kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #811 from hathach/update-lpc54 

Update lpc54
This commit is contained in:
Ha Thach 2021-04-29 00:44:54 +07:00 committed by GitHub
parent 33f713f5ef e70fb7fd41
commit 30b7988efa
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
33 changed files with 387 additions and 146 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.github/workflows/build.yml vendored
View File

@ -43,6 +43,7 @@ jobs:
- 'imxrt'
- 'lpc15'
- 'lpc18'
- 'lpc54'
- 'lpc55'
- 'nrf'
- 'rp2040'

12
.gitmodules vendored
View File

@ -10,9 +10,6 @@
[submodule "hw/mcu/ti"]
path = hw/mcu/ti
url = https://github.com/hathach/ti_driver.git
[submodule "hw/mcu/nxp"]
path = hw/mcu/nxp
url = https://github.com/hathach/nxp_driver.git
[submodule "hw/mcu/microchip"]
path = hw/mcu/microchip
url = https://github.com/hathach/microchip_driver.git
@ -115,3 +112,12 @@
[submodule "hw/mcu/renesas/rx"]
path = hw/mcu/renesas/rx
url = https://github.com/kkitayam/rx_device.git
[submodule "hw/mcu/nxp/lpcopen"]
path = hw/mcu/nxp/lpcopen
url = https://github.com/hathach/nxp_lpcopen.git
[submodule "hw/mcu/nxp/mcux-sdk"]
path = hw/mcu/nxp/mcux-sdk
url = https://github.com/NXPmicro/mcux-sdk.git
[submodule "hw/mcu/nxp/nxp_sdk"]
path = hw/mcu/nxp/nxp_sdk
url = https://github.com/hathach/nxp_sdk.git

2
hw/bsp/ea4088qs/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

2
hw/bsp/ea4357/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

7
hw/bsp/frdm_kl25z/board.mk
View File

@ -1,4 +1,5 @@
DEPS_SUBMODULES += hw/mcu/nxp
SDK_DIR = hw/mcu/nxp/nxp_sdk
DEPS_SUBMODULES += $(SDK_DIR)
CFLAGS += \
-mthumb \
@ -10,7 +11,7 @@ CFLAGS += \
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MKL25Z4
MCU_DIR = $(SDK_DIR)/devices/MKL25Z4
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld
@ -25,7 +26,7 @@ SRC_C += \
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(SDK_DIR)/CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \

13
hw/bsp/imxrt/family.c
View File

@ -79,7 +79,18 @@ void board_init(void)
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
uint32_t freq;
if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */
{
freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
}
else
{
freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
}
LPUART_Init(UART_PORT, &uart_config, freq);
//------------- USB0 -------------//

16
hw/bsp/imxrt/family.mk
View File

@ -1,5 +1,6 @@
UF2_FAMILY_ID = 0x4fb2d5bd
DEPS_SUBMODULES += hw/mcu/nxp
SDK_DIR = hw/mcu/nxp/mcux-sdk
DEPS_SUBMODULES += $(SDK_DIR)
include $(TOP)/$(BOARD_PATH)/board.mk
@ -17,7 +18,7 @@ CFLAGS += \
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough=
MCU_DIR = hw/mcu/nxp/sdk/devices/$(MCU_VARIANT)
MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT)
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld
@ -32,16 +33,19 @@ SRC_C += \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
$(SDK_DIR)/drivers/common/fsl_common.c \
$(SDK_DIR)/drivers/igpio/fsl_gpio.c \
$(SDK_DIR)/drivers/lpuart/fsl_lpuart.c
INC += \
$(TOP)/$(BOARD_PATH) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(SDK_DIR)/drivers/common \
$(TOP)/$(SDK_DIR)/drivers/igpio \
$(TOP)/$(SDK_DIR)/drivers/lpuart
SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S

2
hw/bsp/lpc15/family.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
include $(TOP)/$(BOARD_PATH)/board.mk

