doc: add EDID I²C programming
This commit is contained in:
parent
41435806b8
commit
9e35864548
|
@ -17,6 +17,11 @@ if the ERROR LED is on, the possible cause is one of the following:
|
||||||
- tried reading the EDID from the monitor, but it is not connected
|
- tried reading the EDID from the monitor, but it is not connected
|
||||||
- communication with monitor failed, due to damaged cable
|
- communication with monitor failed, due to damaged cable
|
||||||
- monitor EDID is invalid
|
- monitor EDID is invalid
|
||||||
|
- storing EDID in EEPROM failed
|
||||||
|
|
||||||
|
the firewall only acts as an I²C EEPROM at address 0x50 toward the HDMI device to provide the EDID information.
|
||||||
|
if the EDID switch is on the BLOCK position, the EEPROM is read only.
|
||||||
|
if the EDID switch is on the ALLOW position, writing the EEPROM is possible over the HDMI connection using standard I²C write operations.
|
||||||
|
|
||||||
limitations
|
limitations
|
||||||
===========
|
===========
|
||||||
|
|
Loading…
Reference in New Issue