactive_next_xact of ehci_qhd_t
2013-03-13 12:29:44 +07:00
1a932e7437
refractor ehci test files
...
adding some code for async_advance_isr
add test for async_advance_isr
2013-03-13 12:25:27 +07:00
97c436a16e
add usbh_pipe_control_close (in conjunction with usbh pipe control open)
...
close control pipe when unplugged
2013-03-13 11:20:02 +07:00
97c9001d40
add hard fault handler to bsp.c
...
rename class_install_subtask to class_open_subtask
add class_close for unmount
adding code for usbh_device_unplugged_isr & invoke it in hcd_isr
2013-03-13 10:57:30 +07:00
63765b37c7
forget to add test file for ehci isr
2013-03-13 00:17:02 +07:00
79e277d323
go through all the enumeration (up to get full configuration)
...
- fix init_qhd for address 0 (clear queue head --> ehci controller halted)
- fix bug in usbh_init missing address0 for semaphore create
TUSB_CFG_DEBUG == 3: --> ATTR_ALWAYS_INLINE is null --> allow gcc to export "normal inline" function
2013-03-13 00:02:45 +07:00
d2bd80109e
add semaphore post in usbh_isr for control pipe
...
add osal_queue_send in usbh_device_plugged
add macro for placing breakpoint macros
fix ehci init:
- regs->cmd or (add run_stop)
- enable port power in portsc
add tusb_task_runner in main loop
2013-03-12 20:04:29 +07:00
60c2caf84a
implement port hcd_port_connect_status
...
clean up
2013-03-12 16:46:47 +07:00
80facf6f2e
add isr api for usbh_hcd
...
- void usbh_device_plugged_isr(uint8_t hostid, tusb_speed_t speed);
- void usbh_device_unplugged_isr(uint8_t hostid);
implement port_connect_status_isr
2013-03-12 16:42:19 +07:00
453ea39865
add project file for keil
...
fix binary.h compiler specific
add hal_init code to reset & set usbmode --> able to get USB ISR
remove const qualifier from return function of
- get_operational_register
- get_period_frame_list
- get_async_head
- get_period_head
- get_control_qhd
add stub for
- hcd_port_connect_status
- hcd_port_speed
2013-03-12 12:06:40 +07:00
38ff7123b4
add semaphore reset & queue flush API for osal
...
add semaphore reset when opening control pipe
2013-03-12 00:10:52 +07:00
8eaad2326b
add semphore reset & queue flush API
...
modify test to check control pipe semaphore created with usbh_init
2013-03-11 12:00:25 +07:00
c1ceec067f
add isr empty function for hidh and msch and usbh
2013-03-10 19:42:50 +07:00
c1848b8114
add code for ehci interrupt handler
...
- interrupt source identifying
- for async list process
refractor control_xfer to use insert_qtd_to_qhd
- add test for control xfer interrupt processing
- add code for faking ehci controller async list scheduling & processing
- add prototype for void usbh_isr(pipe_handle_t pipe_hdl, uint8_t class_code);
2013-03-10 17:51:53 +07:00
8457585464
add class code to hcd_pipe_open to facilitate usb_complete callback
2013-03-09 21:37:49 +07:00
96c92afb32
rename init_qtd, init_qhd
2013-03-09 15:43:14 +07:00
b833203528
house keeping
2013-03-09 14:38:35 +07:00
ef9eb1f2fa
- fix wrong class code for TUSB_CLASS_APPLICATION_SPECIFIC
2013-03-09 14:31:37 +07:00
2364b09f80
add int_on_complete parameter to hcd_pipe_xfer for TD chain class request
...
fix control transfer request: remove get_control_request_ptr()
2013-03-09 14:19:40 +07:00
b1db85dedf
- addd p_qtd_list_tail to qhd structure for easy queue TD
...
- move control_request from ehci_data to usbh_device_info_pool
- add test for bulk transfer double (2 consecutive xfers)
- use table (array) structure for class driver, currently included
- refractor extract to function insert_qtd_to_qhd
+ init function
+ install_subtask
--> all class driver function must be declared with WEAK
2013-03-09 13:11:02 +07:00
b146730306
add test code & hcd_pipe_xfer for bulk transfer
...
