6f3d0af1e6
synopsys: Fix fifo allocation schema
...
Recommended FIFO allocation schema includes 2 maximum endpoint sizes.
Comment suggested that this is the case while it would work according
to this description only in checked endpoints were ascending sizes.
Also two same size endpoints would be counted as one.
That is fixed by way sz is filled.
Calculation used too much modulo operation while single division was enough
to account for odd FIFO sizes.
Extra space that is evenly distributed between Bulk and control endpoints
was incorrectly calculated it could prevent allocation of ISO endpoint FIFO
when bulk endpoints existed with smaller endpoint numbers.
Minimum endpoint FIFO size is 16 32bit words, FIFO space requirement is
now observed.
2020-09-28 08:41:17 +02:00
8dcb104933
Change modulo substitute to while ( idx >= depth) idx -= depth;
2020-09-26 11:00:31 +02:00
9ddcfc09d7
Fix wrong comments, rename pos to offset, rename overflow().
2020-09-25 15:58:28 +02:00
52c9a467b4
Fix bug in modulo substitute.
2020-09-23 21:36:30 +02:00
9bdeafb295
Change maximum depth to 2^15 which allows for a fast modulo substitute.
...
Thus, however, overflows are detectable only for one time FIFO depth.
2020-09-23 20:48:03 +02:00
8b2c822557
Merge pull request #512 from mzero/fix-midi-sysex
...
Fix a bug in writing SysEx messages.
2020-09-23 11:23:53 +07:00
21299f90fa
Final cleanup.
2020-09-19 11:46:43 +02:00
9dfb78e9d8
Tested, working.
2020-09-15 20:40:41 +02:00
62a76c0e04
nrf52: Fix edpt_dma_start() wrong condition check
...
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.
This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
745c15d5b5
Merge pull request #508 from hathach/fix-edpt-race
...
Fix edpt xfer race condition
2020-09-14 23:56:21 +07:00
349c0f640e
Implementation done, yet to be tested.
2020-09-14 18:24:08 +02:00
9c0d15fc43
more const
2020-09-14 22:23:59 +07:00
23e6ee2ea2
cdc device: claim endpoint before checking fifo availability
...
- add pre-check to reduce mutex lock in usbd_edpt_claim
2020-09-14 22:14:31 +07:00
3b0216d3bf
Update midi_device.c
...
Fix a bug in writing SysEx messages.
At the start of a new USB packet (4 bytes), while in the middle of a SysEx, the code mistakenly
set the buffer length to 4, not the target length. As a consequence, the 3rd and 4th bytes from
the last packet were included, after every byte of the SysEx after the first packet of three.
The fix is simple, as it was just a typo, as can bee seen from the other branches in the same
section of if/else statements: At the start of a new packet, the code should set up the target
length... the buffer length should be left at 2 (as set on line 180).
2020-09-13 15:05:18 -07:00
5931d19666
correct the TUD_HID_REPORT_DESC_GAMEPAD
2020-09-13 15:01:20 +07:00
1804dba615
typo
2020-09-12 08:48:49 +07:00
ce4a9b9c3a
clean up
2020-09-11 00:14:07 +07:00
801f8b5b38
update claim edpt for hid and midi
2020-09-10 23:32:08 +07:00
b15c209805
Set new define because of build failure
2020-09-10 13:36:07 +02:00
ed6d48b81e
typo
2020-09-09 16:45:54 +07:00
fe1b5dfa23
clean up
2020-09-09 16:29:45 +07:00
33f0a18523
update cdc edpt read
2020-09-09 16:25:31 +07:00
8b9893cada
introduce optional usbd_edpt_claim, usbd_edpt_release which can be used to gain exclusive access to usbd_edpt_xfer
2020-09-09 15:48:11 +07:00
2b54dcb9f6
move functions around
2020-09-07 15:39:46 +07:00
7a3b24827e
clean up
2020-09-07 15:25:03 +07:00
66a10ec9c8
rework usbh control transfer
...
use series of complete callback instead of blocking semaphore, which is
more noOS friendly. still working with hid host
2020-09-07 15:19:20 +07:00
4e789b240d
Start of sampling works.
