fff4a248be
Add BSPs for Microchip PIC32MZ MCUs
...
Two boards from Olimex are added:
olimex_hmz144 with PIC32MZ2048EFM144
olimex_emz64.c with PIC32MZ2048EFH064
Both can be programmed with Segger JLINK probe using ICSP
interface. (JTAG not tested but could also work but header
is not mounted).
2022-01-07 14:12:42 +01:00
47218eeb67
No exceptions on broadcom. Add parens to if
2022-01-05 16:07:17 -08:00
7b27b8f498
Unify skip and only logic for build scripts
...
And switch to a single file that can include mcu, family or board.
2022-01-05 15:44:23 -08:00
4fe0a30ec7
Skip net and freertos examples
2022-01-05 14:33:24 -08:00
84e2df51be
Split by compiler for testing
2022-01-05 14:11:39 -08:00
a79ffeb764
Add Raspberry Pi Zero W and Zero 2 W
...
These are different Broadcom chips. The peripherals are essentially
the same. The main differences are:
* The CPU(s)
* The interrupt controller
* The peripheral base address (but not the peripherals that we use)
2022-01-05 13:47:01 -08:00
5f280b3029
add license to dcd file, slightly update readme
2021-12-29 19:25:32 +07:00
84e2f6e0e1
skip freertos example for f1c100s
2021-12-29 19:12:41 +07:00
b943a53b10
update allwinner submodule
2021-12-29 19:04:08 +07:00
2d13ecde1b
add allwinnner driver as submodule
2021-12-29 18:59:47 +07:00
30aba24ddc
Merge branch 'master' of https://github.com/t123yh/tinyusb into t123yh-master
2021-12-29 18:27:29 +07:00
a750c9c902
Increase stack size
2021-12-27 21:28:46 +09:00
a76799b085
Add hcd for Renesas RX
2021-12-27 21:19:02 +09:00
6de423606f
nucleo-f439zi support
2021-12-21 18:24:05 +01:00
311248c8b0
add s3 devkitc
2021-12-21 00:10:38 +07:00
2ab3988d9f
add s3 devkitm
2021-12-20 23:54:28 +07:00
9b2e78c915
samd21: make uart_init() static
...
Avoids a linker conflict if programs are using the same function name.
2021-12-20 15:43:16 +08:00
04fd8673cd
Merge branch 'master' of https://github.com/hathach/tinyusb into feature-kuiic
2021-12-13 08:56:58 -08:00
d097178ab0
correct wiring note
2021-12-13 17:59:43 +07:00
51acc3e1b9
update g4 bsp
2021-12-09 12:42:08 +07:00
e72a6e90b9
added support for building uf2 file
2021-12-08 15:24:14 -08:00
59dcf2062f
adding support for KUIIC board
2021-12-08 14:31:44 -08:00
21fa7ea468
Correct path for using the ft90x-sdk submodule (BRTSG-FOSS / ft90x-sdk). Default to ft90x-sdk instead of pre-built library.
2021-12-08 13:56:23 +00:00
45869958f6
Add FT9xx to more examples which support High-Speed
2021-12-08 10:03:33 +00:00
5039a5e54c
Update code to implement changes from upstream master
2021-12-08 09:34:29 +00:00
9a7db98593
Merge branch 'master' into port-ft90x
2021-12-08 08:36:43 +00:00
527036b1f5
Initialize MMU if we are executing from DDR
2021-12-08 13:39:27 +08:00
cd76193f3c
try updating clock configure for g4 nucleo (not work yet)
2021-12-08 10:37:46 +07:00
43621ab9ed
Update README
2021-12-07 22:58:19 +08:00
75f7fb3d9d
Add mksunxi tool to make flashable image
2021-12-07 22:53:52 +08:00
cde824f17f
Merge pull request #1222 from scoudreau/swo_logger
...
Remove unused-parameter errors when LOGGER=swo
2021-12-07 19:53:27 +07:00
8e0400d531
change uart baudrate for tm4c123 to 115200
2021-12-07 16:28:24 +07:00
03835c8183
move hcd_musb.c include to family.mk
2021-12-07 16:27:48 +07:00
28fb51c180
Add TODO to README
2021-12-04 18:08:23 +08:00
68ca62dfd7
Add BSP support for F1C100s
2021-12-04 18:02:07 +08:00
6ecd93eb60
Merge branch 'master' into add_hcd_for_msp_exp432e401y
2021-12-03 00:30:09 +07:00
83dc3e25f0
more work to abstract chipidea driver
2021-12-01 23:30:09 +07:00
61a9e125db
more ci abstract
2021-12-01 23:19:17 +07:00
c9d9bfab92
Remove unused-parameter errors when LOGGER=SWO
2021-12-01 17:10:31 +01:00
0612433eef
add chipidea highspeed controller
...
add warning to transdimension for the rename
2021-12-01 12:14:44 +07:00
b3dddc77eb
Add initialization sequence as a HOST
2021-11-29 00:40:23 +09:00
edf3f35016
Update ft90x-sdk
...
Update submodule for FT90X SDK to point to the v2.5.0 release code currently in main.
2021-11-22 12:38:04 +00:00
ba76b2e339
Add submodule for ft90x SDK
...
Add Bridgetek FT90x SDK as submodule.
