fd69cc3dcc
clean up
...
renaming function and variables
changing indent size
2020-05-04 07:59:13 +02:00
59ff208c65
Changed switch into if statements
2020-04-29 12:37:29 +02:00
3e6feb7f6d
Redesign of Synopsys device transmission
...
Changes:
- checking if tx buffer empty interrupt is masked
- process more than one packet in isr
- mask tx buffer empty just after all bytes were written
- use of transmit_fifo_packet instead of transmit_packet
2020-04-29 11:32:22 +02:00
958b5510cb
added comment for hw clearing TXFE
2020-04-27 13:17:47 +07:00
e785b09118
TXFE is read only bit
2020-04-27 12:06:14 +07:00
8d18d6077b
turn off TX FIFO Empty for EPIN if all bytes are written
...
fix dcd synopsys issue with usbnet #289
2020-04-26 22:14:59 +07:00
b949ae596f
synopsys: Reduce interrupt time for IN ZLP
...
For IN endpoints output FIFO is filled in interrupt, therefor before
endpoint is enabled, DIEPTSIZ is set with correct size of packet.
Then endpoint is enabled and FIFO empty interrupt is enabled.
This works fine except for the ZLP. Enabling FIFO empty interrupt
results in interrupt handler being called all the time because
there is nothing to put in the FIFO.
Eventually it ends when IN token is received and empty
packed is transmitted out.
This change does not enable FIFO empty interrupt for ZLP reducing
CPU load.
2020-04-24 17:38:30 +02:00
551724498a
Added support for STM32F1 Connectivity Line MCU
...
STM32F105 and STM32F107 are using the Synopsys IP
2020-04-22 17:39:53 +02:00
1f442c0a9a
also add wakeup event
2020-04-18 23:48:36 +07:00
fa71402e17
implement disconnection detection for stm32 synopsys
...
- disconnection is OTG INT session end bit
- add USE_SOF to disable 1ms interrupt on mcu which isn't used now by
the stack
- add suspend detection
2020-04-18 23:40:27 +07:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
19e2eb66c0
Merge pull request #350 from hathach/synopsys-msp430-dcd-disconnect-connect
...
Synopsys msp430 dcd disconnect connect
2020-04-17 09:51:15 +07:00
4c74140b31
stm32 sysnopsys disconnect/connect
2020-04-16 20:20:20 +07:00
b0270f499b
stm32fsdev: dynamic allocation of PMA.
2020-04-15 11:53:30 -04:00
16f65890eb
Merge branch 'master' into edpt_close
2020-04-14 10:22:03 -04:00
bbc59f1ceb
stm32fsdev: add static assert for PMA size bigger than EP0 size.
2020-04-13 20:50:17 -04:00
f8e7487355
edpt_close: Updated based on feedback.
2020-04-13 09:51:46 -04:00
0eeaccaf46
Skeleton, and initial stm32fsdev implementation (that leaks memory)
2020-04-12 21:27:27 -04:00
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
5bd9d14fc1
stm32fsdev: set dcd_connect API definitions to strong, Modify documentation.
2020-04-10 10:26:41 -04:00
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
7a05b177a4
Merge pull request #236 from jeremyherbert/master
...
Update dcd_stm32_fsdev.c with note about F042Fx remapping
2019-12-12 10:17:40 +07:00
9d96b6d66e
Update dcd_stm32_fsdev.c
...
Add a note about pin remapping for the STM32F042Fx
2019-12-12 09:40:06 +10:00
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
988edce745
fix build
2019-12-09 18:49:38 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
820a3705f5
Merge branch 'master' into develop
2019-10-02 12:13:47 +07:00
0673be7724
ported stm32f1, tested with f103 blue pill
2019-10-02 12:01:34 +07:00
1e193212d7
Add testcase for EP0 stall recovery to USBTMC test script.
2019-10-02 00:31:47 -04:00
e5f38e3e86
Remove references to EP kind.
2019-10-02 00:11:16 -04:00
838cfe02c1
Merge remote-tracking branch 'origin/master' into ST_FSDEV_EP0
2019-10-02 00:09:07 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
f19082f02d
Reset TX and RX endpoints to NAK when receiving setup packet.
2019-09-25 20:55:15 -04:00
048e0448c0
ST FSDEV:Remove setting the EP kind, as I think it was causing issues during enumeration (sometimes). Also move a membar.
2019-09-25 20:54:59 -04:00
7ba8e81852
Merge pull request #177 from cr1901/fifo-fix
...
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-22 11:38:54 +07:00
108f756e22
dcd_synopsys: Fix off-by-one error in FIFO allocation.
2019-09-21 23:01:06 -04:00
ce9f133d25
FSDEV: go to NAK when unstalling; on reset, set EP0 to NAK, prioritize reset interrupt, fix small typos.
2019-09-21 12:00:04 -04:00
94c9cf0eff
doc update
2019-09-20 16:14:35 +07:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
525b4cdb72
Use ESOF for wakeup timing.
2019-09-19 09:51:40 -04:00
642afeea8b
s/static const/define/
2019-09-19 09:30:16 -04:00
85623584f9
Remove debug assertions.
2019-09-19 09:24:52 -04:00
Jan Dümpelmann