1cb53dd23e
Merge pull request #438 from UweBonnes/debug
...
examples/readme.md: Add hint to build for debug
2020-06-22 11:11:00 +07:00
d96fa8d407
examples/readme.md: Add hint to build for debug.
2020-06-21 14:33:47 +02:00
bd41504f65
Merge pull request #433 from HiFiPhile/sof
...
Disable SOF in dcd_stm32_fsdev
2020-06-20 17:33:58 +07:00
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
2b27eed01a
Merge pull request #431 from HiFiPhile/unaligned
...
Fix IAR compiler warnings.
2020-06-17 17:24:40 +07:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
2b1c7730b7
fix hs port1 build with net endpoint
2020-06-16 00:53:06 +07:00
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
c67b3a242e
update example config and descriptor with better Highspeed support
2020-06-15 23:34:09 +07:00
2dd1be13e5
Enhance EP FIFO allocation for both Fullspeed and Highspeed
...
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
- Interrupt -> use EPSize
- Bulk/ISO -> use max(EPSize, remaining-fifo / non-opened-EPIN)
2020-06-15 23:17:49 +07:00
e89fea8237
update midi
2020-06-15 23:09:43 +07:00
0bfa839ac0
clean up, update other example config
2020-06-15 23:06:17 +07:00
8a67f81397
Merge pull request #430 from PanRe/fix-too-strict-iad-checks
...
Fix too strict checks on subclass and protocol entries of iad descriptor.
2020-06-14 19:31:32 +07:00
bc7e24b659
Fix wrong comment for IAD checks.
2020-06-14 14:22:10 +02:00
4399dd1b06
cherry pick PR399 commit : Interrupt time improvements
2020-06-14 19:13:31 +07:00
f438aedccb
overwrite setup packet
2020-06-14 18:29:38 +07:00
95966c2201
improve usbd log for control transfer
2020-06-14 18:29:02 +07:00
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
b25bbf4776
Fix alignment.
2020-06-14 12:58:16 +02:00
3012175351
Fix alignment.
2020-06-14 12:57:00 +02:00
48b2e6cf78
Fix too strict checks on subclass and interface of iad descriptor.
2020-06-13 13:51:50 +02:00
0635bafe0a
Add DCD for Dialog DA1469x MCU
...
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.
This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
2020-06-09 15:55:46 +02:00
56f3898ced
Add Dialog DA1469x register definition file
...
Register definition file along with some MCU headers was taken
from Dialog SDK for DA1469x MCUs.
Those files are needed for USB port.
2020-06-09 12:55:28 +02:00
d9496256cf
Update feature_request.md
2020-06-01 15:17:45 +07:00
5a1c86d948
Update bug_report.md
2020-06-01 15:17:05 +07:00
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
710c54f8cb
allow hs ep open with 512 bytes
2020-06-01 01:36:09 +07:00
f771afe6af
fixed EP0 size to 64 since LS is not supported in device mode
...
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
2020-05-31 23:43:29 +07:00
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
5efeaf2ac1
Merge pull request #413 from kasjer/kasjer/ble-over-usb
...
Bluetooth HCI transport over USB
2020-05-31 15:07:56 +07:00
7258355e8e
Merge pull request #424 from hathach/fix-idf-usb-pin-init
...
fix idf usb pin init changes
2020-05-29 14:07:37 +07:00
e0490ae786
fix idf usb pin init changes
2020-05-29 13:06:33 +07:00
e9b41cb97d
Merge pull request #421 from hathach/add-qualifier-descriptor
...
add get device qualifier descriptor
2020-05-28 23:34:42 +07:00
d6d29897f3
add get device qualifier descriptor
2020-05-28 23:16:16 +07:00
56d46483e4
Add bt hci device class
...
Code implements USB transport for bluetooth HCI.
2020-05-28 10:58:49 +02:00
077437b3dc
Add non standard request handling in class
...
For some reason bluetooth stack implementations send class requests
to device instead of interface.
To implement HCI interface over USB non device addressed requests
for class need to be handled.
2020-05-28 10:11:37 +02:00
b8783e10a9
Merge pull request #418 from hathach/enhance-usbd-driver-open
...
Enhance usbd driver open() API
2020-05-28 15:04:15 +07:00
53b749fd72
check max_len for vendor and hid
2020-05-28 14:44:26 +07:00
fb214f7cf7
rename to drv_len to be consistent
2020-05-28 13:57:49 +07:00
10cd3f24bf
initial transfer failed in open() shouldn't cause the driver open to fail.
2020-05-28 13:48:02 +07:00
c1db36a15c
update vendor open()
2020-05-28 12:19:06 +07:00
bec5b5f9da
update usbtmc open()
2020-05-28 12:13:48 +07:00
13860e9f94
update net open()
2020-05-28 11:51:25 +07:00
8f560bf275
update midi open()
2020-05-28 11:41:37 +07:00
89a3d1f6d1
update hid open()
2020-05-28 11:19:12 +07:00
7a15d2e0d2
improve msc
2020-05-28 00:56:33 +07:00
2eeeda1bcf
change signature for dfu runtime
2020-05-28 00:46:32 +07:00
e340404968
changing usbd driver open() return type, add max_len
...
only done with cdc and msc, push this interim for feedback first
2020-05-27 19:01:59 +07:00
d4bf777c94
try to get synopsys work with OTG HS + external PHY
2020-05-27 11:01:33 +07:00
Ha Thach