a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
4ef3946a25
adding lpcxpresso11u37 board
2019-09-06 15:06:04 +07:00
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
6e6f470b58
board clean up, add button for ea4088
2019-05-15 17:15:02 +07:00
9863230a8d
update button for mcb1800
2019-05-15 16:17:46 +07:00
2d58f3118e
mcb1800 build and blinky with makefile
2019-05-15 16:09:44 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
5f3ab2afe1
rename board_led_control to board_led_write
2019-04-02 18:16:04 +07:00
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
29e075b8b9
clean up bsp, adde board_millis()
2019-03-23 22:31:07 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
20fb416783
clean board uart read & write
2019-03-20 20:58:27 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
d7c0f0aab5
clean up mcb1800
2018-12-04 13:32:59 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach