correct bootloader comment
This commit is contained in:
parent
c56bee6ad1
commit
35ffab225e
|
@ -11,9 +11,9 @@ F_CPU = 16000000UL
|
||||||
# the flasher
|
# the flasher
|
||||||
PROGRAMMER = arduino
|
PROGRAMMER = arduino
|
||||||
PORT = /dev/ttyUSB0
|
PORT = /dev/ttyUSB0
|
||||||
# to flash
|
# flash using the bootloader pre-programmed on the arduino
|
||||||
# use the aduino bootloader, with a baudrate of 57600
|
# in this case we first require the optiboot bootloader to be flashed (which supports a higher baurate of 115200bps instead of the 57600bps of the default arduino bootloader)
|
||||||
# reset the device to start (optiboot) bootloader
|
# reset the arduino device to start the bootloader
|
||||||
FLASHER = avrdude -p $(DEVICE) -c $(PROGRAMMER) -P $(PORT) -b 115200 -D
|
FLASHER = avrdude -p $(DEVICE) -c $(PROGRAMMER) -P $(PORT) -b 115200 -D
|
||||||
|
|
||||||
# compiler executables
|
# compiler executables
|
||||||
|
@ -57,7 +57,7 @@ debug: CFLAGS += -DDEBUG
|
||||||
debug: map lst all
|
debug: map lst all
|
||||||
|
|
||||||
# reset board by setting DTR
|
# reset board by setting DTR
|
||||||
# the capacitor on DTR with create a pulse on RESET
|
# the capacitor on DTR will create a pulse on RESET
|
||||||
# after reset the bootloader is start
|
# after reset the bootloader is start
|
||||||
# the bootloader can be used to reflash the device
|
# the bootloader can be used to reflash the device
|
||||||
reset:
|
reset:
|
||||||
|
|
Loading…
Reference in New Issue