hathach
|
13d37e4a36
|
lpcxpresso1549 board test running
|
2019-10-03 15:23:01 +07:00 |
hathach
|
7fd68efe7b
|
couldn't get 32L4 running with crystal less mode
|
2019-10-03 13:37:10 +07:00 |
hathach
|
0a20e91cc9
|
move linker file to blue pill bsp
|
2019-10-02 14:23:23 +07:00 |
hathach
|
0673be7724
|
ported stm32f1, tested with f103 blue pill
|
2019-10-02 12:01:34 +07:00 |
hathach
|
6479ee53d5
|
-Wno-error=cast-function-type is only available for gcc 8+, change travis dist to bionic
|
2019-10-01 15:43:28 +07:00 |
hathach
|
6183dbd0ce
|
add -Wextra for more warnings to example
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
|
2019-09-27 00:15:43 +07:00 |
hathach
|
7b2f8cc73a
|
added stm32 L0 support
close #125
|
2019-09-20 13:49:33 +07:00 |
hathach
|
80b430fcfc
|
added stm32L0538 discovery board, board test exmaple works
|
2019-09-20 13:02:17 +07:00 |
hathach
|
3440083bfd
|
added board feather stm32f045
|
2019-09-18 14:38:56 +07:00 |
hathach
|
98a68d600c
|
Merge pull request #131 from cr1901/pyboard
Add PyBoard BSP
|
2019-09-14 16:31:43 +07:00 |
William D. Jones
|
d7137e36ca
|
pyboardv11: Fix typo in HSE_VALUE define so that SysTick runs at correct
frequency.
|
2019-09-14 04:32:10 -04:00 |
hathach
|
9e96c10014
|
Merge pull request #151 from hathach/develop
fix #139, correct usbd request intepreting, Non-STD request to Interf… … …ace must be forward to class driver
|
2019-09-13 13:14:18 +07:00 |
hathach
|
986beda9eb
|
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
|
2019-09-13 11:22:44 +07:00 |
Nathan Conrad
|
f830f6956e
|
Correct port assigned on the STM32F070 BSP
|
2019-09-12 14:53:53 -04:00 |
hathach
|
72046d957c
|
fix #145
|
2019-09-12 10:43:16 +07:00 |
hathach
|
ff7261600c
|
ported stm32f2, added board stm32f207zg nucleo
close #127
|
2019-09-12 10:41:03 +07:00 |
William D. Jones
|
6b79f399a1
|
Merge branch 'master' of https://github.com/hathach/tinyusb into pyboard
|
2019-09-11 14:14:02 -04:00 |
hathach
|
a3f1c269e9
|
added stm32f767nucleo board, board_test works
|
2019-09-11 18:02:27 +07:00 |
hathach
|
de659be83e
|
tested all the stm32f4 board, work great
|
2019-09-11 17:37:23 +07:00 |
hathach
|
8a2b228c3f
|
ported stm32f3, close #67
|
2019-09-11 16:56:26 +07:00 |
hathach
|
ec50b274fc
|
added stm32f072disco board
close #104
|
2019-09-11 12:05:55 +07:00 |
hathach
|
3f02c35983
|
fix #130
|
2019-09-11 11:55:16 +07:00 |
hathach
|
34b76898da
|
adding stm32f072disco board, board_test example running
|
2019-09-11 11:41:47 +07:00 |
hathach
|
bf76a1e49e
|
Merge pull request #136 from hathach/develop
fix #132
|
2019-09-11 11:16:47 +07:00 |
hathach
|
678ba586df
|
Merge pull request #122 from cr1901/synopsys
Synopsys Refactor
|
2019-09-11 10:37:49 +07:00 |
William D. Jones
|
fc10ff2f05
|
Add pyboard (v1.1) BSP. cdc_msc_hid example tested.
|
2019-09-10 14:10:33 -04:00 |
Nathan Conrad
|
4f6bedeac9
|
Rename the STM32 MCU options.
