0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
5ca748a68e
rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
...
rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
2020-07-16 15:34:16 +07:00
fea6fb73a1
add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun
2020-07-16 13:04:10 +07:00
ed065691ef
fix unintended changes to webusb example
2020-07-16 00:55:19 +07:00
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
e1b3fe81c4
Merge pull request #461 from CraigHutchinson/patch-1
...
Improve comment on CDC tud_cdc_write_available()
2020-07-10 18:51:50 +07:00
323ae5a84f
Improve comment on CDC tud_cdc_write_available()
...
Fixes #460
2020-07-10 12:24:09 +01:00
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
dbced9911d
Merge pull request #447 from hathach/add-stm-hs
...
Add support for STM32 OTG HS core
2020-07-08 19:47:24 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
f82655a212
correct EP Size for cdc dual and webusb example
2020-07-06 18:55:31 +07:00
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
961d813953
Merge pull request #455 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 23:52:27 +07:00
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
0c9932440b
Merge pull request #452 from hathach/fix-dfu-rt
...
Fix dfu rt
2020-07-01 15:24:39 +07:00
ea67aee75b
Update README.md
2020-07-01 13:19:06 +07:00
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
383f8047a5
Merge pull request #453 from hathach/add-da14695-usb
...
Add da14695 usb
2020-07-01 13:02:16 +07:00
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
12a145b27d
fix dfu-rt to response to SET_INTERFACE and DFU_GETSTATUS
...
fix #450
2020-07-01 01:33:02 +07:00
e4391c32a6
Merge pull request #451 from duempel/fix_synopsys_short_packet
...
Fix receiving of short packet data (Synopsys)
2020-07-01 00:11:21 +07:00
400c2d2e50
correct led dfu_rt example
...
also add example usage note
2020-06-30 23:26:51 +07:00
378e6aab8c
Clear ep0_pending if rx short packet
2020-06-30 17:56:25 +02:00
9e35ef73f7
Fix receiving of short packet data (ep out)
2020-06-30 12:55:39 +02:00
0477446224
more clean up
2020-06-30 16:31:59 +07:00
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
62239bb576
cdc-acm: Use 512 bytes when in HS mode.
...
Removes error:
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
while enumerationg.
2020-06-30 11:02:41 +02:00
05bfd9ac4a
dcd_synopsys: Handle HS and FS IP in one device
...
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file
F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
2020-06-30 11:02:41 +02:00
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
hathach