b36b211c26
clean up tusb_fifo.h include
2021-05-27 17:58:42 +07:00
13de8f5d98
minor clean up
2021-05-10 19:15:46 +07:00
03f974c9b9
Implement functions to allow for DMA usage in audio driver.
...
- Add tud_audio_n_get_ep_out_ff(), tud_audio_n_get_ep_in_ff(),
tud_audio_n_get_rx_support_ff(), and tud_audio_n_get_tx_support_ff()
- Change get_linear_read/write_info() to return linear and wrapped part
at once
- Adjusted affected code in audio_device.c and tested with
audio_4_channel.
2021-04-23 10:27:48 +02:00
8d2dfe872c
revert dcd_edpt_xfer_fifo() implementation for stm32_fsdev
2021-04-05 19:19:49 +07:00
7b8a08d2e1
Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()
2021-03-02 20:00:39 +01:00
6cb9a6ebb1
Add (void *) for pointer cast.
2021-02-17 23:04:19 +01:00
666e0fad35
Fix wrong tu_fifo_read_n() call in dcd_stm32_fsdev.c
2021-02-17 22:50:49 +01:00
eee47493a3
Fix bug in evasion buffer list
2021-02-17 21:59:32 +01:00
2d7b61972c
Implement dcd_edpt_iso_xfer() for dcd_stm32_fsdev
...
Implemented a special copy strategy to copy directly from the FIFO. This
function, however, is untested and should be regarded as unreliable
until somebody was able to test it
2021-02-17 20:46:31 +01:00
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
f914e48d25
Dynamically check STM32F3 IRQ remap option
2020-10-10 05:02:37 +02:00
020ad47bb0
stm32: fix ISTR and CTR_RX/TX race conditions
2020-10-06 14:43:10 -07:00
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com>
2020-06-18 14:18:00 +02:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
b0270f499b
stm32fsdev: dynamic allocation of PMA.
2020-04-15 11:53:30 -04:00
16f65890eb
Merge branch 'master' into edpt_close
2020-04-14 10:22:03 -04:00
bbc59f1ceb
stm32fsdev: add static assert for PMA size bigger than EP0 size.
2020-04-13 20:50:17 -04:00
f8e7487355
edpt_close: Updated based on feedback.
2020-04-13 09:51:46 -04:00
0eeaccaf46
Skeleton, and initial stm32fsdev implementation (that leaks memory)
2020-04-12 21:27:27 -04:00
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
5bd9d14fc1
stm32fsdev: set dcd_connect API definitions to strong, Modify documentation.
2020-04-10 10:26:41 -04:00
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
9d96b6d66e
Update dcd_stm32_fsdev.c
...
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
988edce745
fix build
2019-12-09 18:49:38 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
820a3705f5
Merge branch 'master' into develop
2019-10-02 12:13:47 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
1e193212d7
Add testcase for EP0 stall recovery to USBTMC test script.
2019-10-02 00:31:47 -04:00
e5f38e3e86
Remove references to EP kind.
2019-10-02 00:11:16 -04:00
838cfe02c1
Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0
2019-10-02 00:09:07 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
f19082f02d
Reset TX and RX endpoints to NAK when receiving setup packet.
2019-09-25 20:55:15 -04:00
048e0448c0
ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar.
2019-09-25 20:54:59 -04:00
ce9f133d25
FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos.
2019-09-21 12:00:04 -04:00
94c9cf0eff
doc update
2019-09-20 16:14:35 +07:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
525b4cdb72
Use ESOF for wakeup timing.
2019-09-19 09:51:40 -04:00
85623584f9
Remove debug assertions.
2019-09-19 09:24:52 -04:00
89ffe78f84
ST FSDEV: No need to always reset the interrupt priority, also add some synchronization primitives after disabling interrupts.
2019-09-16 22:56:17 -04:00
a33a854793
Include board header file... :X
2019-09-16 20:56:57 -04:00
hathach