|
2019-09-10 12:57:43 -04:00 |
Nathan Conrad
|
65e72de7ce
|
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
|
2019-09-10 09:35:52 -04:00 |
Nathan Conrad
|
2cf2f35fa3
|
Correct JLINK_DEVICE and FREERTOS_PORT in F070RB make file. FreeRTOS and j-link are untested.
|
2019-09-10 08:28:56 -04:00 |
Nathan Conrad
|
f7b0aeec52
|
Start clock on F0 and F0, and handle USB interrupts.
|
2019-09-09 19:20:26 -04:00 |
Nathan Conrad
|
d1976a30b3
|
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
|
2019-09-09 16:14:38 -04:00 |
William D. Jones
|
1385d7c494
|
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
|
2019-09-09 10:48:14 -04:00 |
hathach
|
b9b9f67698
|
ngx4330 usb0 work well
|
2019-09-09 17:30:43 +07:00 |
hathach
|
3497dd0264
|
adding ngx4330
|
2019-09-09 16:47:57 +07:00 |
hathach
|
218aaf94de
|
more clean up
|
2019-09-09 13:19:00 +07:00 |
hathach
|
4f4182e171
|
clean up lpc makefile
|
2019-09-09 12:39:58 +07:00 |
hathach
|
8ac115a33e
|
clean up
|
2019-09-09 12:25:39 +07:00 |
hathach
|
4663f9084d
|
ported board stm32f412g discovery
- added soft connect for enable pull up register dcd stm32f4
|
2019-09-08 21:57:02 +07:00 |
hathach
|
642ff56b32
|
ported pca10059
|
2019-09-08 21:55:03 +07:00 |
hathach
|
8fd7836ff6
|
added board stm32f412 discovery, board_test exmaple run
|
2019-09-06 17:31:37 +07:00 |
hathach
|
b1296139d0
|
board test run with lpcxpresso 11u37
|
2019-09-06 15:49:42 +07:00 |
hathach
|
4ef3946a25
|
adding lpcxpresso11u37 board
|
2019-09-06 15:06:04 +07:00 |
hathach
|
192a95a96e
|
moving lpc11u6x
|
2019-09-06 12:07:48 +07:00 |
hathach
|
fae8a944f0
|
swith stm32h7 to use st_driver
|
2019-09-05 23:39:09 +07:00 |
hathach
|
1d2223a116
|
switch stm32f3 to use st_driver
|
2019-09-05 22:41:58 +07:00 |
hathach
|
c4b384d22f
|
switch stm32f4 to use st_driver submodule
|
2019-09-05 22:12:43 +07:00 |
hathach
|
143a138028
|
Merge pull request #116 from hathach/develop
Board update
|
2019-09-05 16:18:34 +07:00 |
hathach
|
a90e2aa2ce
|
55s69 device work with usb0
|
2019-09-05 16:12:13 +07:00 |
hathach
|
7350e9c25c
|
Merge pull request #114 from cr1901/stm32h7
STM32H7 Support
|
2019-09-05 15:29:13 +07:00 |
hathach
|
dd07e743d8
|
added mbed lpc1768 board
|
2019-09-05 14:29:17 +07:00 |
hathach
|
2e00019aae
|
board_test work with lpcxpresso55s69
|
2019-09-03 13:25:36 +07:00 |
William D. Jones
|
4ce8796b2a
|
board_stm32h743nucleo: Implement user button for mouse/keyboard demo.
