7abafbb1bd
Merge pull request #807 from UweBonnes/lpc55-port1-hs
...
mcu-link: Board support for MCU-LINK with LPC55S69JBD64
2021-04-26 20:28:47 +07:00
ba90a8cb79
use correct NBYTES_MAX for full and high speed
2021-04-26 20:22:40 +07:00
fd7337fe04
mcu_link: Board support for MCU_LINK with LPC55S69JBD64
2021-04-26 10:26:46 +02:00
8ebdf2b097
ip3511 correct buffer offset, nbytes layout for highspeed port1
...
able to get passed enumeration and up to READ10
2021-04-26 14:43:58 +07:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
7089df2088
lpc55 correct bus_reset with highspeed on support controller
...
correct hsphy init for family
2021-04-24 12:19:13 +07:00
8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
5c5d4b189f
add lpc55 uart write
2021-04-22 19:24:19 +07:00
a2be6c1472
correct boot stage2 for itsybitsy and qt rp2040
2021-04-19 14:03:29 +07:00
01801c881b
Merge pull request #783 from alisitsyn/esp-based_on_334e95f
...
WIP: Add new Espressif target esp32s3 for tinyUSB
2021-04-19 13:01:50 +07:00
faae19f560
update ci build
2021-04-18 15:44:50 +07:00
0517377dcb
add stm32f072eval to group
2021-04-18 15:44:34 +07:00
4c8750badb
add f070 nucleo to group
2021-04-18 14:26:07 +07:00
a5b406da51
create stm32f0 group
2021-04-18 13:24:34 +07:00
9fceed39fc
When used with FreeRTOS, lower the interrupt priority for OTG_FS_IRQn
2021-04-17 23:43:03 +01:00
38cc459c93
Merge branch 'master' into alisitsyn-esp-based_on_334e95f
2021-04-18 01:30:19 +07:00
70c89da7ba
Change LED_STATE_ON to 0 for f401 and f411 blackpill boards
2021-04-16 15:51:19 +01:00
f5e02e72ed
espressif: group boards using target name as a family
...
`hw\bsp` separate one family folder to esp32s2, esp32s3
add board specific board.cmake file to override board specific options(features)
fix examples and test scripts to use new family approach
2021-04-16 15:41:42 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
62a0d5b42d
Changed LED_PIN to 17, LED_STATE_ON to 0
2021-04-15 16:12:19 +01:00
c8bb0020ea
update rp2040 to use pico-sdk externally
...
also try to update ci
2021-04-11 13:37:07 +07:00
bebc910447
remove pico-sdk as submodule
2021-04-11 13:19:51 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
65a04f02b6
add sltb009a bsp
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-31 23:45:33 +01:00
ff2978d95f
added comments for JLink connection work.
2021-03-31 22:15:03 +09:00
25057022e3
add a submodule of Renesas RX family to `hw/mcu/renesas/rx`
2021-03-31 21:53:15 +09:00
74c8887c8e
removed a submodule for Renesas
2021-03-31 21:50:53 +09:00
5a0c594c71
move rx63n into its own family
2021-03-29 23:54:44 +07:00
30687daf9b
added a submodule dependency
2021-03-28 16:45:53 +09:00
0e0f9a8da3
added a submodule for RX63N
2021-03-28 00:46:08 +09:00
0b76a2da88
added a setting for RX63X
2021-03-28 00:34:29 +09:00
5f4e6dafc5
added short-enums into CFLAGS
2021-03-28 00:10:53 +09:00
4c832a9195
Set newlib as the default library
2021-03-27 22:21:47 +09:00
eab214e07c
added settings for LWIP and FreeRTOS
2021-03-27 19:12:34 +09:00
e48b2c681e
fixed definitions for stack areas
2021-03-27 16:00:56 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
18be454011
added board files
2021-03-26 19:30:53 +09:00
fb661a99bd
added efm32gg12 family cmsis
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 19:00:50 +00:00
143582870c
add efm32gg12 family
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 18:59:21 +00:00
8e6f298aa1
Merge upstream TinyUSB master
2021-03-21 09:53:57 +01:00
1f9b7b0c48
SAM54 Xplained Pro: update board setup documentation
2021-03-21 09:48:49 +01:00
1a5a113655
SAM54 Xplained Pro: reduce board setup code for maintenance
...
The board now runs off the internal oscillator at 48 MHz.
This is sufficient to run the TinyUSB examples.
A better performing clock setup is keep in the file as init_clock_xtal()
as an example.
2021-03-21 09:43:29 +01:00
a2006ce214
SAM 54 Xplained Pro: remove board specific define
2021-03-21 09:38:02 +01:00
5e74a7b548
Fixed case in linker script name
2021-03-19 12:27:44 -07:00
2f6f931553
Removed asserts
2021-03-19 12:12:09 -07:00
aa54135087
Initial commit; copied from stmf072-disco and modified for -EVAL board
2021-03-19 10:57:58 -07:00
249852d25c
use boot2_generic_03h for adafruit feather rp2040
...
- also use boot2_generic_03h for now for itsy bitsy and qt rp2040
- change default flash target for rp2040 to flash-pyocd
2021-03-18 19:53:39 +07:00
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
b221cedf80
spaces
2021-03-17 21:36:52 +07:00
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
01ec0d49ca
SAM E54 XPlained Pro: use proper defines SPI->USART for board init
2021-03-13 14:51:16 +01:00
bcf9c8cb27
SAM E54 XPlained Pro: free up DPLL1 for application
2021-03-13 14:50:55 +01:00
1cdd1b0209
Update pico sdk 1.1.0 ( #712 )
...