2
hw/bsp/lpc18/family.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
include $(TOP)/$(BOARD_PATH)/board.mk

59
hw/bsp/lpc54/boards/lpcxpresso54114/board.h Normal file
View File

@ -0,0 +1,59 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2021, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
#ifdef __cplusplus
extern "C" {
#endif
// LED
#define LED_PORT 0
#define LED_PIN 29
#define LED_STATE_ON 0
// WAKE button
#define BUTTON_PORT 0
#define BUTTON_PIN 24
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_DEV USART0
#define UART_RX_PINMUX 0, 0, IOCON_PIO_DIG_FUNC1_EN
#define UART_TX_PINMUX 0, 1, IOCON_PIO_DIG_FUNC1_EN
// USB0 VBUS
#define USB0_VBUS_PINMUX 1, 6, IOCON_PIO_DIG_FUNC7_EN
// XTAL
//#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
#ifdef __cplusplus
}
#endif
#endif

13
hw/bsp/lpc54/boards/lpcxpresso54114/board.mk Normal file
View File

@ -0,0 +1,13 @@
MCU_VARIANT = LPC54114
MCU_CORE = LPC54114_cm4
CFLAGS += -DCPU_LPC54114J256BD64_cm4
LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld
LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_cm4_hardabi.a
JLINK_DEVICE = LPC54114J256_M4
PYOCD_TARGET = LPC54114
# flash using pyocd
flash: flash-pyocd

59
hw/bsp/lpc54/boards/lpcxpresso54628/board.h Normal file
View File

@ -0,0 +1,59 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2021, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
#ifdef __cplusplus
extern "C" {
#endif
// LED
#define LED_PORT 2
#define LED_PIN 2
#define LED_STATE_ON 0
// WAKE button
#define BUTTON_PORT 1
#define BUTTON_PIN 1
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_DEV USART0
#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN
#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN
// USB0 VBUS
#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN
// XTAL
//#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
#ifdef __cplusplus
}
#endif
#endif

18
hw/bsp/lpc54/boards/lpcxpresso54628/board.mk Normal file
View File

@ -0,0 +1,18 @@
MCU_VARIANT = LPC54628
MCU_CORE = LPC54628
PORT ?= 0
CFLAGS += -DCPU_LPC54628J512ET180
CFLAGS += -Wno-error=double-promotion
LD_FILE = $(MCU_DIR)/gcc/LPC54628J512_flash.ld
LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a
JLINK_DEVICE = LPC54628J512
PYOCD_TARGET = LPC54628
#flash: flash-pyocd
flash: flash-jlink

