126e46e38a
Fix not increment xfer->buffer if xfer->buffer == NULL in dcd_samg.c
2021-02-13 17:37:13 +01:00
7ab389db21
Implement dcd_edpt_iso_xfer() for dcd_samg.c. NOTE: ISO EP not supported
2021-02-13 16:36:32 +01:00
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
3e1d85eed2
comment clean up
2021-01-08 11:43:26 +07:00
cc5dfd03cd
update comment and correct the size to 8+2
2021-01-08 11:21:26 +07:00
60620dca42
walkround for samd21 setup_packet overflow
...
increase setup packet size from 8 to 12, since USB DMA controller is
suspected to overflow the buffer with 2 extra bytes
2021-01-08 01:21:03 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
0e30afa691
abstract all UDP_CSR
2020-05-02 18:24:23 +07:00
3ad0cd041b
clean up
2020-05-02 16:29:22 +07:00
ac3c645dc1
fix EP0 data toggle issue
2020-05-02 16:09:28 +07:00
2a479175ae
remove toggle walkaround, fix control stall race condition
2020-05-02 14:51:21 +07:00
a74a823b0a
fix dcd samd race condition with setup packet
...
setup packet can complete together with previous status (in & out).
Always make sure to prepare valid buffer for holding setup packet when
queuing control status.
2020-04-30 00:29:47 +07:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
36d4efa077
samg implement dcd connect/disconnect
2020-04-16 22:59:19 +07:00
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
421221baa5
making more progress, but failed with WRITE10
...
incorrect queue 448 bytes instead of 512
2019-12-21 23:51:57 +07:00
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
f16ebd512b
indent clean up
2019-07-04 18:45:10 +07:00
73d7ab201e
remove dcd_edpt_busy()
2019-06-10 22:29:18 +07:00
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
667133304b
fix samd dcd_clear_stall also reset data toggle
2019-05-10 00:10:18 +07:00
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
bd53256126
fix #32
2019-01-23 19:06:37 +07:00
6f17b4e019
change to dcd_get_frame_number
2018-12-21 12:46:20 +07:00
426064201a
fix samd build
2018-12-19 13:16:42 +07:00
902697ca07
add dcd_get_microframe()
2018-12-17 12:14:11 +07:00
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
6048a3bff4
remove dcd_connect/disconnect since there is no usage now
2018-12-05 12:22:33 +07:00
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
bf70f89240
Introduce a Makefile for the OS_NONE device example
...
It currently supports the SAMD21 and SAMD51 only. More will be
added later.
2018-11-25 11:46:06 -08:00
bf8c4612dc
Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store
...
a SETUP token into.
2018-11-23 11:20:23 -08:00
6aa0146c72
Reset USB peripheral and wait for startup
2018-11-23 11:15:39 -08:00
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
1d6fc49fa9
clean up
2018-11-21 17:03:39 +07:00
3cad1d1134
samd21 work well with cdc
2018-11-21 15:00:36 +07:00
a30dfa3324
clean up
2018-11-21 13:11:19 +07:00
a0ce92bcfd
update dcd samd21
2018-11-21 13:01:39 +07:00
155edc7b00
fix ses irq vector
2018-11-21 12:36:28 +07:00
d036f62b0e
samd51 fix stable issue with dcd
2018-11-20 17:25:41 +07:00
c503d48ec4
clean up
2018-11-20 01:20:39 +07:00
5732be224c
update example for PR. correct share_control definition
...
- rename dcd,hal to dcd_samd51, hal_samd51 since some IDE has issue with
duplicated names (e.g keil, ses).
2018-11-14 16:03:58 +07:00
537a29273c
Exempt from strict warnings for struct packing and add MCU options
2018-11-09 00:10:44 -08:00
c582c0fda9
Add SAMD21 and SAMD51 support for CircuitPython.
...
The ProtoThreads style subtasks were removed because it led to
extremely unclear control flow. RTOSes can be used if threading is
needed.
Also added some additional functionality to MSC to support dynamic
LUNs and read-only LUNs.
2018-11-07 12:02:28 -08:00
Reinhard Panhuber