* update pico-sdk to 1.1.0
also correct fetch_submodule_if_empty behavior
2021-03-10 13:26:14 +07:00
7afe1d9e16
clean up
...
some how lpc55 ci cannot build without pre-checkout lib/sct_neopixel
2021-03-05 22:49:29 +07:00
ca6abea97d
nrf add lib/CMSIS_5 to DEPS_SUBMODULES
2021-03-05 22:30:03 +07:00
7d877e286a
update DEPS_SUBMODULES to optimize ci
2021-03-05 22:24:03 +07:00
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
b846ded487
merge no-family example build
...
specify FAMILY_SUBMODULES for all boards
2021-03-04 22:50:45 +07:00
8cabbb28df
fix enum walkaround forever check for SE0 when pull up is disabled
2021-03-04 18:36:18 +07:00
16f501a14e
clean up
2021-03-03 20:25:44 +07:00
5d226ee733
add h745disco to family group
2021-03-03 20:22:55 +07:00
5799c471f1
group h743eval and h743nucleo into stm32h7
...
tested and work well
2021-03-03 20:07:17 +07:00
e1966f8d91
mcb1800 and lpc18s37 work well with both device and host demo
2021-03-03 17:29:30 +07:00
0dc1a3d3af
add lpc18 family
2021-03-03 16:03:21 +07:00
d91979cfef
rp2040 able to get log with rtt
...
add note for segger rtt block search range
2021-03-02 23:18:44 +07:00
ce942baad2
update pico-sdk to more recent commit
...
- move target_link_libraries() to family.cmake
- enable pico_bootsel_via_double_reset
2021-03-02 22:57:33 +07:00
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
b066fdc2c6
move fomu to its own family, update ci with build risv
2021-03-02 12:24:12 +07:00
71313d934d
update ci for msp430 family
2021-03-02 11:50:57 +07:00
a2366fce53
move msp430 into family
2021-03-02 11:08:44 +07:00
c34b6b2324
remove lib/CMSIS_4 submodule, move nrf to lib/CMSIS_5
2021-03-02 01:18:34 +07:00
76b4b3f827
fix ci build for same board
2021-03-01 21:54:57 +07:00
26d9897551
update microchip_driver
2021-03-01 21:24:11 +07:00
9bc921b342
update family submodule
...
temporarily disable other orphaned and esp32s2 build
2021-03-01 20:48:30 +07:00
c222f6f111
try to fetch needed mcu submodule while running make
2021-03-01 20:25:55 +07:00
e9059b5d84
added lpcxpresso 55s28
2021-03-01 12:31:31 +07:00
2e42858537
move lpc55 into its own family
2021-03-01 00:39:48 +07:00
7d9cddccd2
SAM E54 Xplained Pro: applies reviewer feedback
2021-02-28 08:14:17 +01:00
d2575009a1
SAM 54 Xplained Pro: fix inverted logic for board led
2021-02-28 06:19:25 +01:00
fa8c7bc334
fix indent
2021-02-26 14:08:57 +07:00
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
1dbbfdfe45
clean up
2021-02-24 12:34:23 +07:00
ebc6253bd4
rt1011 msc host work
2021-02-23 10:20:11 +07:00
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
16c8f75637
Adds support for Microchip SAM E54 Xplained Pro
2021-02-20 16:00:27 +01:00
be9f86ca9e
Merge pull request #660 from hathach/fix-typo-midi-write24
...
Fix typo midi write24
2021-02-19 11:22:21 +07:00
c245305f72
update adafruit rp2040 board define
2021-02-19 10:50:50 +07:00
2145ab7664
rp2040/family.c: allow LED_PIN to be undefined
2021-02-18 11:53:18 +00:00
1b678eccf5
add basic support for rt-thread
2021-02-08 20:46:49 +08:00
2997e78da3
bsp: rename SAMD21 LUNA variant to luna_d21
...
We now have SAMD21 and SAMD11 variants of LUNA; so we'll rename the
existing LUNA BSP to be more specific / reflect its version.
2021-02-03 13:35:07 -07:00
6f02e5f1f8
add BSP for SAMD11 variant of Great Scott Gadgets' LUNA boards (SAMD11)
2021-02-03 13:33:40 -07:00
b739c5a837
added pyportal
2021-02-03 13:19:34 +07:00
d24c702b63
add pybadge
...
also correct other samd51 tx,rx pin (not used yet)
2021-02-03 13:12:02 +07:00
4153d9e1b6
update pico-sdk to 1.0.1
2021-02-03 12:39:30 +07:00
8d973a36ed
add adafruit esp32s2 boards
...
- metro esp32s2
- feather esp32s2
- magtag 29" gray
2021-02-01 15:16:38 +07:00
8e954a4391
added enumerate walkaround for RP2040-E5
...
- PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
- target linke pico_fix_rp2040_usb_device_enumeration
2021-02-01 13:37:37 +07:00
ba69da1d8f
add support for LOG=2
...
LOGGER=rtt is not tested since jlink doesn't support rp2040 just yet
2021-01-29 11:24:05 +07:00
4fef2ddb4c
rp2040 move uart id to board specific
2021-01-27 16:37:31 +07:00
e230d683ca
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
Ha Thach