b809429873
minor clean up
2021-11-02 14:51:15 +07:00
aa682d7301
add fix for stm32l4 (version 3.10a) which generate transfer complete when setup recieved and control out data complete
2021-11-02 13:52:30 +07:00
9245b8f89f
Merge pull request #1164 from suda-morris/refactor/update_include_header_esp32xx_dcd
...
update dcd_esp32sx with correct include list
2021-11-01 15:24:51 +07:00
215e0595ab
change F207 to use new dwc2
2021-10-31 00:09:40 +07:00
b85a6898af
remove dcd_efm32
2021-10-30 20:45:58 +07:00
9cd5a87c64
add support for EFM32GG
...
merge GG12 GG12 to simply OPT_MCU_EFM32GG
2021-10-30 20:42:55 +07:00
660e8b8c88
skip snpsid check for gd32, abstract phyfs turnaround, set max timeout calibration.
...
still has issue with gd32 with msc (does work with running with rtt as
log).
2021-10-29 16:08:19 +07:00
6c67fc4125
correctly init hs phy for bcm
2021-10-29 00:53:30 +07:00
7def380058
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 12:52:18 +07:00
49aa69a301
update bcm dcd
2021-10-26 23:57:48 +07:00
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
9f1cd1a753
add synopsys id check, rename GCCFG_* to STM32_GCCFG-*
2021-10-26 23:10:26 +07:00
bb5dab5c2e
add hw config struct
2021-10-26 22:48:01 +07:00
68fa9d4064
enhance fifo read/write
2021-10-26 13:56:56 +07:00
5d05f8758f
more clean up
2021-10-26 13:36:43 +07:00
4ebfd00d67
clean up
2021-10-26 13:33:40 +07:00
de413183d4
use dwc2->epin
2021-10-26 13:07:00 +07:00
e7655a7567
update the access epout
2021-10-26 13:02:26 +07:00
34844c9061
use dwc2->fifo[]
2021-10-26 12:53:29 +07:00
5e1a031800
complete dwc2 regs struct
2021-10-26 12:22:41 +07:00
3755814f57
add epin, epout to dwc2 regs
2021-10-26 11:49:59 +07:00
8df078dc9e
more rename
2021-10-26 11:11:46 +07:00
7369d2441d
update dwc2_type
2021-10-26 00:55:24 +07:00
460052c8a0
spacing
2021-10-25 21:20:58 +07:00
7d0d6f85f2
update dcd_esp32sx with correct include list
2021-10-25 21:53:14 +08:00
dbd31895bc
change usage of TU_CHECK_MCU() to prevent macro conflict
2021-10-25 17:04:03 +07:00
85e18b9172
house keeping
2021-10-25 15:58:12 +07:00
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
9f014b059a
properly handle Program Change and Channel Aftertouch messages
2021-10-25 00:07:59 -07:00
a0202df920
add TU_ARGS_APPLY(), TU_CHECK_MCU() now could check list of mcus
2021-10-25 13:49:59 +07:00
61c80840c3
update dwc int enable/disable
2021-10-25 00:40:21 +07:00
4ab931a361
more clean up
2021-10-25 00:23:18 +07:00
0e7c103e98
minor rename
2021-10-25 00:11:17 +07:00
32742571da
switch gd32 and stm32f4 to use new dwc2 driver
2021-10-25 00:06:57 +07:00
06de6b725c
adding generalized dwc2 driver
2021-10-24 23:24:46 +07:00
55e0b5882a
Merge pull request #1160 from cr1901/msp-fix
...
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incre…
2021-10-24 17:28:11 +07:00
109b7a6661
more wMaxPacketSize
2021-10-24 14:39:02 +07:00
5af989384b
remove ep descriptor wMaxPacketSize bitfield due to endian issue
2021-10-24 13:11:21 +07:00
6f5b197a98
indent
2021-10-24 08:44:58 +07:00
07c74c76d0
msp430x5xx: Set base of transmit_packet buffer earlier to avoid incrementing past unsent data.
