update bcm dcd

This commit is contained in:
hathach 2021-10-26 23:57:48 +07:00
parent 07829510e7
commit 49aa69a301
3 changed files with 11 additions and 11 deletions

View File

@ -181,7 +181,7 @@
#define DCD_ATTR_ENDPOINT_MAX 4
//------------- Broadcom -------------//
#elif TU_CHECK_MCU(BCM2711)
#elif TU_CHECK_MCU(OPT_MCU_BCM2711)
#define DCD_ATTR_ENDPOINT_MAX 8
#else

View File

@ -37,9 +37,9 @@
// We disable SOF for now until needed later on
#define USE_SOF 0
#if TUSB_OPT_DEVICE_ENABLED && \
( (CFG_TUSB_MCU == OPT_MCU_BCM2711 ) \
)
#if TUSB_OPT_DEVICE_ENABLED && \
(CFG_TUSB_MCU == OPT_MCU_BCM2711 ) \
// EP_MAX : Max number of bi-directional endpoints including EP0
// EP_FIFO_SIZE : Size of dedicated USB SRAM
@ -656,10 +656,10 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
TU_ASSERT(epnum < EP_MAX);
xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
xfer->max_size = desc_edpt->wMaxPacketSize.size;
xfer->max_size = tu_edpt_packet_size(desc_edpt);
xfer->interval = desc_edpt->bInterval;
uint16_t const fifo_size = (desc_edpt->wMaxPacketSize.size + 3) / 4; // Round up to next full word
uint16_t const fifo_size = (xfer->max_size + 3) / 4; // Round up to next full word
if(dir == TUSB_DIR_OUT)
{
@ -678,7 +678,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
out_ep[epnum].DOEPCTL |= (1 << USB_OTG_DOEPCTL_USBAEP_Pos) |
(desc_edpt->bmAttributes.xfer << USB_OTG_DOEPCTL_EPTYP_Pos) |
(desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DOEPCTL_SD0PID_SEVNFRM : 0) |
(desc_edpt->wMaxPacketSize.size << USB_OTG_DOEPCTL_MPSIZ_Pos);
(xfer->max_size << USB_OTG_DOEPCTL_MPSIZ_Pos);
dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_OEPM_Pos + epnum));
}
@ -720,7 +720,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
(epnum << USB_OTG_DIEPCTL_TXFNUM_Pos) |
(desc_edpt->bmAttributes.xfer << USB_OTG_DIEPCTL_EPTYP_Pos) |
(desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS ? USB_OTG_DIEPCTL_SD0PID_SEVNFRM : 0) |
(desc_edpt->wMaxPacketSize.size << USB_OTG_DIEPCTL_MPSIZ_Pos);
(xfer->max_size << USB_OTG_DIEPCTL_MPSIZ_Pos);
dev->DAINTMSK |= (1 << (USB_OTG_DAINTMSK_IEPM_Pos + epnum));
}
@ -1010,7 +1010,7 @@ static void handle_rxflvl_ints(uint8_t rhport, USB_OTG_OUTEndpointTypeDef * out_
if (xfer->ff)
{
// Ring buffer
tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *) rx_fifo, bcnt);
tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void *)(uintptr_t) rx_fifo, bcnt);
}
else
{
@ -1130,7 +1130,7 @@ static void handle_epin_ints(uint8_t rhport, USB_OTG_DeviceTypeDef * dev, USB_OT
if (xfer->ff)
{
usb_fifo_t tx_fifo = FIFO_BASE(rhport, n);
tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *) tx_fifo, packet_size);
tu_fifo_read_n_const_addr_full_words(xfer->ff, (void *)(uintptr_t) tx_fifo, packet_size);
}
else
{

View File

@ -370,7 +370,7 @@ static bool USB_HS_PHYCInit(void)
{
USB_HS_PHYC_GlobalTypeDef *usb_hs_phyc = (USB_HS_PHYC_GlobalTypeDef*) USB_HS_PHYC_CONTROLLER_BASE;
// Enable LDO
// Enable LDO: Note STM32F72/3xx Reference Manual rev 3 June 2018 incorrectly defined this bit as Disabled !!
usb_hs_phyc->USB_HS_PHYC_LDO |= USB_HS_PHYC_LDO_ENABLE;
// Wait until LDO ready