|
2019-09-03 01:28:41 -04:00 |
hathach
|
85fae75fba
|
clean up
|
2019-09-02 15:34:47 +07:00 |
hathach
|
6268f395eb
|
add button for stm32f407 and stm32f411 board
|
2019-09-02 14:58:46 +07:00 |
hathach
|
f2bbb75695
|
clean up
|
2019-09-01 22:44:56 +07:00 |
hathach
|
67d2cf39d5
|
clean up
|
2019-09-01 21:04:43 +07:00 |
hathach
|
aeea6754af
|
rename lpc_usbd to lpc_ip3511
|
2019-09-01 16:44:40 +07:00 |
hathach
|
3067809957
|
adding lpc54xxx to dcd, able to go through enumeration
|
2019-09-01 16:15:23 +07:00 |
hathach
|
403662a1d6
|
board_test run with lpc54114
|
2019-09-01 15:58:42 +07:00 |
hathach
|
fb1ca24b02
|
adding lpc54114 port
|
2019-09-01 15:30:25 +07:00 |
hathach
|
e99ff703dc
|
more lpc51u68 driver clean up
|
2019-09-01 15:11:09 +07:00 |
hathach
|
a5a768e5f7
|
update lpc51u68 linker
|
2019-09-01 14:58:36 +07:00 |
hathach
|
803d06d685
|
clean up
|
2019-09-01 14:51:40 +07:00 |
hathach
|
c18a7fd9ad
|
Port new board circuitplayground_bluefruit, close #109
|
2019-09-01 11:51:12 +07:00 |
hathach
|
7010ea79c4
|
added new board circuit playground express, close #110
|
2019-09-01 11:44:55 +07:00 |
hathach
|
c6f356b4f4
|
change feather/metro m4_express button to D5
|
2019-09-01 11:20:22 +07:00 |
hathach
|
f02a24a10f
|
change metro_m0_express button to D5
|
2019-09-01 11:11:26 +07:00 |
hathach
|
bb21568875
|
ported feather m0 express close #108
|
2019-09-01 11:10:28 +07:00 |
hathach
|
30f707cad2
|
rename lpc11_13_15 to simply lpc_usbd since it is almost used by in recent year for nxp mcu
|
2019-09-01 00:51:58 +07:00 |
hathach
|
0ab8829e55
|
fix segger embbeded studio compile issue
|
2019-08-31 23:53:10 +07:00 |
hathach
|
bac75a81fd
|
support LPC51u68 #100
|
2019-08-31 22:44:08 +07:00 |
hathach
|
c70c61ce26
|
add button read to board_test example
|
2019-08-31 17:52:24 +07:00 |
William D. Jones
|
7153561984
|
stm32h7: Enable USB peripheral (device does not enumerate yet).
|
2019-08-30 21:57:06 -04:00 |
William D. Jones
|
0afbf1a9bb
|
board_stm32h743nucleo: Route USB clock and pins.
|
2019-08-26 16:48:24 -04:00 |
William D. Jones
|
1ef98e503a
|
board_stm32h743nucleo: Route major clocks and LED pins.
|
2019-08-26 14:20:13 -04:00 |
hathach
|
fa796de6cd
|
board_test example run with lpcxpresso51u68
|
2019-08-26 12:24:46 +07:00 |
William D. Jones
|
0fb9ab9a09
|
stm32h7: Add empty template cdc_msc_hid example for STM32H743 Nucleo board that compiles.
|
2019-08-24 12:40:18 -04:00 |
hathach
|
d4895c4af6
|
add board_test example for testing new board
|
2019-08-24 23:30:35 +07:00 |
hathach
|
b3acce17cc
|
adding lpc51u68 support
|
2019-08-24 00:52:46 +07:00 |
hathach
|
e5e73ed76c
|
drop board_* in bsp c file
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
|
2019-08-23 23:35:55 +07:00 |
hathach
|
ba056de982
|
clean up
|
2019-08-05 22:12:20 +07:00 |
hathach
|
d211035a0a
|
merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c
|
2019-08-05 21:54:20 +07:00 |
hathach
|
2b43bba453
|
add missing conf file
|
2019-07-22 18:54:13 +07:00 |
hathach
|
1594a9de71
|
stm32f411 usb work with example
|
2019-07-22 18:53:52 +07:00 |
hathach
|
be4eeeb943
|
refactor stm32f407 to use st hal api
|