- test cross 4k boundary test for bulk transfer
rename p_qtd_list to p_qtd_list_head
2013-03-07 19:54:00 +07:00
644f0d3932
make "used" member of ehci_qtd_t into reserved place of buffer[1] (with assert check in hcd init)
2013-03-07 17:59:07 +07:00
1b610cf26f
refractor list_insert
2013-03-07 16:40:01 +07:00
6d30ae1f32
guard check for open iso pipe
2013-03-07 16:10:16 +07:00
66586ffb08
re-layout ehci_data_t to get better memory consumption
2013-03-07 16:06:28 +07:00
ef08654e73
add prototype for hcd_pipe(control)_close
...
- update test code for enum task respectively
2013-03-06 22:41:14 +07:00
5c3bd1f8dc
add code & test for hcd_pipe_open interrupt
...
high and non-highspeed
2013-03-06 22:21:42 +07:00
7557a807a9
basically finish code for control transfer & test code
2013-03-06 16:32:01 +07:00
f38fed3529
pass test for setup TD
2013-03-06 15:39:37 +07:00
685fb97086
rename fields in ehci_qtd_t
2013-03-06 15:08:09 +07:00
959311532e
refractor
...
- rename some field in ehci_qhd/qtd_t
- code test for open pipe
2013-03-06 14:55:02 +07:00
ef1cef5019
refractor ehci_data_t
...
separate tests for pipe open & pipe xfer
2013-03-06 14:25:26 +07:00
97a4a41b82
refractor
...
- remove unnecessary assign next pointer of asyn/period head in hcd_controller_init
2013-03-06 11:24:20 +07:00
c2b9e1ef83
add some code & testcode for hcd_pipe_control_xfer
2013-03-06 03:03:59 +07:00
71fcf20a95
fix error
...
- remove p_qhd->qtd_overlay.halted = 1;
2013-03-06 01:46:01 +07:00
5b401cc517
refractor hcd_open
2013-03-06 00:29:10 +07:00
b3775b631b
add test & code for open bulk transfer to hcd_pipe_open()
2013-03-05 23:08:00 +07:00
c0bbc2aded
refractor tests
2013-03-05 15:23:12 +07:00
3ed29f5f3c
add test & code for hcd_pipe_control_open
2013-03-05 14:26:36 +07:00
2c8596edeb
abstract call chains from hal usb isr
2013-03-04 18:46:02 +07:00
a259be6edf
refractor
...
- remove TUSB_CFG_HOST_CONTROLLER_START_INDEX
2013-03-04 18:01:05 +07:00
e1033b9b3c
replace TUSB_CFG_HOST by MODE_HOST_SUPPORTED
...
move stuffs around
2013-03-04 17:07:14 +07:00
94c004724c
allow configure host/device by controller basic
...
- make changes to adapt
add mcu_capacity.h
2013-03-04 16:21:41 +07:00
656da2992d
add alignof to compilier specific
...
add static_assert support for IAR (built-in support)
2013-03-04 15:01:33 +07:00
d644eaeb5c
add test for hcd/host init
...
- TT control
- usb cmd
complete hcd/host initialization code
2013-03-04 00:46:40 +07:00
74e6b545e1
house keeping
2013-03-03 15:36:53 +07:00
0f7eb8c38d
add test for hcd/host init period list
2013-03-03 15:32:04 +07:00
356c329922
implement hcd_init controller_init
...
- add test for async list
2013-03-03 12:31:18 +07:00
68ff7365c5
rename ehci usb_int usb_sts usb/error field
...
move MCU define to tusb_option.h
2013-03-01 19:32:53 +07:00
795fe7468d
start to add code for hcd_init test
...
change hcd_init signature (omit hostid)
2013-02-28 17:00:51 +07:00
82bd4719ce
continue to strengthen include policy
2013-02-28 15:58:18 +07:00
d6548d0063
strengthen include policy. Only limited headers are allowed to included from a header file. Missing needed to be included in *.c
2013-02-28 15:06:31 +07:00
f56f6b6749
add timeout_timer.h to provide real tick timeout service for blocking control
2013-02-27 20:58:11 +07:00
594fc6771c
make osal_tick_get, osal_tick_tock static inline
2013-02-27 20:13:49 +07:00
0c397c6b8d
house keeping
...
