hathach
2c4a2e5b9e
rename TUSB_CFG_OS_TICKS_PER_SECOND to TUSB_CFG_TICKS_HZ
...
remove CFG_TICKS_PER_SECOND
2014-03-18 16:10:25 +07:00
hathach
fe1b39e539
remove hardfault handler
2014-03-17 17:32:28 +07:00
hathach
23aa7070df
refrator, replace osal_tick_get / osal_tick_tock by tusb_tick_get
2014-03-17 17:23:32 +07:00
hathach
d1d4ddd856
doxygen document
2014-03-16 22:20:33 +07:00
hathach
f28746f28a
more warning clean up
2014-03-14 15:16:45 +07:00
hathach
f1692c93ac
fix some warnings
2014-03-13 18:11:59 +07:00
hathach
9ba209cda0
IAR line ending warning
2014-03-12 14:10:38 +07:00
hathach
8f03dea95a
fix iar warning
2014-03-12 14:03:17 +07:00
hathach
a1978e20fe
merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h
2014-02-28 15:50:04 +07:00
hathach
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
hathach
8f70a6a886
change endian conversion to native to be & be to native
...
completely deferred xfer isr event to usbd task
complete read10, write10 sequence for large data transfer
2013-11-26 13:15:40 +07:00
hathach
c303154b7a
add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app
2013-11-21 13:54:29 +07:00
hathach
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
hathach
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
hathach
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
hathach
0d9e1163df
fix osal_none timeout, instant return with OSAL_TIMEOUT_NOTIMEOUT
2013-10-27 16:48:09 +07:00
hathach
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
61c591b9ac
clean up warnings
2013-09-18 23:34:03 +07:00
hathach
e32e901cd1
increase usb transaction time-out as host_cmsis_rtx easily timeouted
2013-09-14 00:00:05 +07:00
hathach
0d279facbb
fix cmsis rtx tick configuration
...
everything should work
TODO: remove static for variable error in control xfer subtask
2013-09-13 23:32:07 +07:00
hathach
67453b89f0
fix task def with cmsis rtx
2013-09-13 23:01:43 +07:00
hathach
ad0ef2e266
all project can run ok
2013-09-13 22:30:11 +07:00
hathach
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
hathach
14a8e26697
able to get blinky + greeting
2013-09-10 10:43:24 +07:00
hathach
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
hathach
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
hathach
97cbb39f6f
port osal_mutex to freeRTOS, able to mount mouse & cdc device
...
tinyusb host stack overflow though
2013-07-04 13:24:54 +07:00
hathach
a943cce991
test refractor
2013-06-29 21:00:33 +07:00
hathach
9e607f6dee
add SUBTASK_EXIT in osal.h for TDD project
2013-06-29 16:20:24 +07:00
hathach
a07ff5a3ce
use SUBTASK_EXIT to restart & exit task without "assert"
2013-06-27 16:32:54 +07:00
hathach
3bca56665c
add mutex support for osal
...
add test for mutex in test_osal_none.c
implement usbh_control_xfer using mutex to get access to queue xfer on control pipe
(while semaphore is used to sync with hcd DMA)
failed to issue control xfer: set idle & get report descriptor in hidh_open_subtask (more to work on)
2013-06-27 16:19:22 +07:00
hathach
c81c4bb817
add set idle request for hidh_open_subtask
...
add interface number to hidh_interface_info_t
refractor hidh_open_subtask to be a true subtask
cannot run with set idle code ON because of semaphore misuse
2013-06-27 03:20:14 +07:00
hathach
d7ae21203c
fix issue with osal_none queue def
2013-05-21 17:57:21 +07:00
hathach
63add70139
test clean up
2013-05-09 12:49:52 +07:00
hathach
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
hathach
38172d3d3c
fix bug with osal_queue for freeRTOS
...
implement process mouser report to clarify mouse app task
2013-04-27 16:40:18 +07:00
hathach
8bd077fa5c
fix bug (wrong logic) with osal_task_delay in non OS configure
...
complete keyboard app with key state & event TODO handle & check for non-printable(control) keycode
add unit test for osal_task_delay for non OS
2013-04-27 00:24:15 +07:00
hathach
c0104b996e
implement hcd_port_speed_get
...
move port reset & speed detection from isr context to usbh enumeration task
- decrease time in isr significantly from 50 ms to 580us
fix bug with osal_task_delay for freeRTOS buil
2013-04-25 17:48:55 +07:00
hathach
3763e22c9a
change OSAL_TASK_DEF to decouple variable name with task name
...
implement osal_task_delay for freeRTOS & non_os
getting both no_os & freertos running with mouse + keyboard
2013-04-25 16:41:00 +07:00
hathach
92994c8192
add attribute warn unused result for osal_create_* function
...
taskify keyboard_app mouse_app & led_blinking
2013-04-25 11:55:24 +07:00
hathach
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
hathach
d4a2600ecc
- change OSAL_TASK_FUNCTION to have void* parameter (to be consistent with most popular RTOS)
...
- add new error enum TUSB_ERROR_OSAL_TASK_CREATE_FAILED
- move usbh_enumeration_task prototype to usbh.h
- change OSAL_SUBTASK_INVOKED_AND_WAIT behavior, will not "return" in calling task when subtask got error status.
calling task need to do that after the call
- osal_queue_receive signature from uint32_t* to void*
- implement osal_freertos.h for FreeRTOS 7.3 --> able to compile & build host_freertos
+ OSAL_TASK_FUNCTION
+ turn on FPU for M4 in both host_os_none & host_freertos (freertos requires FPU to be on to compile)
+ osal_task_create
+ OSAL_SUBTASK_INVOKED_AND_WAIT
+ SUBTASK_ASSERT
+ osal_semaphore_reset
+ osal_queue_flush
+ adding heap_1.c for memory management
2013-04-24 17:53:43 +07:00
hathach
574710dde5
move main work in usbh_enumeration_task to its body subtask for task_assert style
2013-04-24 13:45:42 +07:00
hathach
d312be7006
fix potential error with usbh_control_xfer_subtask in subtask_assert
...
change back to use task_assert style in usbh_enumeraion
change test to task->subtask->subtask style in test/test_osal_none.c
2013-04-24 12:20:56 +07:00
hathach
73d5f00a40
rename OSAL_TASK_DECLARE to OSAL_TASK_FUNCTION
...
removing TASK_ASSERT to avoid using goto/continue statement with rtos configure
2013-04-23 15:35:27 +07:00
hathach
357888a5e5
rename nxp_sof_received to nxp_int_sof
...
implementing freeRTOS integration
change get_period_frame_list from using lst_idx to hostid (fix bug)
adding polling interval supported for interrupt: 1ms, 2ms, 4ms, 8ms
- add interval_ms to get_period_head function
- add bInterval to qhd_init
- add support for sub-frame (less than 8 micro frames) interval
- add bunch of test for interrupt different intervals
2013-04-21 00:28:25 +07:00
hathach
a9010c1786
getting build with freertos & host demo
2013-04-16 16:48:19 +08:00
hathach
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data)
...
- support any size queue message (instead of fixed uint32_t)
2013-04-10 01:18:32 +07:00