2021-10-23 14:04:44 -04:00
311c05b401
Merge branch 'master' into fix-warnings
2021-10-23 21:23:56 +07:00
b541c0f5e0
Merge pull request #1150 from kkitayam/change_input_terminal_type_to_camera
...
UVC example: change input terminal type to camera from external
2021-10-23 20:48:52 +07:00
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
5e437ee186
pi cm4 enumerated as full speed device
2021-10-22 21:55:15 +07:00
b3b6b4f785
Update _negotiate_streaming_parameters() to handle some requests
2021-10-19 21:49:00 +09:00
4bfab30c02
Merge pull request #1139 from hathach/release-0.12.0
...
update changelog and increase version for 0.12.0
2021-10-19 13:27:53 +07:00
4fd0ee4eef
Implement GET_DEF and GET_LEN handling on Probe/Commit entities of streaming interface
2021-10-18 21:53:38 +09:00
6fcf4bee8c
suppress null-dereference by usbh and lwip
2021-10-18 11:42:00 +07:00
a7dd5b616c
fix -Wnull-dereference in midi_device
2021-10-18 01:11:27 +07:00
826b34a8ac
enable -Wnull-dereference
2021-10-18 00:13:40 +07:00
099d3b377f
add volatile to EPx_REGS for -Wcast-qual
...
since gcc does difference between volatile struct and member when
casting pointer
2021-10-17 17:33:14 +07:00
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
a5f516893b
more with -Wcast-qual
2021-10-17 16:36:53 +07:00
7325dd6335
Change input terminal type to camera
2021-10-16 12:06:13 +09:00
0b249618b0
fix -Wcast-qual
2021-10-15 23:54:31 +07:00
bf4b133084
dcd_da146xx: Drop unexpected data
...
USB3CV tool verifies MSC device by sending too short or
too long packets.
In case of too long packets (msc_device requested 31 bytes
but incoming data had 32 bytes) extra byte(s) were left in
FIFO resulting in some data mismatch later on.
Now if more data is received in packet that expected extra
bytes are just dropped.
2021-10-15 12:02:15 +02:00
49aa0b72a8
dcd_da146xx: Fix EPIN stall notification handling
...
Normal TX handler for IN non-0 endpoints is called during
outgoing transfer or just after it was finished.
It may need to fill TX fifo with same data if TX_DONE is present
but ACK_STAT is not.
It may need to fill more data when called during transfer.
But it may also be called when STALL was sent.
In this case TX_DONE is set ACK_STAT is not, just like for packets
that were sent but no ACK was received.
Code was trying to send something again. There was nothing to send
so empty ZLP was scheduled for stalled endpoint.
This ZLP was later send to host where valid response was required.
This change checks if notification was for STALL endpoint and
does not try to fill TX FIFO in that case.
2021-10-15 12:02:15 +02:00
7596cb3079
update some sense warning from -Wconversion
2021-10-15 15:54:32 +07:00
06d9555389
More warning cleanup
...
- physically suppress warnings in TinyUSB headers using pragmas so they don't break -Werror compilation of external files that include them
- fix compiler warnings in rp2040 port
- add cmake method to rp2040 port to allow an external project to suppress warnings in TinyUSB itself
2021-10-14 15:23:26 -05:00
7667299b48
Remove compiler warning
2021-10-14 12:13:39 -05:00
2a795d5fd0
Fix GUID of video compression formats
2021-10-14 23:15:35 +09:00
5cfe293001
update changelog and increase version for 0.12.0
2021-10-13 17:32:34 +07:00
9da234cd7c
Merge pull request #1101 from kasjer/kasjer/da146xx-bus-reset-sleep
...
