kkitayam
0b76a2da88
added a setting for RX63X
2021-03-28 00:34:29 +09:00
kkitayam
5f4e6dafc5
added short-enums into CFLAGS
2021-03-28 00:10:53 +09:00
kkitayam
4c832a9195
Set newlib as the default library
2021-03-27 22:21:47 +09:00
kkitayam
eab214e07c
added settings for LWIP and FreeRTOS
2021-03-27 19:12:34 +09:00
kkitayam
e48b2c681e
fixed definitions for stack areas
2021-03-27 16:00:56 +09:00
kkitayam
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
kkitayam
18be454011
added board files
2021-03-26 19:30:53 +09:00
Rafael Silva
143582870c
add efm32gg12 family
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com>
2021-03-23 18:59:21 +00:00
Jean Gressmann
8e6f298aa1
Merge upstream TinyUSB master
2021-03-21 09:53:57 +01:00
Jean Gressmann
1f9b7b0c48
SAM54 Xplained Pro: update board setup documentation
2021-03-21 09:48:49 +01:00
Jean Gressmann
1a5a113655
SAM54 Xplained Pro: reduce board setup code for maintenance
...
The board now runs off the internal oscillator at 48 MHz.
This is sufficient to run the TinyUSB examples.
A better performing clock setup is keep in the file as init_clock_xtal()
as an example.
2021-03-21 09:43:29 +01:00
Jean Gressmann
a2006ce214
SAM 54 Xplained Pro: remove board specific define
2021-03-21 09:38:02 +01:00
Ned Konz
5e74a7b548
Fixed case in linker script name
2021-03-19 12:27:44 -07:00
Ned Konz
2f6f931553
Removed asserts
2021-03-19 12:12:09 -07:00
Ned Konz
aa54135087
Initial commit; copied from stmf072-disco and modified for -EVAL board
2021-03-19 10:57:58 -07:00
hathach
249852d25c
use boot2_generic_03h for adafruit feather rp2040
...
- also use boot2_generic_03h for now for itsy bitsy and qt rp2040
- change default flash target for rp2040 to flash-pyocd
2021-03-18 19:53:39 +07:00
hathach
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
hathach
b221cedf80
spaces
2021-03-17 21:36:52 +07:00
hathach
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
hathach
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
Jean Gressmann
01ec0d49ca
SAM E54 XPlained Pro: use proper defines SPI->USART for board init
2021-03-13 14:51:16 +01:00
Jean Gressmann
bcf9c8cb27
SAM E54 XPlained Pro: free up DPLL1 for application
2021-03-13 14:50:55 +01:00
hathach
7afe1d9e16
clean up
...
some how lpc55 ci cannot build without pre-checkout lib/sct_neopixel
2021-03-05 22:49:29 +07:00
hathach
ca6abea97d
nrf add lib/CMSIS_5 to DEPS_SUBMODULES
2021-03-05 22:30:03 +07:00
hathach
7d877e286a
update DEPS_SUBMODULES to optimize ci
2021-03-05 22:24:03 +07:00
hathach
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
hathach
b846ded487
merge no-family example build
...
specify FAMILY_SUBMODULES for all boards
2021-03-04 22:50:45 +07:00
hathach
8cabbb28df
fix enum walkaround forever check for SE0 when pull up is disabled
2021-03-04 18:36:18 +07:00
hathach
16f501a14e
clean up
2021-03-03 20:25:44 +07:00
hathach
5d226ee733
add h745disco to family group
2021-03-03 20:22:55 +07:00
hathach
5799c471f1
group h743eval and h743nucleo into stm32h7
...
tested and work well
2021-03-03 20:07:17 +07:00
hathach
e1966f8d91
mcb1800 and lpc18s37 work well with both device and host demo
2021-03-03 17:29:30 +07:00
hathach
0dc1a3d3af
add lpc18 family
2021-03-03 16:03:21 +07:00
hathach
d91979cfef
rp2040 able to get log with rtt
...
add note for segger rtt block search range
2021-03-02 23:18:44 +07:00
hathach
ce942baad2
update pico-sdk to more recent commit
...
- move target_link_libraries() to family.cmake
- enable pico_bootsel_via_double_reset
2021-03-02 22:57:33 +07:00
Ha Thach
559ff80643
Merge pull request #684 from hathach/rp2040-host-example
...
add rp2040 to host example build
2021-03-02 13:03:52 +07:00
hathach
b066fdc2c6
move fomu to its own family, update ci with build risv
2021-03-02 12:24:12 +07:00
hathach
71313d934d
update ci for msp430 family
2021-03-02 11:50:57 +07:00
hathach
a2366fce53
move msp430 into family
2021-03-02 11:08:44 +07:00
hathach
c34b6b2324
remove lib/CMSIS_4 submodule, move nrf to lib/CMSIS_5
2021-03-02 01:18:34 +07:00
hathach
76b4b3f827
fix ci build for same board
2021-03-01 21:54:57 +07:00
hathach
26d9897551
update microchip_driver
2021-03-01 21:24:11 +07:00
hathach
9bc921b342
update family submodule
...