- correct initialization call sequence
- move hcd_init to ehci.c
2013-02-27 18:49:28 +07:00
a6fac7180c
add coded to test ehci alignment and structure layout (included bitfield)
2013-02-27 16:19:40 +07:00
b1d33c7ffc
rename tusbh_device_mount_succeed_cb
...
add set configure and tusbh_device_mount_succeed_cb invocation
refractor get_configure_number_for_device
2013-02-27 12:42:32 +07:00
5eca6d69c3
correct error using local p_interface_desc with subtask invoke (require static)
2013-02-27 02:14:01 +07:00
4023d07df0
add parsing configuration desc & invoke driver install subtask
2013-02-27 01:57:40 +07:00
49da210860
add osal subtask support
...
add usbh_control_xfer_subtask as xfer and wait
fix potential error when update device info & open control pipe for new address
fix build error with hal_****.c
add STATIC_ASSSERT to perform compile time checking with sizeof later
update osal_queue_receive and osal_semaphore_wait for osal_none to support subtask
2013-02-26 17:28:05 +07:00
ac744b0401
refractor use Compound Literal Reference for sending control request in enum task
2013-02-22 17:14:34 +07:00
5bacdc6c0f
updating usbh init with class init
2013-02-08 12:52:46 +07:00
489b98cb93
add TUSB_CFG_HOST_CONTROLLER_START_INDEX
...
update usbh_init and test code for TUSB_CFG_HOST_CONTROLLER_START_INDEX
clean up some
2013-02-08 12:12:10 +07:00
ef0e105da6
rename addr variable to avoid conflict with static variable
2013-02-07 19:42:41 +07:00
89f74d22a7
flatten enum task --> there is quite of code duplication
2013-02-06 18:56:49 +07:00
e6ed1729b2
update enumeration up to get full configuration descriptor
2013-02-06 18:12:26 +07:00
060c4b3b30
refractor move device_addr0 into usbh_device_pool
...
enum_entry contains speed and enum task will not carry out disconnection clean up
2013-02-06 16:52:18 +07:00
7961f04e17
remove hcd_addr0_close_Ignore
...
add code to check error handling from enum task
2013-02-06 13:50:17 +07:00
a253e4d648
fix TASK_ASSERT for osal_none.h
...
add TASK_ASSERT test for osal_none
integrate test project better with eclipse
- assert message--> info windows
- test fail --> error windows
2013-02-06 13:15:12 +07:00
e20025b54d
refractor move test enum to its own file
...
add assert with handler
add task assert with error catcher
2013-02-06 12:03:01 +07:00
aeccdfde3f
remove TUSB prefix for class enum definitions
...
add most of HID USAGE TABLE and definitions etc ...
2013-02-05 13:57:06 +07:00
aa040c4c98
rename device_info_pool to usbh_device_info_pool
...
update enum task to post set address
2013-02-04 21:52:50 +07:00
93269b0343
fix osal_semaphore_wait & osal_queue_receive of osal_none's bug
...
- not assign error to TUSB_ERROR_NON if succeed
add code up to set device address for enumeration
2013-02-04 20:54:52 +07:00
5e8d70a184
complete define osal_freeRTOS for semaphore and queue
2013-02-04 18:05:22 +07:00
dd9da7846a
port osal_FreeRTOS, add some include to be able to mock & link
...
change osal_none's queue_t member from uint16_t to uint8_t
2013-02-04 17:13:26 +07:00
d71e244dff
add TUSB_CFG_HOST_ENUM_BUFFER_SIZE
...
add enum buffer
getting serious with osal_freeRTOS
2013-02-04 16:07:42 +07:00
0a13e37ba2
resolve conflict between usbh & hcd
2013-02-04 14:48:35 +07:00
hathach