da146xx bus reset and sleep reworked
2021-10-13 16:33:54 +07:00
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
379537cb6d
Merge branch 'master' into add_uvc
2021-10-12 22:01:02 +07:00
67f1603833
Fix a typo
2021-10-12 23:35:19 +09:00
4d9e44e09c
more rename
2021-10-12 01:12:26 +07:00
7afcb1e5d5
minor code clean up without functionality changes
2021-10-12 00:56:20 +07:00
4d170614dc
rename some video constants
2021-10-11 23:18:24 +07:00
b3bfce2cb7
update the descriptor endpoint ISO for nrf5x
2021-10-11 16:07:34 +07:00
ecec0370ca
Merge pull request #1107 from majbthrd/add_ncm
...
add NCM driver in a compatible manner : hathach/tinyusb#550
2021-10-11 15:57:46 +07:00
a6723f556d
add ncm.h for magic number
...
mostly clean up magic number
2021-10-11 12:36:03 +07:00
a8eea9f6a5
add backward compatible with warnings for CFG_TUD_NET
2021-10-09 11:28:55 +07:00
431650fb7d
Merge branch 'j4cbo-ncm' into majbthrd-add_ncm
2021-10-05 16:32:37 +07:00
a867d87072
rename CFG_TUD_NET to CFG_TUD_ECM_RNDIS
2021-10-05 16:00:07 +07:00
31cfd5a684
Merge branch 'add_ncm' of https://github.com/majbthrd/tinyusb into majbthrd-add_ncm
2021-10-05 11:39:32 +07:00
aa97b419b2
Handle HID devices with OUT endpoint listed first
...
This happens on my PowerA wired Switch pro controller
2021-10-04 11:43:12 +01:00
d9bda631d4
Merge pull request #1120 from hathach/enhance
...
house keeping update
2021-10-01 23:31:21 +07:00
fec2d15989
clean up vendor open
2021-10-01 23:00:09 +07:00
75ad0c7d31
clean up
2021-10-01 22:53:14 +07:00
fdd1e4fbf0
more usbd clean up
2021-10-01 21:52:29 +07:00
c851229eea
Merge pull request #1063 from HiFiPhile/uac_fifo
...
UAC2: Add xfer_fifo support for dcd_transdimension.
2021-10-01 00:17:51 +07:00
7708997a67
change scsis status to phase error when total_bytes < block_count
2021-09-30 20:14:23 +07:00
14514d7087
Merge branch 'master' of https://github.com/szymonh/tinyusb into szymonh-master
2021-09-30 20:02:32 +07:00
4ca466b00b
Update comments
2021-09-29 22:59:46 +09:00
9bcab53c2c
Implement frame rate settings
2021-09-29 22:53:26 +09:00
dba5e7b17d
Implement negotiation process for streaming parameters
2021-09-29 21:23:19 +09:00
0c89292a8d
Fix transfer failure when reconnecting
2021-09-29 21:23:19 +09:00
a15c354329
Fix typo
2021-09-29 21:23:18 +09:00
f7bbdea0b8
Refactor application API parameters
2021-09-29 21:23:17 +09:00
0d6496886c
Change frame buffer management
2021-09-29 21:23:17 +09:00
d88cc23ca5
Refactor packet handling
2021-09-29 21:23:17 +09:00
cd3f6eac2f
Fix streaming payload handling
2021-09-29 21:23:16 +09:00
3cb4bb391d
Separate a handling resource into controller and streaming
2021-09-29 21:23:16 +09:00
2b4e02f192
Implement some mandatory requests on streaming interface
2021-09-29 21:23:16 +09:00
4995d9cbd2
Fix handling for set_interface
2021-09-29 21:23:15 +09:00
20572a6ed2
Fix regarding standard video stream request
2021-09-29 21:23:15 +09:00
d026f17457
fix: configuration descriptor has incorrectly sizes
...
update some descriptors
2021-09-29 21:23:15 +09:00
019c1ab09e
add tentative example
2021-09-29 21:23:14 +09:00
hathach