hathach
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
hathach
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
hathach
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
MasterPhi
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
MasterPhi
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
MasterPhi
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
kkitayam
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
Mengsk
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
hathach
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
hathach
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
hathach
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
kkitayam
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
kkitayam
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
Ha Thach
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
Ha Thach
5f141a4c13
Merge pull request #1077 from hathach/st-synopsy-compliance
...
St synopsy compliance
2021-09-08 18:00:44 +07:00
hathach
d077574097
reset PID to DATA0 when open endpoint
2021-09-08 17:56:22 +07:00
hathach
67e80f60e3
fix build with gd32vf103
2021-09-08 13:35:11 +07:00
hathach
4ac136d81d
implement remote wakeup for stm synopsys
2021-09-08 00:57:07 +07:00
hathach
a54a974fa5
make synopsys usbcv compliance
...
- implement dcd_edpt_close_all()
- reset dtoggle when open endpoint
- correct dev interrupt mask on bus reset
2021-09-07 23:02:57 +07:00
kkitayam
f3da48d46a
Implement dcd_edpt_close_all() for Renesas RX family
2021-09-07 23:28:54 +09:00
hathach
d6e9fe38be
rp2040 implement dcd_edpt_close_all()
...
aslo rename reset_ep0_pid() and clean up. We only need to reset pid when
setup packet received
2021-09-01 19:44:12 +07:00
hathach
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
hathach
ab0c3e8dd0
fix rp2040 chapter 9 TD 9.6 test
2021-08-31 17:41:08 +07:00
MasterPhi
16b802d50c
add dcd_edpt_close and iso xfer.
2021-08-31 12:02:19 +02:00
MasterPhi
864d8381a7
dcd_transmission xfer_fifo support.
2021-08-31 11:59:51 +02:00
hathach
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
hathach
ad21b69277
fix nrf clear data toggle sequence when clearing stall
2021-08-29 12:05:34 +07:00
hathach
66c292e2ec
fix a couple of nrf dcd issue
...
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
2021-08-29 00:34:21 +07:00
hathach
8bad0af849
explicitly clear stall and data toggle for edpoint upon open()
2021-08-27 22:31:08 +07:00
hathach
81c73c235f
implement dcd_edpt_close_all() for nrf52840
2021-08-27 22:30:30 +07:00
hathach
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
hathach
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
Ha Thach
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
Greg Steiert
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
hathach
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
hathach
3309425211
sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB
...
separate dev0 from _usbh_devices pool to save sram
2021-08-23 19:56:53 +07:00
hathach
75cd593b60
add hcd_devtree_get_info()
...
remove usbh_hcd.h
2021-08-23 17:00:41 +07:00
hathach
a490a3fe61
add hcd attr, add note for ehci framelist on NXP derivative
2021-08-23 15:40:57 +07:00
hathach
4ca176c291
refactor ehci init api
2021-08-23 12:37:54 +07:00
hathach
6a16f6ccdd
rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
2021-08-23 11:01:40 +07:00
MasterPhi
69e539fda4
Fix CI.
2021-08-21 12:11:35 +02:00
MasterPhi
e20755442a
nuc126: fix set_address & disable sof
2021-08-21 12:04:02 +02:00
kkitayam
ff59e98a6a
Add compile switch to enable SOF during suspend only
2021-08-19 23:57:34 +09:00
kkitayam
351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
Ha Thach
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
Ha Thach
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
hathach
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
Mengsk
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
hathach
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
hathach
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
Ha Thach
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
hathach
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
hathach
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
Tobias Ringström
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
hathach
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
hathach
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
Jerzy Kasenberg
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
hathach
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
hathach
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
hathach
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
hathach
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
hathach
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
Jerzy Kasenberg
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
Robert Manzke
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
Stefan Kerkmann
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
Stefan Kerkmann
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
Ha Thach
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
MasterPhi
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
Stefan Kerkmann
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
Stefan Kerkmann
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
kkitayam
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
MasterPhi
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
MasterPhi
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
kkitayam
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
kkitayam
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
kkitayam
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
hathach
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
hathach
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
hathach
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
hathach
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
hathach
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
Ha Thach
c737aa6fbb
Merge pull request #693 from HiFiPhile/dcd_same70
...
SAMx7x (E70, S70, V70, V71) DCD Support
2021-07-22 00:07:33 +07:00
MasterPhi
8c6cd5396c
Fix non-DMA IN irq.
2021-07-21 10:50:07 +02:00
MasterPhi
5492d9148c
Re-enable SETUP irq on EP0 stall.
2021-07-21 10:29:47 +02:00
MasterPhi
9c26c0c01e
Remove redundant TX irq.
2021-07-21 09:42:26 +02:00
MasterPhi
eec927ea95
Fix EP0 issue (again)
2021-07-21 00:28:51 +02:00
MasterPhi
fa9a327a71
Workaround of EP0 issue, clean up.
2021-07-20 13:24:39 +02:00
MasterPhi
895c913aa9
Merge branch 'dcd_same70' of https://github.com/HiFiPhile/tinyusb into dcd_same70
2021-07-19 22:04:34 +02:00
MasterPhi
75f61328ea
Remove clock init.
2021-07-19 22:03:47 +02:00
Ben Evans
cee980c598
Fix for dcd_synopsys driver integer overflow in HS mode (issue #968 ).
2021-07-19 17:45:12 +10:00
hathach
05f59fb8ed
clean up warning
2021-07-19 12:08:01 +07:00
MasterPhi
8cae17bfc8
Fixing NAKed OUT xfer
2021-07-19 01:07:33 +02:00
MasterPhi
bae0d3b7bb
Fix build error.
2021-07-17 14:42:23 +02:00
MasterPhi
7e3e41952f
Fix ISO support.
2021-07-17 13:48:21 +02:00
HiFiPhile
b194aa240b
Merge branch 'master' into dcd_same70
2021-07-17 12:10:35 +02:00
kkitayam
1ff3b76451
remove unnecessary blocking operation.
...
add comments why resume event is sent manually.
2021-07-05 21:27:08 +09:00
kkitayam
3019c6eb40
Add SUSPEND/RESUME handling for Renesas RX family.
2021-07-03 23:35:58 +09:00
Wini-Buh
4c0cce4b1d
Make toolchain dependency more consistent
2021-06-29 21:45:18 +02:00
Wini-Buh
36ba9608bd
Merge from current master. Fixed a compilation error with the GNUC toolchain
2021-06-29 00:43:41 +02:00
Wini-Buh
cb0f1d98db
Merge remote-tracking branch 'origin/master' into CCRX_Port
...
# Conflicts:
# src/portable/renesas/usba/dcd_usba.c
# src/tusb_option.h
2021-06-29 00:19:30 +02:00