Ha Thach
GitHub
commit
33f713f5ef
|
|
@ -41,6 +41,7 @@ jobs:
|
|||
family:
|
||||
# Alphabetical order
|
||||
- 'imxrt'
|
||||
- 'lpc15'
|
||||
- 'lpc18'
|
||||
- 'lpc55'
|
||||
- 'nrf'
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ The stack supports the following MCUs:
|
|||
- **NXP:**
|
||||
- iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
|
||||
- Kinetis: KL25
|
||||
- LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx
|
||||
- LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55
|
||||
- **Raspberry Pi:** RP2040
|
||||
- **Renesas:** RX63N
|
||||
- **Silabs:** EFM32GG12
|
||||
|
|
|
|||
|
|
@ -89,21 +89,33 @@ This code base already had supported for a handful of following boards (sorted a
|
|||
|
||||
- [FRDM-KL25Z](https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z)
|
||||
|
||||
### NXP LPC
|
||||
### NXP LPC 11-13-15
|
||||
|
||||
- [ARM mbed LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/arm-mbed-lpc1768-board:OM11043)
|
||||
- [Embedded Artists LPC4088 Quick Start board](https://www.embeddedartists.com/products/lpc4088-quickstart-board)
|
||||
- [Embedded Artists LPC4357 Developer Kit](http://www.embeddedartists.com/products/kits/lpc4357_kit.php)
|
||||
- [Keil MCB1800 Evaluation Board](http://www.keil.com/mcb1800)
|
||||
- [LPCXpresso 11u37](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso-board-for-lpc11u37h:OM13074)
|
||||
- [LPCXpresso 11u68](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc11u68:OM13058)
|
||||
- [LPCXpresso 1347](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1347:OM13045)
|
||||
- [LPCXpresso 1549](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1500-cortex-m3/lpcxpresso-board-for-lpc1549:OM13056)
|
||||
|
||||
### NXP LPC 17-40
|
||||
|
||||
- [ARM mbed LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/arm-mbed-lpc1768-board:OM11043)
|
||||
- [Embedded Artists LPC4088 Quick Start board](https://www.embeddedartists.com/products/lpc4088-quickstart-board)
|
||||
- [LPCXpresso 1769](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1769:OM13000)
|
||||
|
||||
### NXP LPC 18-43
|
||||
|
||||
- [Embedded Artists LPC4357 Developer Kit](http://www.embeddedartists.com/products/kits/lpc4357_kit.php)
|
||||
- [Keil MCB1800 Evaluation Board](http://www.keil.com/mcb1800)
|
||||
- [LPCXpresso18S37 Development Board](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc4000-cortex-m4/lpcxpresso18s37-development-board:OM13076)
|
||||
- [LPCXpresso 51U68](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005)
|
||||
- [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089)
|
||||
- [NGX LPC4330-Xplorer](https://www.nxp.com/design/designs/lpc4330-xplorer-board:OM13027)
|
||||
|
||||
### NXP LPC 51
|
||||
- [LPCXpresso 51U68](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005)
|
||||
|
||||
### NXP LPC 54
|
||||
|
||||
- [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089)
|
||||
|
||||
## NXP LPC55
|
||||
|
||||
- [Double M33 Express](https://www.crowdsupply.com/steiert-solutions/double-m33-express)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,72 @@
|
|||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// XTAL
|
||||
#define XTAL_OscRateIn 12000000
|
||||
#define XTAL_RTCOscRateIn 32768
|
||||
|
||||
// LED
|
||||
#define LED_PORT 0
|
||||
#define LED_PIN 25
|
||||
|
||||
// Wake Switch
|
||||
#define BUTTON_PORT 0
|
||||
#define BUTTON_PIN 17
|
||||
|
||||
#define UART_PORT LPC_USART0
|
||||
|
||||
static inline void board_lpc15_pinmux_swm_init(void)
|
||||
{
|
||||
// Pinmux
|
||||
const PINMUX_GRP_T pinmuxing[] =
|
||||
{
|
||||
{0, 25, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_25-BREAK_CTRL-RED (low enable)
|
||||
{0, 13, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_13-ISP_RX
|
||||
{0, 18, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_18-ISP_TX
|
||||
{1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, // PIO1_11-ISP_1 (VBUS)
|
||||
};
|
||||
|
||||
// Pin Mux
|
||||
Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
|
||||
|
||||
// SWIM
|
||||
Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I , 1, 11);
|
||||
Chip_SWM_MovablePortPinAssign(SWM_UART0_RXD_I, 0, 13);
|
||||
Chip_SWM_MovablePortPinAssign(SWM_UART0_TXD_O, 0, 18);
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
LD_FILE = $(BOARD_PATH)/lpc1549.ld
|
||||
|
||||
JLINK_DEVICE = LPC1549
|
||||
|
||||
# flash using pyocd
|
||||
flash: flash-jlink
|
||||
|
|
@ -25,7 +25,8 @@
|
|||
*/
|
||||
|
||||
#include "chip.h"
|
||||
#include "../board.h"
|
||||
#include "bsp/board.h"
|
||||
#include "board.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
|
|
@ -38,33 +39,21 @@ void USB_IRQHandler(void)
|
|||
//--------------------------------------------------------------------+
|
||||
// MACRO TYPEDEF CONSTANT ENUM
|
||||
//--------------------------------------------------------------------+
|
||||
#define LED_PORT 0
|
||||
#define LED_PIN 25
|
||||
|
||||
// Wake Switch
|
||||
#define BUTTON_PORT 0
|
||||
#define BUTTON_PIN 17
|
||||
|
||||
/* System oscillator rate and RTC oscillator rate */
|
||||
const uint32_t OscRateIn = 12000000;
|
||||
const uint32_t RTCOscRateIn = 32768;
|
||||
|
||||
/* Pin muxing table, only items that need changing from their default pin
|
||||
state are in this table. */
|
||||
static const PINMUX_GRP_T pinmuxing[] =
|
||||
{
|
||||
{1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, /* PIO1_11-ISP_1 (VBUS) */
|
||||
};
|
||||
const uint32_t OscRateIn = XTAL_OscRateIn;
|
||||
const uint32_t RTCOscRateIn = XTAL_RTCOscRateIn;
|
||||
|
||||
// Invoked by startup code
|
||||
void SystemInit(void)
|
||||
{
|
||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM1);
|
||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM2);
|
||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
|
||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM);
|
||||
Chip_SYSCTL_PeriphReset(RESET_IOCON);
|
||||
|
||||
// Pin Mux
|
||||
Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
|
||||
board_lpc15_pinmux_swm_init();
|
||||
|
||||
Chip_SetupXtalClocking();
|
||||
}
|
||||
|
|
@ -73,10 +62,10 @@ void board_init(void)
|
|||
{
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
|
@ -89,8 +78,15 @@ void board_init(void)
|
|||
// Button
|
||||
Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
|
||||
|
||||
// UART
|
||||
Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false);
|
||||
Chip_UART_Init(UART_PORT);
|
||||
Chip_UART_ConfigData(UART_PORT, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_1);
|
||||
Chip_UART_SetBaud(UART_PORT, CFG_BOARD_UART_BAUDRATE);
|
||||
Chip_UART_Enable(UART_PORT);
|
||||
Chip_UART_TXEnable(UART_PORT);
|
||||
|
||||
// USB: Setup PLL clock, and power
|
||||
Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I, 1, 11);
|
||||
Chip_USB_Init();
|
||||
}
|
||||
|
||||
|
|
@ -98,19 +94,6 @@ void board_init(void)
|
|||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
|
||||
|
|
@ -130,6 +113,18 @@ int board_uart_read(uint8_t* buf, int len)
|
|||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
return Chip_UART_SendBlocking(UART_PORT, buf, len);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,5 +1,7 @@
|
|||
DEPS_SUBMODULES += hw/mcu/nxp
|
||||
|
||||
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||
|
||||
CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
|
|
@ -17,9 +19,6 @@ CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=un
|
|||
|
||||
MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/lpc1549.ld
|
||||
|
||||
SRC_C += \
|
||||
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
|
||||
$(MCU_DIR)/../gcc/cr_startup_lpc15xx.c \
|
||||
|
|
@ -29,16 +28,12 @@ SRC_C += \
|
|||
$(MCU_DIR)/src/iocon_15xx.c \
|
||||
$(MCU_DIR)/src/swm_15xx.c \
|
||||
$(MCU_DIR)/src/sysctl_15xx.c \
|
||||
$(MCU_DIR)/src/uart_15xx.c \
|
||||
$(MCU_DIR)/src/sysinit_15xx.c
|
||||
|
||||
INC += \
|
||||
$(TOP)/$(BOARD_PATH) \
|
||||
$(TOP)/$(MCU_DIR)/inc
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM3
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = LPC1549
|
||||
|
||||
# flash using jlink
|
||||
flash: flash-jlink
|
||||
Loading…
Reference in New Issue