4e789b240d
Start of sampling works.
2020-09-06 11:37:59 +02:00
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
19f08a02f6
Merge pull request #486 from kasjer/kasjer/add-endpoint-close-to-synopsys
...
Add dcd_edpt_close() to synopsys
2020-08-24 13:10:46 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
37be0ca732
Fix formatting, get rid of all tabs.
2020-08-20 20:09:44 +02:00
c14f68e2c1
Commit before sharing.
...
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
6309364722
Merge remote-tracking branch 'upstream/master' into uac2
...
Conflicts:
src/device/usbd.c
src/device/usbd.h
src/portable/st/synopsys/dcd_synopsys.c
2020-08-16 14:08:24 +02:00
444e4d2821
Add EP close. Fix bug in set_interface within audio.
2020-08-16 13:48:25 +02:00
e8d50a3c57
Add dcd_edpt_close() to synopsys
...
Endpoint close was implemented only in one driver so far.
This function is needed for interfaces with several alternate settings.
The way FIFO is allocated in dcd_edpt_open() allows to correctly close
only one IN endpoint (the one that was opened last).
2020-08-14 14:29:35 +02:00
88c5e2a37f
Fix synopsys fifo flush during stall
...
Wrong FIFO was flushed in dcd_edpt_stall().
(epnum - 1) should only be used when accessing DIEPTXF registers.
For DIEPCTL and GRSTCTL epnum is correct index.
2020-08-12 10:26:36 +02:00
6f3378f71d
Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit
...
Fix synopsys odd/even frame bit for IN ISO endpoints
2020-08-05 22:36:05 +07:00
e9aa36a6e8
Fix synopsys odd/even frame bit for IN ISO endpoints
...
For ISO endpoint driver has to specify when data
is to be transmitted (odd or even frame).
Currently code was not updating this bit resulting in
data being sent every other frame.
If interval was 1ms full data packed was sent every 2ms, and
ZLP was sent in between.
2020-08-04 09:32:41 +02:00
7d9efd0697
manually submit unplugged event for nrf dcd_disconnect()
2020-08-04 14:18:12 +07:00
026a1e7ac8
Merge pull request #478 from hathach/move-dcdconnect-to-dcdinit
...
Move pull-up enabling to dcd_init() instead of usbd
2020-08-04 14:11:32 +07:00
c557bf7b2e
Implement dynamic FIFO RAM allocation according to configuration desc.
2020-08-03 19:48:05 +02:00
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning
...
fix msp430 gcc 9.2.0 warning
2020-08-02 12:53:03 +07:00
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event
...
correct isr context for nrf DCD_EVENT_UNPLUGGED
2020-08-01 12:31:48 +07:00
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
...
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
c3b0389f10
Fix synopsys size check for ISO endpoint
...
Constraint was incorrect for ISO endpoint as stated in TODO.
2020-07-31 15:52:21 +02:00
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs]
2020-07-29 17:04:47 +07:00
5af08e2ffc
fix strict prototype
2020-07-29 16:59:07 +07:00
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos
...
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
2020-07-28 15:16:15 +07:00
a1a390a788
Update dcd_esp32s2.c
2020-07-28 10:54:23 +03:00
6976e64217
fix msp430 gcc 9.2.0 warning in #465
2020-07-28 14:36:15 +07:00
01903a4a6d
Implement dynamic reallocation of RX and TX fifos for EP0.
...
Tested with EP0 size 8/16/32/64.
2020-07-27 21:03:20 +02:00
5e3f90cd6e
add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset
2020-07-26 19:21:30 +02:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
7baeea7a00
update actual link speed for spresense
2020-07-17 18:28:19 +07:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
6178f8de2f
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
...
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
2020-07-01 13:38:59 +03:00
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
2dd1be13e5
Enhance EP FIFO allocation for both Fullspeed and Highspeed
...
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
- Interrupt -> use EPSize
- Bulk/ISO -> use max(EPSize, remaining-fifo / non-opened-EPIN)
2020-06-15 23:17:49 +07:00
4399dd1b06
cherry pick PR399 commit : Interrupt time improvements
2020-06-14 19:13:31 +07:00
f438aedccb
overwrite setup packet
2020-06-14 18:29:38 +07:00
0635bafe0a
Add DCD for Dialog DA1469x MCU
...
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.