132
hw/bsp/lpcxpresso54114/lpcxpresso54114.c → hw/bsp/lpc54/family.c
View File

@ -24,11 +24,36 @@
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_power.h"
#include "fsl_iocon.h"
#include "fsl_usart.h"
#include "bsp/board.h"
#include "board.h"
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
// IOCON pin mux
#define IOCON_PIO_DIGITAL_EN 0x80u // Enables digital function
#define IOCON_PIO_FUNC0 0x00u
#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1
#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7
#define IOCON_PIO_INPFILT_OFF 0x0100u // Input filter disabled
#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted
#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function
#define IOCON_PIO_MODE_PULLUP 0x10u
#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled
#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled
// Digital pin function n enabled
#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC0)
#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC1)
#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC4)
#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_INPFILT_OFF | IOCON_PIO_FUNC7)
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
@ -38,28 +63,10 @@ void USB0_IRQHandler(void)
tud_int_handler(0);
}
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT 0
#define LED_PIN 29
#define LED_STATE_ON 0
// WAKE button
#define BUTTON_PORT 0
#define BUTTON_PIN 24
// IOCON pin mux
#define IOCON_PIO_DIGITAL_EN 0x80u /*!<@brief Enables digital function */
#define IOCON_PIO_FUNC0 0x00u
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
#define IOCON_PIO_INPFILT_OFF 0x0100u /*!<@brief Input filter disabled */
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
#define IOCON_PIO_MODE_PULLUP 0x10u
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
void USB1_IRQHandler(void)
{
tud_int_handler(1);
}
/****************************************************************
name: BOARD_BootClockFROHF96M
@ -98,45 +105,86 @@ void board_init(void)
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iocon);
// Enable GPIO0 clock
CLOCK_EnableClock(kCLOCK_Gpio0);
// Init 96 MHz clock
BootClockFROHF96M();
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
#if CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// Init all GPIO ports 54114 only has 2 ports.
GPIO_PortInit(GPIO, LED_PORT);
GPIO_PortInit(GPIO, BUTTON_PORT);
// LED
IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN);
gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0};
GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config);
board_led_write(true);
board_led_write(0);
// Button
IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN | IOCON_PIO_MODE_PULLUP);
gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config);
// USB
const uint32_t port1_pin6_config = (
IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */
IOCON_PIO_MODE_INACT | /* No addition pin function */
IOCON_PIO_INV_DI | /* Input function is not inverted */
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
);
IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */
#ifdef UART_DEV
// UART
IOCON_PinMuxSet(IOCON, UART_RX_PINMUX);
IOCON_PinMuxSet(IOCON, UART_TX_PINMUX);
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */
// Enable UART when debug log is on
CLOCK_AttachClk(kFRO12M_to_FLEXCOMM0);
usart_config_t uart_config;
USART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
USART_Init(UART_DEV, &uart_config, 12000000);
#endif
// USB
IOCON_PinMuxSet(IOCON, USB0_VBUS_PINMUX);
#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT
// LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
// Port0 is Full Speed
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */
CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false);
CLOCK_AttachClk(kFRO_HF_to_USB0_CLK);
/*According to reference mannual, device mode setting has to be set by access usb host register */
CLOCK_EnableClock(kCLOCK_Usbhsl0); /* enable usb0 host clock */
USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK;
CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */
CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq());
#endif
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
// Port1 is High Speed
POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY);
/*According to reference mannual, device mode setting has to be set by access usb host register */
CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */
USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK;
CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */
CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U);
#endif
#else
// LPC5411x series only has full speed device
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy
CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */
#endif
}
//--------------------------------------------------------------------+
@ -151,7 +199,7 @@ void board_led_write(bool state)
uint32_t board_button_read(void)
{
// active low
return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
@ -162,7 +210,7 @@ int board_uart_read(uint8_t* buf, int len)
int board_uart_write(void const * buf, int len)
{
(void) buf; (void) len;
USART_WriteBlocking(UART_DEV, (uint8_t *)buf, len);
return 0;
}

54
hw/bsp/lpc54/family.mk Normal file
View File

@ -0,0 +1,54 @@
SDK_DIR = hw/mcu/nxp/mcux-sdk
DEPS_SUBMODULES += $(SDK_DIR)
include $(TOP)/$(BOARD_PATH)/board.mk
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
-DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
ifeq ($(PORT), 1)
$(info "PORT1 High Speed")
CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED
# LPC55 Highspeed Port1 can only write to USB_SRAM region
CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))'
else
$(info "PORT0 Full Speed")
endif
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT)
SRC_C += \
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
$(MCU_DIR)/system_$(MCU_CORE).c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_power.c \
$(MCU_DIR)/drivers/fsl_reset.c \
$(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \
$(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \
$(SDK_DIR)/drivers/flexcomm/fsl_usart.c
INC += \
$(TOP)/$(BOARD_PATH) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(SDK_DIR)/drivers/common \
$(TOP)/$(SDK_DIR)/drivers/flexcomm \
$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S
# For freeRTOS port source
FREERTOS_PORT = ARM_CM4F

