hathach
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
hathach
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
d1d8ded43b
added iMX RT1060 EVK board support
...
board_text, cdc_msc, hid_composite all work
2019-11-22 17:36:04 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
hathach
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
636c1475ba
clean up
2019-11-22 12:38:24 +07:00
hathach
627d9a2b33
adding irq to rt1064evk
2019-11-22 00:34:31 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
hathach
54d597b723
rt1064evk led, button, uart all work
2019-11-20 17:10:30 +07:00
hathach
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
hathach
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
Sean Cross
679821e917
fomu: bsp: don't call usb isr when usb is disabled
...
When compiled without usb support, we don't want to call the USB ISR.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:10:37 -08:00
Sean Cross
67267a9399
fomu: bsp: remove unused messible functions
...
These functions are unused in the current implementation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:08:56 -08:00
Sean Cross
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
25d5628063
fomu: csr: sync csr
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
f087cb1580
fomu: crt0: minor text refactor
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
77cf0b5bfd
fomu: csr: add version with next_ev register
...
The Fomu bitstream now includes a `USB_NEXT_EV` register to
indicate which is the next logical event to process. Add this
register to the CSR definition.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
83bca4a74f
fomu: semi-working commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
ef07427e06
bsp: fomu: update
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:13 -08:00
Sean Cross
ba889eeb9e
bsp: fomu: fix linker script overlap
...
The end of the data section was overlapping the start of the bss.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
Sean Cross
f152bed4b4
fomu: initial commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
hathach
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
hathach
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
hathach
d65bc34bfe
added and tested nRF52833DK (pca10100)
2019-11-11 00:11:49 +07:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00
hathach
a19db3bdd2
added board nrf52840 mdk dongle
2019-11-10 20:07:43 +07:00
hathach
943b7467d8
correct LED, button and uart for feather_stm32f405
2019-11-09 00:08:32 +07:00
hathach
3d748e6e2e
Merge branch 'master' into port-samg55
2019-11-05 10:18:32 +07:00
hathach
8cd19f88b9
clean up
2019-11-04 22:03:31 +07:00
hathach
42b55f6621
clean up
2019-11-04 15:00:44 +07:00
hathach
6baa79b330
board test works
2019-11-04 14:54:04 +07:00
Nathan Conrad
68a53e05fc
Merge pull request #2 from hathach/pigrew-ZLP_Request2
...
zlp request2. PR for PR (has issues with STM32F0 FSDEV)
2019-11-03 17:50:41 -05:00
Nathan Conrad
cebc066813
Add UART HAL source file to stm32f070 makefile.
2019-11-03 15:25:55 -05:00
Nathan Conrad
5839159742
Enable UART debugging on F070.
2019-11-03 09:54:02 -05:00
hathach
585aebeb12
add uart support for stm32f072disco
2019-11-03 12:54:05 +07:00
hathach
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
hathach
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
hathach
78bf82291e
add uart support for stm32f4nucleo board (via stlink cdc)
2019-10-19 18:19:59 +07:00
hathach
2f3f23fd94
change to use nrfx uarte
2019-10-18 18:30:09 +07:00
hathach
558b4dbde3
change DEBUG optimization option from O0 to Og
...
add uart write to board test example
2019-10-18 17:50:29 +07:00
hathach
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
hathach
c42edc080c
Merge branch 'master' into develop
2019-10-09 11:03:55 +07:00
Kamil Tomaszewski
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
hathach
281cd858b0
adding lpc1549, but couldnt recieve setup packet, though setup received interrupt is triggered
2019-10-04 15:56:45 +07:00
hathach
13d37e4a36
lpcxpresso1549 board test running
2019-10-03 15:23:01 +07:00
hathach
7fd68efe7b
couldn't get 32L4 running with crystal less mode
2019-10-03 13:37:10 +07:00
hathach
0a20e91cc9
move linker file to blue pill bsp
2019-10-02 14:23:23 +07:00
hathach
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
hathach
6479ee53d5
-Wno-error=cast-function-type is only available for gcc 8+, change travis dist to bionic
2019-10-01 15:43:28 +07:00
hathach
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
hathach
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
hathach
80b430fcfc
added stm32L0538 discovery board, board test exmaple works
2019-09-20 13:02:17 +07:00
hathach
3440083bfd
added board feather stm32f045
2019-09-18 14:38:56 +07:00
hathach
98a68d600c
Merge pull request #131 from cr1901/pyboard
...