This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
2020-06-09 15:55:46 +02:00
710c54f8cb
allow hs ep open with 512 bytes
2020-06-01 01:36:09 +07:00
f771afe6af
fixed EP0 size to 64 since LS is not supported in device mode
...
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
2020-05-31 23:43:29 +07:00
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
d4bf777c94
try to get synopsys work with OTG HS + external PHY
2020-05-27 11:01:33 +07:00
b4804d1592
random clean up for tdi
2020-05-26 22:15:38 +07:00
947c3eb10d
multiple port support for global otg base
2020-05-26 16:07:48 +07:00
b7ab60aa44
suporting multiple port (OTG FS + HS) for stm32
2020-05-26 15:52:02 +07:00
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
42edbc0006
Allow EP0 to use xfer sizes larger than one packet
2020-05-15 22:26:14 +02:00
28696de390
Interrupt time improvements
2020-05-15 18:21:44 +02:00
3401e0f6ff
Synopsys OUT EP improvements:
...
- Use register based XFRSIZ to determine transfer complete
(xfer->queued_len and xfer->short_packet were deleted)
- Pop out as many RxFIFO data entries as available within a IRQ call
- less application interruption due to XFRC calls
2020-05-08 18:10:48 +02:00
58b99e59d4
detect if SD is actually present on the flash using SD magic
...
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
2020-05-05 23:07:56 +07:00
101f234a16
Merge pull request #387 from duempel/redesign_transmit_synopsys
...
Redesign of Synopsys device transmission
2020-05-04 14:41:20 +07:00
fd69cc3dcc
clean up
...
renaming function and variables
changing indent size
2020-05-04 07:59:13 +02:00
0e30afa691
abstract all UDP_CSR
2020-05-02 18:24:23 +07:00
3ad0cd041b
clean up
2020-05-02 16:29:22 +07:00
ac3c645dc1
fix EP0 data toggle issue
2020-05-02 16:09:28 +07:00
2a479175ae
remove toggle walkaround, fix control stall race condition
2020-05-02 14:51:21 +07:00
a74a823b0a
fix dcd samd race condition with setup packet
...
setup packet can complete together with previous status (in & out).
Always make sure to prepare valid buffer for holding setup packet when
queuing control status.
2020-04-30 00:29:47 +07:00
59ff208c65
Changed switch into if statements
2020-04-29 12:37:29 +02:00
3e6feb7f6d
Redesign of Synopsys device transmission
...
Changes:
- checking if tx buffer empty interrupt is masked
- process more than one packet in isr
- mask tx buffer empty just after all bytes were written
- use of transmit_fifo_packet instead of transmit_packet
2020-04-29 11:32:22 +02:00
958b5510cb
added comment for hw clearing TXFE
2020-04-27 13:17:47 +07:00
e785b09118
TXFE is read only bit
2020-04-27 12:06:14 +07:00
00fcf829a1
sync synopsis fix for esp32s2
2020-04-26 22:41:04 +07:00
8d18d6077b
turn off TX FIFO Empty for EPIN if all bytes are written
...
fix dcd synopsys issue with usbnet #289
2020-04-26 22:14:59 +07:00
b949ae596f
synopsys: Reduce interrupt time for IN ZLP
...
For IN endpoints output FIFO is filled in interrupt, therefor before
endpoint is enabled, DIEPTSIZ is set with correct size of packet.
Then endpoint is enabled and FIFO empty interrupt is enabled.
This works fine except for the ZLP. Enabling FIFO empty interrupt
results in interrupt handler being called all the time because
there is nothing to put in the FIFO.
Eventually it ends when IN token is received and empty
packed is transmitted out.
This change does not enable FIFO empty interrupt for ZLP reducing
CPU load.
2020-04-24 17:38:30 +02:00
551724498a
Added support for STM32F1 Connectivity Line MCU
...
STM32F105 and STM32F107 are using the Synopsys IP
2020-04-22 17:39:53 +02:00
1f442c0a9a
also add wakeup event
2020-04-18 23:48:36 +07:00
c3fc5f1595
session end interrupt doesn't trigger on esp32 saola board
...
it is possibly due to the board design without vbus sense. Revisit
later.
2020-04-18 23:42:51 +07:00
fa71402e17
implement disconnection detection for stm32 synopsys
...
- disconnection is OTG INT session end bit
- add USE_SOF to disable 1ms interrupt on mcu which isn't used now by
the stack
- add suspend detection
2020-04-18 23:40:27 +07:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
Reinhard Panhuber