2
hw/bsp/lpc55/boards/double_m33_express/board.h
View File

@ -54,7 +54,7 @@
#define UART_TX_PINMUX 0U, 30U, IOCON_PIO_DIG_FUNC1_EN
// XTAL
//#define XTAL0_CLK_HZ 16000000U
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
#ifdef __cplusplus
}

1
hw/bsp/lpc55/boards/double_m33_express/board.mk
View File

@ -1,5 +1,6 @@
MCU_VARIANT = LPC55S69
MCU_CORE = LPC55S69_cm33_core0
PORT ?= 1
CFLAGS += -DCPU_LPC55S69JBD100_cm33_core0
LD_FILE = $(BOARD_PATH)/LPC55S69_cm33_core0_uf2.ld

2
hw/bsp/lpc55/boards/lpcxpresso55s28/board.h
View File

@ -47,7 +47,7 @@
#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN
// XTAL
#define XTAL0_CLK_HZ 16000000U
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
#ifdef __cplusplus
}

2
hw/bsp/lpc55/boards/lpcxpresso55s69/board.h
View File

@ -47,7 +47,7 @@
#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN
// XTAL
#define XTAL0_CLK_HZ 16000000U
#define XTAL0_CLK_HZ (16 * 1000 * 1000U)
#ifdef __cplusplus
}

26
hw/bsp/lpc55/family.c
View File

@ -39,20 +39,20 @@
//--------------------------------------------------------------------+
// IOCON pin mux
#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */
#define IOCON_PIO_FUNC0 0x00u /*!<@brief Selects pin function 0 */
#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */
#define IOCON_PIO_FUNC4 0x04u /*!<@brief Selects pin function 4 */
#define IOCON_PIO_FUNC7 0x07u /*!<@brief Selects pin function 7 */
#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */
#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */
#define IOCON_PIO_DIGITAL_EN 0x0100u // Enables digital function
#define IOCON_PIO_FUNC0 0x00u // Selects pin function 0
#define IOCON_PIO_FUNC1 0x01u // Selects pin function 1
#define IOCON_PIO_FUNC4 0x04u // Selects pin function 4
#define IOCON_PIO_FUNC7 0x07u // Selects pin function 7
#define IOCON_PIO_INV_DI 0x00u // Input function is not inverted
#define IOCON_PIO_MODE_INACT 0x00u // No addition pin function
#define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled
#define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled
#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) /*!<@brief Digital pin function 0 enabled */
#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) /*!<@brief Digital pin function 1 enabled */
#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) /*!<@brief Digital pin function 2 enabled */
#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) /*!<@brief Digital pin function 2 enabled */
#define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled
#define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled
#define IOCON_PIO_DIG_FUNC4_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC4) // Digital pin function 2 enabled
#define IOCON_PIO_DIG_FUNC7_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC7) // Digital pin function 2 enabled
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler

22
hw/bsp/lpc55/family.mk
View File

@ -1,10 +1,11 @@
UF2_FAMILY_ID = 0x2abc77ec
DEPS_SUBMODULES += lib/sct_neopixel hw/mcu/nxp
SDK_DIR = hw/mcu/nxp/mcux-sdk
DEPS_SUBMODULES += lib/sct_neopixel $(SDK_DIR)
include $(TOP)/$(BOARD_PATH)/board.mk
# TODO change Default to Highspeed PORT1
PORT ?= 0
# Default to Highspeed PORT1
PORT ?= 1
CFLAGS += \
-flto \
@ -30,7 +31,7 @@ endif
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal
MCU_DIR = hw/mcu/nxp/sdk/devices/$(MCU_VARIANT)
MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT)
# All source paths should be relative to the top level.
LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_CORE)_flash.ld
@ -39,11 +40,11 @@ SRC_C += \
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
$(MCU_DIR)/system_$(MCU_CORE).c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_power.c \
$(MCU_DIR)/drivers/fsl_reset.c \
$(MCU_DIR)/drivers/fsl_usart.c \
$(MCU_DIR)/drivers/fsl_flexcomm.c \
$(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \
$(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \
$(SDK_DIR)/drivers/flexcomm/fsl_usart.c \
lib/sct_neopixel/sct_neopixel.c
INC += \
@ -51,7 +52,12 @@ INC += \
$(TOP)/lib/sct_neopixel \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(SDK_DIR)/drivers/common \
$(TOP)/$(SDK_DIR)/drivers/flexcomm \
$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
$(TOP)/$(SDK_DIR)/drivers/lpc_gpio \
$(TOP)/$(SDK_DIR)/drivers/sctimer
SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S