Add PyBoard BSP
2019-09-14 16:31:43 +07:00
William D. Jones
d7137e36ca
pyboardv11: Fix typo in HSE_VALUE define so that SysTick runs at correct
...
frequency.
2019-09-14 04:32:10 -04:00
hathach
9e96c10014
Merge pull request #151 from hathach/develop
...
fix #139 , correct usbd request intepreting, Non-STD request to Interf… … …ace must be forward to class driver
2019-09-13 13:14:18 +07:00
hathach
986beda9eb
adding stm32l4 support, board test run with stm32l476disco, usb doens't work yet
2019-09-13 11:22:44 +07:00
Nathan Conrad
f830f6956e
Correct port assigned on the STM32F070 BSP
2019-09-12 14:53:53 -04:00
hathach
72046d957c
fix #145
2019-09-12 10:43:16 +07:00
hathach
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
William D. Jones
6b79f399a1
Merge branch 'master' of https://github.com/hathach/tinyusb into pyboard
2019-09-11 14:14:02 -04:00
hathach
a3f1c269e9
added stm32f767nucleo board, board_test works
2019-09-11 18:02:27 +07:00
hathach
de659be83e
tested all the stm32f4 board, work great
2019-09-11 17:37:23 +07:00
hathach
8a2b228c3f
ported stm32f3, close #67
2019-09-11 16:56:26 +07:00
hathach
ec50b274fc
added stm32f072disco board
...
close #104
2019-09-11 12:05:55 +07:00
hathach
3f02c35983
fix #130
2019-09-11 11:55:16 +07:00
hathach
34b76898da
adding stm32f072disco board, board_test example running
2019-09-11 11:41:47 +07:00
hathach
bf76a1e49e
Merge pull request #136 from hathach/develop
...
fix #132
2019-09-11 11:16:47 +07:00
hathach
678ba586df
Merge pull request #122 from cr1901/synopsys
...
Synopsys Refactor
2019-09-11 10:37:49 +07:00
William D. Jones
fc10ff2f05
Add pyboard (v1.1) BSP. cdc_msc_hid example tested.
2019-09-10 14:10:33 -04:00
Nathan Conrad
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
Nathan Conrad
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
Nathan Conrad
2cf2f35fa3
Correct JLINK_DEVICE and FREERTOS_PORT in F070RB make file. FreeRTOS and j-link are untested.
2019-09-10 08:28:56 -04:00
Nathan Conrad
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
Nathan Conrad
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
William D. Jones
1385d7c494
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 10:48:14 -04:00
hathach
b9b9f67698
ngx4330 usb0 work well
2019-09-09 17:30:43 +07:00
hathach
3497dd0264
adding ngx4330
2019-09-09 16:47:57 +07:00
hathach
218aaf94de
more clean up
2019-09-09 13:19:00 +07:00
hathach
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
hathach
8ac115a33e
clean up
2019-09-09 12:25:39 +07:00
hathach
4663f9084d
ported board stm32f412g discovery
...
- added soft connect for enable pull up register dcd stm32f4
2019-09-08 21:57:02 +07:00
hathach
642ff56b32
ported pca10059
2019-09-08 21:55:03 +07:00
hathach
8fd7836ff6
added board stm32f412 discovery, board_test exmaple run
2019-09-06 17:31:37 +07:00
hathach
b1296139d0
board test run with lpcxpresso 11u37
2019-09-06 15:49:42 +07:00
hathach
4ef3946a25
adding lpcxpresso11u37 board
2019-09-06 15:06:04 +07:00
hathach
192a95a96e
moving lpc11u6x
2019-09-06 12:07:48 +07:00
hathach
fae8a944f0
swith stm32h7 to use st_driver
2019-09-05 23:39:09 +07:00
hathach
1d2223a116
switch stm32f3 to use st_driver
2019-09-05 22:41:58 +07:00
hathach
c4b384d22f
switch stm32f4 to use st_driver submodule
2019-09-05 22:12:43 +07:00
hathach
143a138028
Merge pull request #116 from hathach/develop
...
Board update
2019-09-05 16:18:34 +07:00
hathach
a90e2aa2ce
55s69 device work with usb0
2019-09-05 16:12:13 +07:00
hathach
7350e9c25c
Merge pull request #114 from cr1901/stm32h7
...
STM32H7 Support
2019-09-05 15:29:13 +07:00
hathach
dd07e743d8
added mbed lpc1768 board
2019-09-05 14:29:17 +07:00