stm32f1/.gitmodules

[submodule "libopencm3"]
	path = libopencm3
	url = https://github.com/manuelbl/libopencm3
	ignore = all
	branch = no-vbus-sensing
add libopencm3 and STM32duino-bootloader submodules dependencies 2016-01-15 15:36:00 +01:00			`[submodule "libopencm3"]`
			`path = libopencm3`
libopencm3: use branch with OTG fix because the MINIF4 board does not have an optional pull-up resistor on D+, the device is not enumerated without this fix. this fix is not yet in official libopencm3 master. 2020-11-24 16:10:56 +01:00			`url = https://github.com/manuelbl/libopencm3`
add all common changes, files, and libraries from previous project 2016-02-18 10:39:08 +01:00			`ignore = all`
libopencm3: use branch with OTG fix because the MINIF4 board does not have an optional pull-up resistor on D+, the device is not enumerated without this fix. this fix is not yet in official libopencm3 master. 2020-11-24 16:10:56 +01:00			`branch = no-vbus-sensing`