2020-09-06 11:37:59 +02:00
b3e81673c0
change xfer_cb return type from void to bool
2020-09-06 12:11:07 +07:00
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
9a6d7c648e
clean up enum task
2020-09-05 21:12:43 +07:00
828f720207
refactor hub class
...
- separate connect/disconnect handling
- hub work with full speed, but doesn't seem to work with Low speed
device (with mcb1800)
- need to update msc host after migrating from isr to xfer_cb (blocked
at inquiry)
2020-09-05 20:20:45 +07:00
7ffb6acc16
more clean up
2020-09-05 17:16:46 +07:00
b8b95e8494
add in_isr to all hcd event functions
2020-09-05 15:46:50 +07:00
90c8c14652
clean up
2020-09-05 15:19:01 +07:00
bc09b6065f
refactor extract parse_configuration_descriptor()
2020-09-05 15:16:45 +07:00
d87f2a9691
remove usbh control mutex
2020-09-05 15:05:25 +07:00
9531e47d10
update example to test with mouse
2020-09-05 14:59:07 +07:00
f7cf8cdf27
defer xfer_isr to xfer_cb
2020-09-05 14:41:31 +07:00
4d57b4ea33
clean up
2020-09-05 13:57:07 +07:00
12562fc966
Merge remote-tracking branch 'upstream/master' into uac2
2020-09-04 16:23:39 +02:00
9cc22b635c
Add functionality to abort an ongoing transfer
2020-09-04 15:40:23 +02:00
a8e538efe7
clean up
2020-09-04 01:35:32 +07:00
35aee4a6af
more hid host work
2020-09-03 23:57:51 +07:00
338e96fa82
Remove tud_audio_n_write_ep_in_buffer() as long as ISO EPs are not RBs.
2020-09-03 18:09:46 +02:00
4071e490e2
New function to modify fifo overwritability
2020-09-03 17:21:32 +02:00
fd6cf9010b
Turn transmit fifo overwritable in no DTR mode
2020-09-03 17:03:13 +02:00
d9eaa54e14
Remove connected check for write flushing
2020-09-03 16:40:53 +02:00
ef651e0734
fix #449 remove obsolete pipehandle from hid host
2020-09-03 17:07:29 +07:00
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
8f0693346c
Allow epin_buf to be written directly into in case no TX FIFOs are used.
...
This is helpful if you have already encoded audio data and want an
efficient way to send it. However, this approach is NOT THREADSAFE so
far and works realiably ONLY IF tud_audio_n_write_ep_in_buffer() is NOT
called form an interrupt!
2020-09-01 11:26:16 +02:00
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
83bd214203
Fix comment.
2020-08-29 13:26:41 +02:00
43c4b53635
Fix CFG_TUD_AUDIO_RX_FIFO_SIZE defines.
2020-08-29 13:24:10 +02:00
b9c9cfdbac
Change min to tu_min16.
2020-08-29 13:22:21 +02:00
b1f0d6f57e
audio_device: Change CFG_TUD_AUDIO_TX_BUFSIZE to CFG_TUD_AUDIO_TX_FIFO_SIZE
...
CFG_TUD_AUDIO_TX_BUFSIZE seems to be used only in 3 preprocessor
condition while in other places CFG_TUD_AUDIO_TX_FIFO_SIZE is used.
2020-08-25 14:45:40 +02:00
a3eff0c51a
audio_device: Fix NULL pointer access in audiod_xfer_cb
...
b_bytes_copied was pointer with NULL value instead of
plain variable.
NULL pointer was passed to audio_tx_done_cb() and dereference
as well.
Now variable is not a pointer.
2020-08-25 14:35:05 +02:00
a4c096be37
audio_device: Fix FIFO element size discrepancies
...
Buffer for TX and RX FIFO was not taking into account
size of element leading to out of bound access.
audio_tx_done_type_I_pcm_ff_cb() reported copied bytes was not returning
correct value number if channels was omitted in computation.
Transfer size calculation uses simpler arithmetic.
2020-08-25 14:35:05 +02:00
2d8787cdeb
fix typo
2020-08-24 15:29:34 +07:00
a1b7e767af
improve midi
...
