- fix warnings build hcd max3421 with rp2040
- add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1
will enable this
- add max3421 driver implementation for rp2040 family
- update tusb_config for host to allow easy enable host selection for
rp2040 (default/pio-usb/max3421)
previosuly users of TinyUSB (e.g. pico-examples) would have to decide this for themselves. This function couples
the check closer with the actual version of Pico-PIO-USB used (since TinyUSB picks)
* include_guard requires GLOBAL as family.cmake is included in multiple non child places
* the following recently added check is suprfluous (family_configure_host_example for rp2040 should do this already),
and breaks if pico_pio_usb is not avaialble, so i have removed
# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
if(FAMILY STREQUAL "rp2040")
family_add_pico_pio_usb(${PROJECT})
endif()
* added new familt_example_missing_dependency functino to print missing dependency warning, so
pico-examples can override it to be less in your face, and also more contextual to pico-examples
Don't mark IN buffers as available during the last 200us of a full-speed
frame. This avoids a situation seen with the USB2.0 hub on a Raspberry
Pi 4 where a late IN token before the next full-speed SOF can cause port
babble and a corrupt ACK packet. The nature of the data corruption has a
chance to cause device lockup.
Use the next SOF to mark delayed buffers as available. This reduces
available Bulk IN bandwidth by approximately 20%, and requires that the
SOF interrupt is enabled while these transfers are ongoing.
Inherit the top-level enable from the corresponding Pico-SDK flag.
Applications that will not use the device in a situation where it could
be plugged into a Pi 4 or Pi 400 (for example, when directly connected
to a commodity hub or other host) can turn off the flag in the SDK.
v2: use a field in hw_endpoint to mark pending.
v3: Partial rewrite following review comments
- Stub functions out if the workaround is not required
- Only force-enable SOF while any vulnerable endpoints are active
- Respect dcd_sof_enable() functionality
- Get rid of all but necessary ifdef hackery
- Fix a bug where the "endpoint lock" was used with an uninitialised pointer.
- remove "-Wno-stringop-overflow -Wno-array-bounds"
- skip -Wconversion for gcc 9 and prior
- suppress_tinyusb_warnings only when building with gcc 9 and below
* gcc 9.2.1 has some spurious -Wconversion warnings
* cmake 3.18 and above require set_target_properties to be added from the target directory (so added it to all examples)
* fixed a few warnings in a couple of examples
hathach