espressif_tinyusb/hw/bsp/lpcxpresso1347/board.mk

DEPS_SUBMODULES += hw/mcu/nxp/lpcopen

CFLAGS += \
  -flto \
  -mthumb \
  -mabi=aapcs \
  -mcpu=cortex-m3 \
  -nostdlib \
  -DCORE_M3 \
  -D__USE_LPCOPEN \
  -DCFG_EXAMPLE_MSC_READONLY \
  -DCFG_EXAMPLE_VIDEO_READONLY \
  -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \
  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
  -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' 

# startup.c and lpc_types.h cause following errors
CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls

MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx

# All source paths should be relative to the top level.
LD_FILE = hw/bsp/$(BOARD)/lpc1347.ld

SRC_C += \
	src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
	$(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \
	$(MCU_DIR)/src/chip_13xx.c \
	$(MCU_DIR)/src/clock_13xx.c \
	$(MCU_DIR)/src/gpio_13xx_1.c \
	$(MCU_DIR)/src/iocon_13xx.c \
	$(MCU_DIR)/src/sysctl_13xx.c \
	$(MCU_DIR)/src/sysinit_13xx.c

INC += \
	$(TOP)/$(MCU_DIR)/inc

# For freeRTOS port source
FREERTOS_PORT = ARM_CM3

# For flash-jlink target
JLINK_DEVICE = LPC1347

# flash using jlink
flash: flash-jlink
add nxp_lpcopen as submodule 2021-04-28 13:11:49 +02:00			`DEPS_SUBMODULES += hw/mcu/nxp/lpcopen`
merge no-family example build specify FAMILY_SUBMODULES for all boards 2021-03-04 16:50:45 +01:00
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00			`CFLAGS += \`
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out). 2019-11-20 10:06:40 +01:00			`-flto \`
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00			`-mthumb \`
			`-mabi=aapcs \`
			`-mcpu=cortex-m3 \`
			`-nostdlib \`
			`-DCORE_M3 \`
			`-D__USE_LPCOPEN \`
fix #130 2019-09-11 06:55:16 +02:00			`-DCFG_EXAMPLE_MSC_READONLY \`
Add compile option to allocate video data into flash in video_capture example 2021-10-09 16:02:18 +02:00			`-DCFG_EXAMPLE_VIDEO_READONLY \`
board_test work with lpcxpresso55s69 2019-09-03 08:25:36 +02:00			`-DCFG_TUSB_MCU=OPT_MCU_LPC13XX \`
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered 2019-10-04 08:13:51 +02:00			`-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \`
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00			`-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'`

adding lpcxpresso11u37 board 2019-09-06 10:06:04 +02:00			`# startup.c and lpc_types.h cause following errors`
fix buid_board.py script 2022-06-29 09:06:44 +02:00			`CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls`
adding lpcxpresso11u37 board 2019-09-06 10:06:04 +02:00
update makefile for lpc boards 2019-11-11 05:51:51 +01:00			`MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx`
clean up lpc makefile 2019-09-09 07:39:58 +02:00
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00			`# All source paths should be relative to the top level.`
clean up LD_FILE using $(BOARD) make it easier to duplicate bsp 2020-03-07 11:49:30 +01:00			`LD_FILE = hw/bsp/$(BOARD)/lpc1347.ld`
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00
			`SRC_C += \`
explicitly add dcd source file without vendor/family 2021-03-17 10:52:07 +01:00			`src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \`
clean up lpc makefile 2019-09-09 07:39:58 +02:00			`$(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \`
			`$(MCU_DIR)/src/chip_13xx.c \`
			`$(MCU_DIR)/src/clock_13xx.c \`
			`$(MCU_DIR)/src/gpio_13xx_1.c \`
			`$(MCU_DIR)/src/iocon_13xx.c \`
			`$(MCU_DIR)/src/sysctl_13xx.c \`
			`$(MCU_DIR)/src/sysinit_13xx.c`
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00
			`INC += \`
clean up lpc makefile 2019-09-09 07:39:58 +02:00			`$(TOP)/$(MCU_DIR)/inc`
add makefile support for lpcxpresso1347 2019-05-14 13:34:57 +02:00
			`# For freeRTOS port source`
			`FREERTOS_PORT = ARM_CM3`

			`# For flash-jlink target`
			`JLINK_DEVICE = LPC1347`

			`# flash using jlink`
			`flash: flash-jlink`