2019-07-22 18:45:12 +07:00 |
hathach
|
cb8a33ca87
|
able to blink LED with stm32f411
|
2019-07-20 22:59:24 +07:00 |
hathach
|
ed698069d3
|
clean up
|
2019-07-20 22:41:45 +07:00 |
hathach
|
6ec87071ed
|
able to flash and turn on LED
|
2019-07-20 22:38:46 +07:00 |
hathach
|
fa12a0e786
|
adding stm32f411 disco
compile ok
|
2019-07-19 21:19:06 +07:00 |
hathach
|
e909270843
|
rename bsp of stm32 board
|
2019-07-19 20:37:38 +07:00 |
hathach
|
d2f53c552a
|
added adafruit feather m4 express board
|
2019-07-01 22:57:23 +07:00 |
hathach
|
90fea785c6
|
use adafruit-nrfutil dfu as default flash target for feather nrf52840
|
2019-05-29 16:56:26 +07:00 |
hathach
|
a619511631
|
run tud_task() in board_delay()
|
2019-05-29 16:55:54 +07:00 |
hathach
|
ce6976f400
|
better fix for #72 millis overthrow
|
2019-05-21 13:31:02 +07:00 |
hathach
|
73c7db38f7
|
fix #72 address overflow with board_delay
|
2019-05-21 11:38:46 +07:00 |
hathach
|
6861b670fc
|
add uf2 target for uf2 bootloader board: metro m0/m4 feather nrf52840
|
2019-05-20 12:35:33 +07:00 |
hathach
|
6e9324e29c
|
clean up
|
2019-05-15 18:16:48 +07:00 |
hathach
|
3278a9765b
|
ea4357 build with makefile, add to travis
|
2019-05-15 18:01:58 +07:00 |
hathach
|
7bd16aaf9b
|
add button for ea4357
|
2019-05-15 17:52:29 +07:00 |
hathach
|
15076006ca
|
ea4088 quickstart build with makefile
|
2019-05-15 17:24:21 +07:00 |
hathach
|
6e6f470b58
|
board clean up, add button for ea4088
|
2019-05-15 17:15:02 +07:00 |
hathach
|
9863230a8d
|
update button for mcb1800
|
2019-05-15 16:17:46 +07:00 |
hathach
|
2d58f3118e
|
mcb1800 build and blinky with makefile
|
2019-05-15 16:09:44 +07:00 |
hathach
|
8ccecde18e
|
lpc1769 work with makefile
|
2019-05-15 12:57:31 +07:00 |
hathach
|
2582dfb3af
|
lpcxpresso 1769 build with makefile but not blinky yet
|
2019-05-15 11:34:40 +07:00 |
hathach
|
2e07a09b0d
|
add makefile support for lpcxpresso1347
|
2019-05-14 18:34:57 +07:00 |
hathach
|
3e1897b943
|
makefile work with lpc11u68
|
2019-05-14 17:51:05 +07:00 |
hathach
|
b1f8aa175e
|
add linker and startup for lpcxpresso11u68 board
able to build and blink LED
|
2019-05-14 17:37:11 +07:00 |
hathach
|
851cf5426a
|
more makefile clean up
|
2019-05-14 14:07:06 +07:00 |
hathach
|
8094bdce23
|
makefile clean up
|
2019-05-14 13:59:45 +07:00 |
hathach
|
62f0eb16d6
|
clean up
|
2019-05-14 13:31:12 +07:00 |
hathach
|
3e6d911ce9
|
more clean up use inline bit funciton instead of macros
|
2019-05-14 12:54:29 +07:00 |
hathach
|
61ec407752
|
update license year to 2019
|
2019-05-14 11:48:05 +07:00 |
hathach
|
6446b02ae7
|
add hid_test.py for testing #58
add feather nrf52840 express to supported board
|
2019-05-02 18:10:06 +07:00 |
hathach
|
0f3da42db8
|
add make.mk and rules.mk to help new makefile example
|
2019-05-01 14:27:17 +07:00 |
hathach
|
307ba23046
|
wrap up hid device refactor
|
2019-04-18 22:31:35 +07:00 |
hathach
|
64bed848d0
|
fix #53 use nrfx_usbd_errata.h
|
2019-04-08 17:36:12 +07:00 |
hathach
|
5f3ab2afe1
|
rename board_led_control to board_led_write
|
2019-04-02 18:16:04 +07:00 |
hathach
|
2c1072c0ab
|
fix build error with stm32
|
2019-04-02 02:16:54 +07:00 |
hathach
|
