led_ws2812b: use open drain data signal
This commit is contained in:
parent
9b9751e79d
commit
e9f7e574ba
|
@ -38,6 +38,9 @@
|
|||
/** @defgroup led_ws2812b_spi SPI peripheral used to control the WS2812B LEDs
|
||||
* @{
|
||||
*/
|
||||
/** SPI peripheral
|
||||
* @note SPI2 is 5V tolerant and can be operated in open-drain mode will 1 kO pull-up resistor to 5V to get 5V signal level
|
||||
*/
|
||||
#define LED_WS2812B_SPI 2 /**< SPI peripheral */
|
||||
/** @} */
|
||||
|
||||
|
@ -105,7 +108,7 @@ void led_ws2812b_setup(void)
|
|||
|
||||
// setup SPI to transmit data
|
||||
rcc_periph_clock_enable(RCC_SPI_MOSI_PORT(LED_WS2812B_SPI)); // enable clock for SPI output peripheral
|
||||
gpio_set_mode(SPI_MOSI_PORT(LED_WS2812B_SPI), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, SPI_MOSI_PIN(LED_WS2812B_SPI)); // set MISO as output (needs to be shifted to 5V)
|
||||
gpio_set_mode(SPI_MOSI_PORT(LED_WS2812B_SPI), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_ALTFN_OPENDRAIN, SPI_MOSI_PIN(LED_WS2812B_SPI)); // set MOSI as output (push-pull needs to be shifted to 5V, open-drain consumes up to 5 mA with pull-up resistor of 1 kO)
|
||||
rcc_periph_clock_enable(RCC_AFIO); // enable clock for SPI alternate function
|
||||
rcc_periph_clock_enable(RCC_SPI(LED_WS2812B_SPI)); // enable clock for SPI peripheral
|
||||
spi_reset(SPI(LED_WS2812B_SPI)); // clear SPI values to default
|
||||
|
|
Loading…
Reference in New Issue