c350616038
fix:Resource leak: fp
...
Signed-off-by: yuxiaojun <yuxiaojun1011@outlook.com>
2023-08-28 15:24:14 +08:00
d7175ad834
update nrf cmake and make to support nrf5340 (pca10095)
2023-05-15 23:34:24 +07:00
25d802532c
fix spelling
2023-03-17 18:34:43 +07:00
3623ba1884
fix trailing space and new line
...
temporarily disable codespell
2023-03-17 16:12:49 +07:00
7e6a6e75bc
remove the rest of mcu submodules
2023-03-10 23:41:27 +07:00
fb9180b6eb
remove most of the submodules
2023-03-10 23:36:53 +07:00
76f43a7a16
starting to remove submodule cmsis5 and nrfx
2023-03-10 19:23:23 +07:00
95acf3960d
update pico-pio-usb to include data pid fix (0.5.1)
2023-02-14 16:11:33 +07:00
88f3279c3c
Merge branch 'master' into port-ft90x
2023-01-30 11:40:53 +07:00
949950e592
Merge branch 'master' into ch32v307
2023-01-07 23:46:46 +07:00
9f440e5c69
Update SDK for FT9xx to include 3rdparty sources
2022-12-15 10:27:49 +00:00
aceab1dcf3
Merge branch 'hathach:master' into port-ft90x
2022-11-30 12:16:52 +00:00
1fce76ad47
Fix issue with the CDC SetLineCoding request
...
The SetLineCoding would fail as host would send the SETUP OUT phase before tinyUSB had setup a transaction for it. ft9xx port would ignore the transfer since there was no valid transaction setup for it. One SETUP data phase packet is cached now.
2022-11-28 17:41:00 +00:00
5785467016
update pico-pio-usb submodule and its warnings suppress
2022-11-28 23:21:17 +07:00
9ccfb384e8
Update to v2.6.0 library
2022-11-24 12:17:55 +00:00
a061bc4173
bump up pico-pio-usb
2022-11-06 14:46:44 +07:00
8a89365bb2
Add stm32u5xx offical driver.
2022-10-11 13:50:11 +08:00
19768936ae
bump up mcux-sdk for rt11xx, add back OPT_MCU_MIMXRT11XX
2022-07-11 14:01:18 +07:00
5a378703fb
fix end symbol for samx7x and same5x
2022-06-29 15:05:09 +07:00
4f6e770eda
add more warning option, also fix -Wconversion with rp2040
...
-Wuninitialized, -Wunused, -Wredundant-decls
2022-06-24 19:46:19 +07:00
2683deb0dd
Merge branch 'master' into ch32v307
2022-05-21 13:54:25 +07:00
4586d8f119
add upstream Pico-PIO-USB
2022-05-16 13:44:06 +07:00
735300b53c
remove cxd56 __pycache-_ folder
2022-03-28 12:47:32 +07:00
fccbcfc889
Add WCH CH32V307 port
...
Add WCH mcu submodule
Add CH32V307V-R1-1v0 bsp
2022-03-22 00:30:46 +10:30
2bef4410f9
Add stm32wb cmsis and hal driver submodules from ST
2022-03-05 17:53:57 +01:00
7de166390e
Merge branch 'master' into master
2022-01-25 22:29:05 +07:00
efc29baead
Merge branch 'master' into port-ft90x
2022-01-17 12:36:39 +07:00
a79ffeb764
Add Raspberry Pi Zero W and Zero 2 W
...
These are different Broadcom chips. The peripherals are essentially
the same. The main differences are:
* The CPU(s)
* The interrupt controller
* The peripheral base address (but not the peripherals that we use)
2022-01-05 13:47:01 -08:00
b943a53b10
update allwinner submodule
2021-12-29 19:04:08 +07:00
2d13ecde1b
add allwinnner driver as submodule
2021-12-29 18:59:47 +07:00
9a7db98593
Merge branch 'master' into port-ft90x
2021-12-08 08:36:43 +00:00
527036b1f5
Initialize MMU if we are executing from DDR
2021-12-08 13:39:27 +08:00
75f7fb3d9d
Add mksunxi tool to make flashable image
2021-12-07 22:53:52 +08:00
68ca62dfd7
Add BSP support for F1C100s
2021-12-04 18:02:07 +08:00
edf3f35016
Update ft90x-sdk
...
Update submodule for FT90X SDK to point to the v2.5.0 release code currently in main.
2021-11-22 12:38:04 +00:00
ba76b2e339
Add submodule for ft90x SDK
...
Add Bridgetek FT90x SDK as submodule.
2021-11-22 10:33:07 +00:00
21787ecdd3
update bcm prph
2021-11-22 10:52:53 +07:00
30d3bf8bec
Update TI driver
2021-11-06 23:05:27 +09:00
d9cf49cbfd
add xmclib as submodule
2021-11-05 12:00:27 +07:00
0faff5a859
update broadcom peripherals to latest
2021-11-03 13:13:08 +07:00
6a658007a5
Changes to use ft90x-sdk as submodule or installed SDK from toolchain.
2021-10-27 12:30:51 +01:00
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
2ef200003d
Update broadcom library
2021-10-22 09:31:24 -07:00
35b62810c3
Update submodule
2021-10-22 09:00:42 -07:00
4ab14867da
Trying to get USB init
2021-10-12 16:47:53 -07:00
37c5eeb51d
Rename directories to indicate that FT930 and FT900 devices are both covered by the same SDK and src/portable code. Board makefile includes __FT900__ macro for FT90x and __FT930__ macro for boards with FT93x.
2021-10-06 16:50:55 +01:00
98ab8117d6
USB seems to init ok
2021-10-05 18:20:44 -07:00
62c613f6d2
Add initial port for FT9xx series from Bridgetek.
...
Add FT90X and FT93X to the list of devices in tusb_option.h. 1700 for FT90x and 1701 for FT93x.
Set endpoint attributes for FT90x and FT93x in dcd_attr.h.
Add FT90x routines for USB device in src/portable/bridgetek/ft90x/dcd_ft90x.c
The location for hardware header files and libraries is hw/mcu/bridgetek/ft90x/hardware. There are no files in the repository, but files will be linked as a submodule in the future. The required files can be copied from or linked to the location "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware" once the toolchain is installed.
Makefile for the MM900EV1B board for developing with an FT900 device is present. Use "BOARD=mm900ev1b".
2021-10-05 13:54:47 +01:00
0932d502c7
remove bcm files
2021-09-30 14:50:38 -07:00
3eeb79be4f
update mm32sdk submodule
2021-09-29 15:20:14 +07:00
yuxiaojun