e9851f5042
|
clean up
|
2019-04-02 01:20:51 +07:00 |
hathach
|
8457d0d14c
|
add board_button_read()
|
2019-04-01 18:35:37 +07:00 |
hathach
|
eabfc53f38
|
added tud_suspended() and tud_ready()
|
2019-03-30 23:01:23 +07:00 |
hathach
|
38f7d281d4
|
more board clean up
|
2019-03-27 21:06:44 +07:00 |
hathach
|
3dfb251c1e
|
clean up
|
2019-03-27 16:32:07 +07:00 |
hathach
|
315076375f
|
fix timer prio for freertos to blink led
|
2019-03-25 00:40:51 +07:00 |
hathach
|
18f248b142
|
remove tusb_hal_millis() usage, less work for porting
|
2019-03-24 01:19:32 +07:00 |
hathach
|
29e075b8b9
|
clean up bsp, adde board_millis()
|
2019-03-23 22:31:07 +07:00 |
hathach
|
df1aac44b8
|
add board_noos_millis() for blinky
|
2019-03-23 16:51:07 +07:00 |
hathach
|
43eb1a8b16
|
added stub for dcd_stm32f3
|
2019-03-22 23:57:56 +07:00 |
hathach
|
ba1bea5d53
|
simplify board API, adding stm32f3 discovery
- remove board header since it is not used
|
2019-03-22 22:06:48 +07:00 |
hathach
|
8b7c4ade71
|
clean up
|
2019-03-22 14:55:00 +07:00 |
hathach
|
20fb416783
|
clean board uart read & write
|
2019-03-20 20:58:27 +07:00 |
hathach
|
c211ee19dd
|
migrate license from BSD 3 clause to MIT
|
2019-03-20 16:11:42 +07:00 |
hathach
|
f2f3f5a772
|
fix pca10056 build error due to nrfx undef usage
|
2019-03-20 01:35:52 +07:00 |
hathach
|
e6612ab82c
|
move -nostdlib (-nostartfiles) into board.mk
since nrf5x require the use of std startup. Add verbose mode to makefile
|
2019-03-20 01:23:49 +07:00 |
hathach
|
1062910348
|
readme clean up
|
2019-03-19 16:51:41 +07:00 |
hathach
|
0fcd263df3
|
stm32f place startup*.o first in linking order due to gcc flto bug
ref: https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966
|
2019-03-19 16:41:00 +07:00 |
hathach
|
11eed2f026
|
update flash-jlink target for m0 and m4 board
|
2019-03-17 15:42:57 +07:00 |
hathach
|
d56e7fd913
|
adding flash (jlink)
|
2019-03-16 01:34:26 +07:00 |
hathach
|
eda56769b9
|
dcd_set_address include status response, usbd control stall both control in and out
|
2019-03-13 23:14:48 +07:00 |
hathach
|
195a44172a
|
update stm32 dcd stall control endpoint
|
2019-03-13 16:54:10 +07:00 |
hathach
|
ddfc32f5ec
|
adding segger project for stm32f4
|
2019-03-10 01:24:13 +07:00 |
hathach
|
0ff7d609f0
|
add flash target for stm32 board using stm32cubeprogammger cli
|
2019-03-09 01:04:26 +07:00 |
hathach
|
8418cb816b
|
Merge branch 'master' into stm32f4
|
2019-03-05 05:45:42 -08:00 |
William D. Jones
|
49aa6ec251
|
st: Use submodules for system files when possible, use more up to date
files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect
changes.
|
2019-03-04 10:41:05 -05:00 |
William D. Jones
|
c51b11f103
|
Move all paths using "stm" to "st" subdirectories, update config.mk.
|
2019-02-27 09:15:07 -05:00 |
hathach
|
1a84f5da54
|
nrf5x Let application decide USBD_IRQn priority
|
2019-01-29 19:42:31 +07:00 |
hathach
|
6752a71264
|
usb work when sd is init first
|
2019-01-29 18:02:25 +07:00 |
hathach
|
c81b56eb45
|
nrf5x usb init before sd works
|
2019-01-29 17:05:53 +07:00 |
hathach
|
d8b361fdaa
|
add S140 v6 build config for nrf5x
|
2019-01-29 14:15:13 +07:00 |