48738df489
move LTO checked to family_support.cmake
2023-06-30 16:05:59 +07:00
e43387abac
rework cmake with rtos support add RTOS to family_configure_device/host/dual_example()
2023-06-27 15:45:38 +07:00
430f16bf76
move all IAR to cmake
2023-06-24 22:36:53 +07:00
2216704db8
rename GCC_CFLAGS to CFLAGS_GCC, GCC_SRC_S to SRC_S_GCC etc ..
2023-06-24 19:31:33 +07:00
dbf7534cd4
update all stm32 to use new enhance make
2023-06-24 18:09:05 +07:00
1b658ae109
add etm trace for mcb1800
...
clean up other ide setting
2023-06-20 13:12:12 +07:00
e754795d3a
fix build warnings
2023-06-16 15:29:34 +07:00
a7f330fa94
fix build, update freertos config for cmake
2023-06-16 14:17:25 +07:00
912802456b
move protocol message to stack, disable battery in PWR's CR3
...
there is still issue with CC1/CC2 pull down resistor and vstate is not
correct.
2023-06-09 18:15:28 +07:00
9c2a8490af
dma rx works well
2023-06-08 13:37:37 +07:00
b893f1d541
inital support for usb typec and pd example
2023-06-07 15:10:40 +07:00
914e82b25d
able to receive first PD message
2023-06-07 09:36:37 +07:00
e02eee7477
revert board flash latency to 8
2023-06-07 00:14:22 +07:00
b3fda4a354
able to get usbpd irq handler
...
- handle cc1, cc2 voltage changes
- get order set, rx message end interrupt
- add segger rtt support for cmake
2023-06-06 23:55:33 +07:00
a70978e057
clean up
2023-06-05 19:53:40 +07:00
f6a45a7aab
clean up
2023-06-05 15:41:45 +07:00
c2bc363f06
build g0 g4 iar cmake
2023-06-02 16:11:00 +07:00
bb795e6a5e
update cmake to build with IAR for g0 and g4
2023-06-02 15:26:16 +07:00
fcf7791454
add IAR support for G0 with cmake
2023-06-02 13:27:18 +07:00
e7090c7514
cmake refactor
2023-06-02 11:42:17 +07:00
ba3d71b615
fix usb clock for dpow1
2023-06-02 10:19:46 +07:00
c3bde520cc
add new b_g474e_dpow1 board
2023-06-01 22:16:30 +07:00
3623ba1884
fix trailing space and new line
...
temporarily disable codespell
2023-03-17 16:12:49 +07:00
6b84a29f8c
Merge pull request #1391 from perigoso/renesas-ra
...
Renesas ra family support
2023-03-17 11:28:54 +07:00
ffdffc7e06
rename FREERTOS_PORT to FREERTOS_PORTABLE_SRC
...
also fix trailing spaces
2023-03-16 23:11:11 +07:00
fabe86362b
fix HAL_Delay no effect bug on st platform
2023-03-16 08:28:19 +08:00
05e0205ad0
Merge branch 'master' into renesas-ra
2023-03-08 21:05:06 +07:00
9930863b41
fix iar ci
2023-03-06 12:45:47 +07:00
63a6fd3689
iar g4
2023-01-30 17:07:06 +07:00
43b255f413
more typos
2022-12-04 19:44:01 +07:00
6a2cf67289
Fix typos
2022-12-04 19:43:23 +07:00
835ab01cab
fix stm32 g4 and wb build issue with freertos, also add them to ci build
2022-06-24 21:52:51 +07:00
2a17a7e8f8
rework make freertos port handling
...
this allows ports to specify a freertos port outside the FreeRTOS-Kernel lib directory, which would otherwise not be possible
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
d097178ab0
correct wiring note
2021-12-13 17:59:43 +07:00
51acc3e1b9
update g4 bsp
2021-12-09 12:42:08 +07:00
cd76193f3c
try updating clock configure for g4 nucleo (not work yet)
2021-12-08 10:37:46 +07:00
310f287f44
couldn't get g4 usb clock and pin setup just yet. Leave it as it is for now
2021-11-04 17:52:55 +07:00
f90f5ea369
adding g4 family with g474nucleo, able to blink led and button
2021-11-04 16:16:51 +07:00
hathach