- fix #436 tud_midi_rx_cb() not invoked
- fix xfer_cb() not handle ep in
- add ZLP if needed
2020-08-24 14:31:46 +07:00
c61e9fb96d
audio_device: Fix descriptor limit calculation
...
In several place p_desc_end calculation was not taking into account
that starting pointer (_audiod_itf[idxDriver].p_desc) was pointing
past interface association descriptor.
It would result in accessing random memory.
2020-08-24 09:04:42 +02:00
19f08a02f6
Merge pull request #486 from kasjer/kasjer/add-endpoint-close-to-synopsys
...
Add dcd_edpt_close() to synopsys
2020-08-24 13:10:46 +07:00
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
e5d622b749
Merge pull request #434 from gh2o/master
...
Add TX callback to CDC device
2020-08-21 11:14:06 +07:00
37be0ca732
Fix formatting, get rid of all tabs.
2020-08-20 20:09:44 +02:00
72183c7bb4
Slight optimization for cdc tx refill
2020-08-20 09:59:23 -07:00
15b063beb2
Smarter CDC TX refill logic
2020-08-20 02:20:01 -07:00
c14f68e2c1
Commit before sharing.
...
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
6309364722
Merge remote-tracking branch 'upstream/master' into uac2
...
Conflicts:
src/device/usbd.c
src/device/usbd.h
src/portable/st/synopsys/dcd_synopsys.c
2020-08-16 14:08:24 +02:00
444e4d2821
Add EP close. Fix bug in set_interface within audio.
2020-08-16 13:48:25 +02:00
e8d50a3c57
Add dcd_edpt_close() to synopsys
...
Endpoint close was implemented only in one driver so far.
This function is needed for interfaces with several alternate settings.
The way FIFO is allocated in dcd_edpt_open() allows to correctly close
only one IN endpoint (the one that was opened last).
2020-08-14 14:29:35 +02:00
88c5e2a37f
Fix synopsys fifo flush during stall
...
Wrong FIFO was flushed in dcd_edpt_stall().
(epnum - 1) should only be used when accessing DIEPTXF registers.
For DIEPCTL and GRSTCTL epnum is correct index.
2020-08-12 10:26:36 +02:00
61e96e97cb
use usbd_edpt_open in bth driver
2020-08-11 22:09:16 +07:00
a9d362185b
update note for app driver list mustbe accesible at all time.
2020-08-07 15:06:19 +07:00
01b9b77d3b
allow application driver to overwrite built-in one
...
- position application driver before built-in
- remove dcd.h from public include.
2020-08-07 14:47:32 +07:00
9df8057702
Merge branch 'master' into add-app-driver
2020-08-07 12:13:13 +07:00
6f3378f71d
Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit
...
Fix synopsys odd/even frame bit for IN ISO endpoints
2020-08-05 22:36:05 +07:00
e9aa36a6e8
Fix synopsys odd/even frame bit for IN ISO endpoints
...
For ISO endpoint driver has to specify when data
is to be transmitted (odd or even frame).
Currently code was not updating this bit resulting in
data being sent every other frame.
If interval was 1ms full data packed was sent every 2ms, and
ZLP was sent in between.
2020-08-04 09:32:41 +02:00
7d9efd0697
manually submit unplugged event for nrf dcd_disconnect()
2020-08-04 14:18:12 +07:00
026a1e7ac8
Merge pull request #478 from hathach/move-dcdconnect-to-dcdinit
...
Move pull-up enabling to dcd_init() instead of usbd
2020-08-04 14:11:32 +07:00
c557bf7b2e
Implement dynamic FIFO RAM allocation according to configuration desc.
2020-08-03 19:48:05 +02:00
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning
...
fix msp430 gcc 9.2.0 warning
2020-08-02 12:53:03 +07:00
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event
...
correct isr context for nrf DCD_EVENT_UNPLUGGED
2020-08-01 12:31:48 +07:00
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
...
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
c3b0389f10
Fix synopsys size check for ISO endpoint
...
Constraint was incorrect for ISO endpoint as stated in TODO.