2021-11-22 10:33:07 +00:00
8a18c22c2f
add BCM_VERSION
2021-11-22 10:59:22 +07:00
21787ecdd3
update bcm prph
2021-11-22 10:52:53 +07:00
17ef1503c8
move tm4c132 into bsp family, add it into ci
2021-11-08 17:37:21 +07:00
f65917f51a
rename to simply OPT_MCU_MSP432E4, add msp432e to ci
2021-11-08 17:29:26 +07:00
6fea50f735
musb work well with tm4c123
2021-11-08 16:41:29 +07:00
91646d039c
add flash-openocd target. correct ek-tm4c123 button state
2021-11-08 16:41:29 +07:00
23e6e0ef33
merge pull request 670 for tm4c123gxl bsp
2021-11-08 16:41:29 +07:00
dd7eb36830
Remove unnecessary lines
2021-11-06 23:10:11 +09:00
30d3bf8bec
Update TI driver
2021-11-06 23:05:27 +09:00
23ef8b2c64
Change the variables for a switch and a LED to symbols defined by the macros
2021-11-06 19:32:15 +09:00
e4520e7aa7
Add statements for FreeRTOS
2021-11-06 00:06:27 +09:00
50ca0dda2c
Add dcd_musb.c
2021-11-06 00:06:26 +09:00
f183d0810b
Add files for msp432e4
2021-11-06 00:06:26 +09:00
3fc3e400b0
add xmc4000 to ci build
2021-11-05 13:23:31 +07:00
d87a897a7b
xmc4500 ported, cdc msc example run fine
2021-11-05 13:13:21 +07:00
d9cf49cbfd
add xmclib as submodule
2021-11-05 12:00:27 +07:00
a3fc107d94
xmc4500 led blinky, button ok
2021-11-05 11:57:36 +07:00
310f287f44
couldn't get g4 usb clock and pin setup just yet. Leave it as it is for now
2021-11-04 17:52:55 +07:00
f90f5ea369
adding g4 family with g474nucleo, able to blink led and button
2021-11-04 16:16:51 +07:00
8b3708b44f
rename l4 board to match other convention
2021-11-04 13:57:03 +07:00
fc59515bfd
Merge pull request #1163 from hathach/generalize-synopsys-dwc2
...
Generalize synopsys dwc2
2021-11-04 13:41:25 +07:00
4a8ac71711
Add timer1 on pi4 for blinky
...
this get usb irq triggered even without ISB() in previous commit
2021-11-04 12:31:16 +07:00
0faff5a859
update broadcom peripherals to latest
2021-11-03 13:13:08 +07:00
e16506cb52
clean up
2021-11-03 12:24:10 +07:00
0e733ae14b
add pi4 to ci build in build_aarch64
2021-11-02 21:46:23 +07:00
1046786acf
change broadcom submodule path from git to http
2021-11-02 18:17:59 +07:00
7e68894726
grouping stm32L4 family in bsp
2021-11-02 16:10:40 +07:00
aa682d7301
add fix for stm32l4 (version 3.10a) which generate transfer complete when setup recieved and control out data complete
2021-11-02 13:52:30 +07:00
5fb16a8f2c
samd21: enable SysTick only if running w/o OS
2021-11-01 18:01:18 +01:00
ba34f420db
Adds support for Adafruit Trinket M0
2021-10-31 12:34:53 +01:00
4ea8f1441d
correct freertos port for efm32gg
2021-10-31 00:19:17 +07:00
215e0595ab
change F207 to use new dwc2
2021-10-31 00:09:40 +07:00
9cd5a87c64
add support for EFM32GG
...
merge GG12 GG12 to simply OPT_MCU_EFM32GG
2021-10-30 20:42:55 +07:00
19a26729b0
Add Adafruit QT Py board
...
Straight copy of itsybitsy_m0/ with MCU changed to
ATSAMD21E18
LED and button are disabled.
LED is a neopixel so could be added later.
2021-10-29 18:00:23 +08:00
8e95b807f7
samd21: Make LED_PIN and BUTTON_PIN optional
...
Some boards don't have them, just ignore
2021-10-29 13:49:15 +08:00
7def380058
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 12:52:18 +07:00
6a658007a5
Changes to use ft90x-sdk as submodule or installed SDK from toolchain.
2021-10-27 12:30:51 +01:00
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
bb5dab5c2e
add hw config struct
2021-10-26 22:48:01 +07:00
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
32742571da
switch gd32 and stm32f4 to use new dwc2 driver
2021-10-25 00:06:57 +07:00
06de6b725c
adding generalized dwc2 driver
2021-10-24 23:24:46 +07:00
311c05b401
Merge branch 'master' into fix-warnings
2021-10-23 21:23:56 +07:00
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
826b34a8ac
enable -Wnull-dereference
2021-10-18 00:13:40 +07:00
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
a5f516893b
more with -Wcast-qual
2021-10-17 16:36:53 +07:00
0b249618b0
fix -Wcast-qual
2021-10-15 23:54:31 +07:00
7596cb3079
update some sense warning from -Wconversion
2021-10-15 15:54:32 +07:00
06d9555389
More warning cleanup
...
- physically suppress warnings in TinyUSB headers using pragmas so they don't break -Werror compilation of external files that include them
- fix compiler warnings in rp2040 port
- add cmake method to rp2040 port to allow an external project to suppress warnings in TinyUSB itself
2021-10-14 15:23:26 -05:00
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
b26cc2cc46
Add linkermap for size analysis ( #1136 )
...
* add NO_LTO option to make
* add linkermap submodule and linkermap target
* add linkermap to ci build
* linkermap doesn't work with esp32sx map file yet
* add note for linkermap target
2021-10-13 00:57:45 +07:00
379537cb6d
Merge branch 'master' into add_uvc
2021-10-12 22:01:02 +07:00
b6d09ca761
Add compile option to allocate video data into flash in video_capture example
2021-10-09 23:02:18 +09:00
a3a18c9ed3
Change the video image to scrolling color bars.
2021-10-09 19:51:51 +09:00
5e6edecaa3
Streamline settings for board.
2021-10-07 17:00:28 +01:00
Jerzy Kasenberg