912802456b
move protocol message to stack, disable battery in PWR's CR3
...
there is still issue with CC1/CC2 pull down resistor and vstate is not
correct.
2023-06-09 18:15:28 +07:00
0833806980
Fix typos
2023-06-08 15:38:30 +02:00
8181d470e5
enable DMA for both pd rx, tx
2023-06-08 18:55:54 +07:00
9c2a8490af
dma rx works well
2023-06-08 13:37:37 +07:00
fc761953b3
define tuc_int_handler() to empty if TUC not enabled
2023-06-08 09:34:15 +07:00
7fd0a17bc3
default CFG_TUC_ENABLED to 0
2023-06-08 09:11:29 +07:00
0493983a8f
movement of TOP in c0ecf8b5 broke RP2040 SDK build
2023-06-07 14:46:14 -05:00
aaec12a3fb
Merge pull request #2077 from abakosh/renesas_packed
...
fix(RA Host Portable): git rid of the IAR warnings for packed
2023-06-07 19:00:41 +07:00
9b7dee563e
able to response with good crc
2023-06-07 18:57:48 +07:00
8bb012e50b
fix(RA): static assert RUSB2 register
2023-06-07 12:01:59 +02:00
b893f1d541
inital support for usb typec and pd example
2023-06-07 15:10:40 +07:00
914e82b25d
able to receive first PD message
2023-06-07 09:36:37 +07:00
e02eee7477
revert board flash latency to 8
2023-06-07 00:14:22 +07:00
23f7130ae4
update rtt to rev 25842
2023-06-07 00:07:58 +07:00
b3fda4a354
able to get usbpd irq handler
...
- handle cc1, cc2 voltage changes
- get order set, rx message end interrupt
- add segger rtt support for cmake
2023-06-06 23:55:33 +07:00
a70978e057
clean up
2023-06-05 19:53:40 +07:00
f6a45a7aab
clean up
2023-06-05 15:41:45 +07:00
268ab5863a
fix(RA Host Portable): git rid of the IAR warnings for packed
2023-06-02 14:14:57 +02:00
c7686f8d5e
Merge pull request #2092 from hathach/stm32g4
...
Stm32g4
2023-06-02 17:07:28 +07:00
2016ad72f3
fix iar ci
2023-06-02 16:21:49 +07:00
11fb837b51
fix ci
2023-06-02 16:15:26 +07:00
c2bc363f06
build g0 g4 iar cmake
2023-06-02 16:11:00 +07:00
bb795e6a5e
update cmake to build with IAR for g0 and g4
2023-06-02 15:26:16 +07:00
fcf7791454
add IAR support for G0 with cmake
2023-06-02 13:27:18 +07:00
e7090c7514
cmake refactor
2023-06-02 11:42:17 +07:00
ba3d71b615
fix usb clock for dpow1
2023-06-02 10:19:46 +07:00
002cb9289d
Merge pull request #2089 from DRNadler/master
...
Fix diagnostic format string (missing %u)
2023-06-01 22:56:18 +07:00
c3bde520cc
add new b_g474e_dpow1 board
2023-06-01 22:16:30 +07:00
70a92291fe
Fix diagnostic format string (missing %u)
2023-06-01 10:58:03 -04:00
cbbd858be4
Merge pull request #1942 from HubertD/feature/STM32G0
...
STM32G0 support
2023-06-01 21:34:39 +07:00
dc3afdbf3b
add note for B0 clock variant
2023-06-01 20:52:48 +07:00
c750030f7a
add freertosconfig for g0, add cmake stlink, add g0 to cmake ci
2023-06-01 17:09:00 +07:00
6280cba6e8
tested with g0b1 nucleo
2023-06-01 16:52:58 +07:00
6b44d8fb55
add cmake support for g0, exlicitly call HAL_Init() and also HAL_IncTick() in systick irq, fix button active state.
2023-06-01 15:58:02 +07:00
af59864ab5
Merge branch 'master' into feature/STM32G0
2023-06-01 13:28:28 +07:00
77714e02ca
Merge pull request #2088 from hathach/minor-cleanup
...
add lto for cmake
2023-06-01 13:22:09 +07:00
62b2d05d34
skip set CMAKE_EXECUTABLE_SUFFIX for espressif port
2023-06-01 12:50:32 +07:00
19a597bcae
add lto for cmake
2023-06-01 12:36:08 +07:00
ddc029ce54
Merge pull request #2016 from ipopov/master
...
Even when we get an empty "status change" interrupt from the hub, schedule another interrupt poll
2023-05-29 13:47:23 +07:00
20ef6c4ef7
slightly clean up
2023-05-29 13:29:11 +07:00
5c428d35a6
check status_change is not zero first
2023-05-29 13:27:20 +07:00
8ad024e51b
Even when we get an empty "status change" interrupt from the hub, schedule another interrupt poll.
...
During enumeration, when there are multiple devices attached to the
hub as it's plugged into the Pi Pico, enumeration hangs, because we
get a "status change" callback with value zero. With this patch, we
retry several times on "zero" status change callbacks, until
eventually we succeed.
This is the cheapo hub that exhibits this behavior, but I assume it's
not the only one: https://www.amazon.com/gp/product/B083RQMC7S .
While debugging this, I consulted the implementation in the Linux
kernel. There, hub setup explicitly checks each port individually,
before starting to depend on "status change" interrupts:
https://elixir.bootlin.com/linux/latest/source/drivers/usb/core/hub.c#L1133 .
We probably should do something like that here, but it's a much bigger
change.
2023-05-29 13:18:16 +07:00
acfaa4494f
Fixes bug in tuh_msc_ready
2023-05-28 15:40:01 +01:00
069e1ef84f
Merge pull request #2084 from hathach/more-build2
...
More build2
2023-05-26 20:23:25 +07:00
59ad5c59df
fix artifacts location
2023-05-26 18:58:21 +07:00
4bd02fb04d
more test
2023-05-26 18:54:14 +07:00
c88e7481be
retry hw test
2023-05-26 17:15:54 +07:00
7fb74a33a1
forgot to move hw test
2023-05-26 16:44:29 +07:00
7ac85d08c7
move lpc18 and rp2040 to cmake workflow since rp2040 often failed randomly with make
2023-05-26 16:37:47 +07:00
05cc342dfa
update deps, rename kinetis_k32 to k32l
2023-05-26 15:45:55 +07:00
hathach