2
hw/bsp/lpcxpresso11u37/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

2
hw/bsp/lpcxpresso11u68/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

2
hw/bsp/lpcxpresso1347/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

2
hw/bsp/lpcxpresso1769/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

22
hw/bsp/lpcxpresso51u68/board.mk
View File

@ -1,4 +1,5 @@
DEPS_SUBMODULES += hw/mcu/nxp
SDK_DIR = hw/mcu/nxp/mcux-sdk
DEPS_SUBMODULES += $(SDK_DIR)
CFLAGS += \
-flto \
@ -13,7 +14,7 @@ CFLAGS += \
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/LPC51U68
MCU_DIR = $(SDK_DIR)/devices/LPC51U68
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/LPC51U68_flash.ld
@ -22,14 +23,20 @@ SRC_C += \
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
$(MCU_DIR)/system_LPC51U68.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_power.c \
$(MCU_DIR)/drivers/fsl_reset.c
$(MCU_DIR)/drivers/fsl_reset.c \
$(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \
$(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \
$(SDK_DIR)/drivers/flexcomm/fsl_usart.c
INC += \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(SDK_DIR)/drivers/common \
$(TOP)/$(SDK_DIR)/drivers/flexcomm \
$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S
@ -38,9 +45,8 @@ LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a
# For freeRTOS port source
FREERTOS_PORT = ARM_CM0
# For flash-jlink target
JLINK_DEVICE = LPC51U68
PYOCD_TARGET = LPC51U68
# flash using pyocd (51u68 is not supported yet)
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC51U68 $<
flash: flash-pyocd

48
hw/bsp/lpcxpresso54114/board.mk
View File

@ -1,48 +0,0 @@
DEPS_SUBMODULES += hw/mcu/nxp
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
-DCPU_LPC54114J256BD64_cm4 \
-DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/LPC54114
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld
SRC_C += \
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
$(MCU_DIR)/system_LPC54114_cm4.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_power.c \
$(MCU_DIR)/drivers/fsl_reset.c
INC += \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers
SRC_S += $(MCU_DIR)/gcc/startup_LPC54114_cm4.S
LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_cm4_hardabi.a
# For freeRTOS port source
FREERTOS_PORT = ARM_CM4F
# For flash-jlink target
JLINK_DEVICE = LPC54114J256_M4
# flash using pyocd
flash: $(BUILD)/$(PROJECT).hex
pyocd flash -t LPC54114 $<

2
hw/bsp/mbed1768/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

2
hw/bsp/ngx4330/board.mk
View File

@ -1,4 +1,4 @@
DEPS_SUBMODULES += hw/mcu/nxp
DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
CFLAGS += \
-flto \

1
hw/mcu/nxp

@ -1 +0,0 @@
Subproject commit 587c65766538a5e1cfb6188ac611ded61f2eb859

1
hw/mcu/nxp/lpcopen Submodule

@ -0,0 +1 @@
Subproject commit 43c45c85405a5dd114fff0ea95cca62837740c13

1
hw/mcu/nxp/mcux-sdk Submodule

@ -0,0 +1 @@
Subproject commit cb21c660991c92e90ece99ccb63a4bc611899c3a

1
hw/mcu/nxp/nxp_sdk Submodule

@ -0,0 +1 @@
Subproject commit 845c8fc49b6fb660f06a5c45225494eacb06f00c