2020-07-31 15:52:21 +02:00
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs]
2020-07-29 17:04:47 +07:00
5af08e2ffc
fix strict prototype
2020-07-29 16:59:07 +07:00
78f1576e93
Merge pull request #412 from hathach/fix-net-cast-align
...
suppress cast-align warnings for net device driver
2020-07-29 11:23:11 +07:00
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos
...
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
2020-07-28 15:16:15 +07:00
a1a390a788
Update dcd_esp32s2.c
2020-07-28 10:54:23 +03:00
6976e64217
fix msp430 gcc 9.2.0 warning in #465
2020-07-28 14:36:15 +07:00
01903a4a6d
Implement dynamic reallocation of RX and TX fifos for EP0.
...
Tested with EP0 size 8/16/32/64.
2020-07-27 21:03:20 +02:00
5e3f90cd6e
add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset
2020-07-26 19:21:30 +02:00
1269bb440a
Fix structure definition audio_control_range_X_n_t
2020-07-25 14:31:25 +02:00
e047fbe8fb
Merge remote-tracking branch 'upstream/master' into uac2
2020-07-25 14:26:24 +02:00
d91843bcd2
Get and set requests work
2020-07-25 11:18:50 +02:00
503c15217e
example to call tud_init() after freeRTOS kernel is started
...
add note for usb init when using with RTOS
2020-07-23 09:20:45 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
7d2fc12445
Merge pull request #469 from hathach/followup-pr466-pr468
...
Followup pr466 pr468
2020-07-21 21:56:57 +07:00
dfca92d29b
follow up to pr468
2020-07-21 21:06:10 +07:00
be744e1e01
Merge pull request #466 from chang196700/feature/string_desc_msos
...
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
2020-07-21 20:25:08 +07:00
141db1278a
Make definition of CFG_TUD_AUDIO_CTRL_BUF_SIZE mandatory
2020-07-20 20:24:05 +02:00
fdb156a3bb
Implement control EP0 buffer and get rid of CFG_TUD_AUDIO_USE_TX_FIFO
2020-07-20 20:18:45 +02:00
3822a6a385
FreeRTOS: Yield from ISR to notify the USB task
...
If we do not yeld in ISR when we write to queue/give semaphore, the scheduler will not know of the change and will not check the queue untill the next OS tick. This change causes the task to be called immediately and makes communication many times faster.
2020-07-20 00:46:16 +03:00
5cd654838b
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
...
Signed-off-by: Chang Feng <chang_196700@hotmail.com>
2020-07-19 19:13:17 +08:00
077e881c92
Implement all missing A.17 control selectors
2020-07-19 11:53:35 +02:00
47bcedc0b4
Add A.17.4 - Terminal Control Selectors
2020-07-18 19:27:00 +02:00
881025afdc
add new name warning to cdc and midi (skip msc, hid warning for now)
2020-07-17 23:01:39 +07:00
7baeea7a00
update actual link speed for spresense
2020-07-17 18:28:19 +07:00
d0f3d03933
Intermediate commit.
2020-07-17 08:40:10 +02:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
5ca748a68e
rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
...
rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
2020-07-16 15:34:16 +07:00
fea6fb73a1
add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun
2020-07-16 13:04:10 +07:00
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
323ae5a84f
Improve comment on CDC tud_cdc_write_available()
...
Fixes #460
2020-07-10 12:24:09 +01:00
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
dbced9911d
Merge pull request #447 from hathach/add-stm-hs
...
Add support for STM32 OTG HS core
2020-07-08 19:47:24 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
6178f8de2f
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
...
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
2020-07-01 13:38:59 +03:00
0c9932440b
Merge pull request #452 from hathach/fix-dfu-rt
...
Fix dfu rt
2020-07-01 15:24:39 +07:00
12a145b27d
fix dfu-rt to response to SET_INTERFACE and DFU_GETSTATUS
...
fix #450
2020-07-01 01:33:02 +07:00
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
7ae47a9397
Call tud_cdc_tx_cb right after flush to keep tx fifo full
2020-06-20 22:12:10 -07:00
Jerzy Kasenberg