2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
1cdd1b0209
Update pico sdk 1.1.0 ( #712 )
...
* update pico-sdk to 1.1.0
also correct fetch_submodule_if_empty behavior
2021-03-10 13:26:14 +07:00
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
5799c471f1
group h743eval and h743nucleo into stm32h7
...
tested and work well
2021-03-03 20:07:17 +07:00
b066fdc2c6
move fomu to its own family, update ci with build risv
2021-03-02 12:24:12 +07:00
c222f6f111
try to fetch needed mcu submodule while running make
2021-03-01 20:25:55 +07:00
ba69da1d8f
add support for LOG=2
...
LOGGER=rtt is not tested since jlink doesn't support rp2040 just yet
2021-01-29 11:24:05 +07:00
e230d683ca
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
4a0f5cbd63
change output filename to BOARD-Directory
2021-01-26 12:46:24 +07:00
0e585570a3
rename build output
2021-01-25 23:40:52 +07:00
b6e9c42b02
update cmake build to work with esp32s2 and rp2040
2021-01-22 14:58:32 +07:00
0cf2b02791
Merge branch 'master' into group-boards-into-family
2021-01-22 11:17:10 +07:00
d7cfd8b91d
replaced variable name to CMDEXE from UNAME.
...
removed the rule that .d files are converted to .P files.
2021-01-14 01:19:43 +09:00
8c5c46454f
also build boards without family
2021-01-13 12:56:48 +07:00
8fa083d79e
added support for cmd.exe as a shell on make.
2021-01-11 15:56:16 +09:00
630692d81b
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
658194ccc4
group more nrf boards
2020-11-28 00:45:44 +07:00
4130c50b01
grouping nrf boards
2020-11-28 00:16:28 +07:00
865ebf7c5d
fflush(stdout) for keyboard host example
2020-09-04 00:50:10 +07:00
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
017c95037f
add usbd edpt open
...
- RTT mode is blocking to prevent log lost
- Improve logging message
2020-04-26 14:51:44 +07:00
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
afc4042375
add LOGGER option to use rtt
...
update example readme for debug log. Update bug template to ask for LOG
as well.
2020-04-22 17:08:41 +07:00
09262d7f7e
house keeping
2020-03-26 22:04:24 +07:00
d74a92bf45
makefile clean up
...
allow board to define CROSS_COMPILE (default to arm gcc)
2020-03-25 14:06:51 +07:00
9a48e98fad
Merge branch 'master' into develop
2020-03-24 12:16:15 +07:00
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
bc0779de0a
per review
...
- remove -Wno-error=lto-type-mismatch
- change back to unsigned int
2020-03-23 23:22:52 +07:00
056d0bb4bf
remove -Wnested-externs since many driver does this including CMSIS_5
2020-03-23 22:52:59 +07:00
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
dce070ebe0
examples: make: specify CROSS_COMPILE for fomu
...
When BOARD=fomu, use the riscv cross-compiler. Otherwise, use the
default arm compiler. This can be overridden by passing
CROSS_COMIPLE on the command line.
Note that there are now three common risc-v prefixes:
- riscv32-unknown-elf- : Common for users who compile their own
- riscv64-unknown-elf- : Upstream multiarch toolchain from SiFive
- riscv-none-embed- : xPack embedded version of SiFive toolchain
Here we assume users are using the `riscv-none-embed-` toolchain from
xPack, because it appears to be growing more common. Additionally,
there is much confusion surrounding `riscv64-unknown-elf-`, which
actually includes both 32- and 64-bit runtimes and can generate software
for both.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:26:00 -08:00
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
5ca75eb84c
seperate DEBUG from LOG
2019-11-03 13:18:02 +07:00
de333a6f18
clean up warning, msp430 gcc 8.3 fixed the library lto issue
2019-10-29 16:21:31 +07:00
4e8c57171c
Merge branch 'master' into cr1901-msp430f5529
2019-10-25 21:20:05 +07:00
558b4dbde3
change DEBUG optimization option from O0 to Og
...
add uart write to board test example
2019-10-18 17:50:29 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
0747c4b61b
Add Spresense board
2019-10-04 13:19:34 +02:00
5ee1070c16
Merge remote-tracking branch 'origin' into msp430f5529
2019-10-02 23:18:49 -04:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
7b2f8cc73a
added stm32 L0 support
...
close #125
2019-09-20 13:49:33 +07:00
6280e4e7cb
msp430f5529: Add empty msp_exp430f5529lp BSP and DCD.
2019-09-14 18:02:17 -04:00
2e00019aae
board_test work with lpcxpresso55s69
2019-09-03 13:25:36 +07:00
90fea785c6
use adafruit-nrfutil dfu as default flash target for feather nrf52840
2019-05-29 16:56:26 +07:00
231773cae9
move all build into folder _build
2019-05-24 12:04:47 +07:00
6861b670fc
add uf2 target for uf2 bootloader board: metro m0/m4 feather nrf52840
2019-05-20 12:35:33 +07:00
Alex Lisitsyn