kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,618 Commits 2 Branches 4 Tags 34 MiB
Commit Graph

764 Commits

Author SHA1 Message Date
Peter Lawrence 5c5f876461 dcd_nuc121: allow user ZLP transfers to get a callback 2020-01-04 13:36:26 -06:00
Peter Lawrence f4371e79b1 add Nuvoton NUC121/NUC125/NUC126 2020-01-04 10:31:55 -06:00
samveen ba8a232970 add "`" and "~" to keycode -> ASCII table 2019-12-17 12:47:05 +05:30
samveen fdce63b268 [tusb]fix typo in comment 2019-12-16 23:01:26 +05:30
Ha Thach 7a05b177a4
Merge pull request #236 from jeremyherbert/master 
Update dcd_stm32_fsdev.c with note about F042Fx remapping
 2019-12-12 10:17:40 +07:00
Jeremy Herbert 9d96b6d66e
Update dcd_stm32_fsdev.c 
Add a note about pin remapping for the STM32F042Fx
 2019-12-12 09:40:06 +10:00
hathach 96a9eca6a0 move VBUS sense out of dcd_synosys to bsp 2019-12-11 14:03:36 +07:00
Jerzy Kasenberg 4a1f7d0243 Fix mynewt osal queue definition 
Queue table has pointers instead of data os_event structs.
This resulted in crashes when elements were put to queue and
overwritten variables that were just after mpool desiged
for queue.
 2019-12-01 12:38:36 +01:00
Sean Cross 26dcc19b18 valentyusb: eptri: don't double-advance read buffer 
Due to an error, we were double-advancing the FIFO buffer.  The end
result was that the second half of most reads were getting ignored.

This wasn't found during earlier testing because only 64-byte buffers
were tested.

This corrects this error by avoiding double-advancing the buffer.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-29 18:14:23 +08:00
hathach fe1eadf177 fix #229 2019-11-27 12:34:30 +07:00
hathach 8a1b6327ba extract code to invoke_class_control() 
- also rename usbd_class_drivers to _usbd_driver
 2019-11-27 12:12:52 +07:00
hathach d991466a8e fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2 2019-11-23 00:48:56 +07:00
hathach 38b14725f7 rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX 2019-11-22 17:40:12 +07:00
hathach 281e8cd9ec rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX 2019-11-22 15:42:46 +07:00
Ha Thach ca741dfc2a
Merge pull request #220 from hathach/develop 
Port NXP iMX RT10XX
 2019-11-22 15:16:41 +07:00
hathach 6123b600fc rename dcd_lpc18_43 to dcd_transdimension 2019-11-22 14:47:07 +07:00
hathach a0b2561a2d move nxp dcd ehci controller reset and modde into dcd 
rt1064 work with cdc msc example
 2019-11-22 14:20:10 +07:00
hathach fca4653b95 able to compile dcd 18/43 with rt1064 2019-11-22 12:34:41 +07:00
hathach 2ead26a12d more clean up 2019-11-22 12:26:40 +07:00
hathach ccb09db3b7 more clean up 2019-11-22 12:16:47 +07:00
hathach 7e16a9a1db more constant rename clean up 2019-11-22 12:14:55 +07:00
hathach 8aacd1eacd refactor dcd_lpc18_43, making it capatible with rt10xx 2019-11-22 12:11:13 +07:00
hathach 623b16af2e clean up dcd lpc18_43 
drop supporting both device mode on both ports.
 2019-11-22 00:58:18 +07:00
hathach 1f52273d99 move dcd_lpc18_43.h into .c file 2019-11-22 00:38:22 +07:00
hathach 03deeea465 fix segger host example 2019-11-22 00:33:10 +07:00
hathach f5d737aa7e moving irq to bsp for lpc17/40 2019-11-21 23:19:38 +07:00
hathach bbec47b647 adding tud_isr/tuh_isr with lpc18/43 2019-11-21 22:20:30 +07:00
hathach 043697ab95 rename lpc 17/18 irq to dcd_isr/hcd_isr 2019-11-21 16:08:08 +07:00
Sean Cross a9282eab51 eptri: clear proper endpoint when opening IN port 
When opening a USB port, we ensure the buffer is NULL and has
a length of 0.

Due to a mistake in specifying the endpoint type, we never actually
cleared the value when opening an IN endpoint.  This patch fixes
the comparison when opening an IN endpoint.

This fixes issue #218.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-20 17:45:21 +08:00
hathach 1aa3f085cb adding support for NXP rt1064 evk board, boad test led + sw8 work. 
LTO is temporary disabled
 2019-11-20 15:30:39 +07:00
hathach c2fb813658
Merge pull request #217 from xobs/valentyusb-eptri 
WIP: Add Valentyusb eptri
 2019-11-18 12:37:34 +07:00
hathach 56abce44f3
Merge pull request #208 from hathach/fix-issue-207 
Fix issue 207
 2019-11-14 10:10:42 +07:00
Sean Cross cc73990530 tusb: rename `foosn` to `valentyusb` 
Use the name `valentyusb` as the vendor for the `valentyusb`
project, rather than the manufacturer name of the Fomu device.

This is because the `valentyusb` core can be used across multiple
vendors, much like how other cores can be used across chip vendors.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:47 -08:00
Sean Cross 8c5f02960b valentyusb: rename from `foosn` 
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`.  Rename the module to match that.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:47 -08:00
Sean Cross e05e9801e4 fomu: gate debug/logging features 
This gates the majority of the debug and logging features behind
testable macros.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:47 -08:00
Sean Cross 3292920933 fomu: first stable working commit 
This appears to be stable, and works well.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:47 -08:00
Sean Cross 1882a87212 fomu: remove reference to SETUP_CTRL.ACK 
THis bit isn't used anymore, so remove it.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:47 -08:00
Sean Cross 729c8d073c fomu: dcd_fomu: add next_ev support 
Now that we have the `USB_NEXT_EV` register, take advantage of
it to work around issue #207.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:09:38 -08:00
Sean Cross 913032ae1d dcd_fomu: nearly there 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 835a72c595 fomu: semi-working dcd file 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 843136d0e4 fomu: commit latest version 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 22fd7bf85e fomu: first fully-working release 
This is able to transfer lots of data back and forth across MSC.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 4a8475b8a7 src: add eptri to tusb 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 0559fd13fb fomu: fix some issues with dcd_fomu 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 359189ea2d tusb_verify: add riscv assert support 
This simply executes an "ebreak" instruction.

Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:08:01 -08:00
Sean Cross 32bb68409e portable: fomu: get msc to enumerate 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:03:12 -08:00
Sean Cross 36ede44885 fomu: wip support 
Signed-off-by: Sean Cross <sean@xobs.io>
 2019-11-13 09:03:12 -08:00
hathach 4008f0d1e6 update dcd nrf5x to be indepent from nrf_usbd.h 
fix build error with nrfx 2.0
 2019-11-11 00:01:12 +07:00
hathach fc86a308f6 clean up 2019-11-05 11:45:02 +07:00
hathach 5209091c28
Merge branch 'master' into fix-issue-207 2019-11-05 10:20:30 +07:00