temporarily disable other orphaned and esp32s2 build
2021-03-01 20:48:30 +07:00
hathach
c222f6f111
try to fetch needed mcu submodule while running make
2021-03-01 20:25:55 +07:00
hathach
e9059b5d84
added lpcxpresso 55s28
2021-03-01 12:31:31 +07:00
hathach
2e42858537
move lpc55 into its own family
2021-03-01 00:39:48 +07:00
Jean Gressmann
7d9cddccd2
SAM E54 Xplained Pro: applies reviewer feedback
2021-02-28 08:14:17 +01:00
Jean Gressmann
d2575009a1
SAM 54 Xplained Pro: fix inverted logic for board led
2021-02-28 06:19:25 +01:00
hathach
fa8c7bc334
fix indent
2021-02-26 14:08:57 +07:00
hathach
f6b48c07fc
add rp2040 to host example build
2021-02-26 14:05:08 +07:00
hathach
1dbbfdfe45
clean up
2021-02-24 12:34:23 +07:00
hathach
ebc6253bd4
rt1011 msc host work
2021-02-23 10:20:11 +07:00
hathach
de95585258
nxp tdi: hcd_init() reset and set host mode
2021-02-23 01:27:52 +07:00
Jean Gressmann
16c8f75637
Adds support for Microchip SAM E54 Xplained Pro
2021-02-20 16:00:27 +01:00
Ha Thach
be9f86ca9e
Merge pull request #660 from hathach/fix-typo-midi-write24
...
Fix typo midi write24
2021-02-19 11:22:21 +07:00
hathach
c245305f72
update adafruit rp2040 board define
2021-02-19 10:50:50 +07:00
Andrew Scheller
2145ab7664
rp2040/family.c: allow LED_PIN to be undefined
2021-02-18 11:53:18 +00:00
tfx2001
1b678eccf5
add basic support for rt-thread
2021-02-08 20:46:49 +08:00
Katherine Temkin
2997e78da3
bsp: rename SAMD21 LUNA variant to luna_d21
...
We now have SAMD21 and SAMD11 variants of LUNA; so we'll rename the
existing LUNA BSP to be more specific / reflect its version.
2021-02-03 13:35:07 -07:00
Katherine Temkin
6f02e5f1f8
add BSP for SAMD11 variant of Great Scott Gadgets' LUNA boards (SAMD11)
2021-02-03 13:33:40 -07:00
hathach
b739c5a837
added pyportal
2021-02-03 13:19:34 +07:00
hathach
d24c702b63
add pybadge
...
also correct other samd51 tx,rx pin (not used yet)
2021-02-03 13:12:02 +07:00
hathach
8d973a36ed
add adafruit esp32s2 boards
...
- metro esp32s2
- feather esp32s2
- magtag 29" gray
2021-02-01 15:16:38 +07:00
hathach
8e954a4391
added enumerate walkaround for RP2040-E5
...
- PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
- target linke pico_fix_rp2040_usb_device_enumeration
2021-02-01 13:37:37 +07:00
hathach
ba69da1d8f
add support for LOG=2
...
LOGGER=rtt is not tested since jlink doesn't support rp2040 just yet
2021-01-29 11:24:05 +07:00
hathach
4fef2ddb4c
rp2040 move uart id to board specific
2021-01-27 16:37:31 +07:00
hathach
e230d683ca
add copy-artifact target, and add uf2 for all family board
2021-01-26 21:19:14 +07:00
hathach
4a0f5cbd63
change output filename to BOARD-Directory
2021-01-26 12:46:24 +07:00
Ha Thach
045674745a
Merge pull request #604 from kamtom480/spresense-sdk-2.0.2
...
Update Spresense SDK and fix dcd issues
2021-01-25 22:55:46 +07:00
hathach
aabf02fe29
add adafruit feather, itsy bitsy and qt rp2040
...
not tested, purely based on schematic
2021-01-25 17:23:33 +07:00
Kamil Tomaszewski
36064e3d7d
Update Spresense SDK to 2.0.2
2021-01-25 10:54:39 +01:00
hathach
83614418b5
get all device example build with rp2040 (except freeRTOS)
2021-01-25 13:28:23 +07:00
hathach
959a94b98d
rp2040 audio_test compile
2021-01-24 00:44:17 +07:00
hathach
ffad6eaf80
cmake esp32s2 and rp2040 getting along
2021-01-24 00:22:23 +07:00
hathach
cdd1c45306
improve ci for esp32s2
2021-01-23 18:09:57 +07:00
hathach
c58c8c4229
rp2040 cdc_msc work well
2021-01-23 00:59:50 +07:00
hathach
a780a8762b
rp2040 better support multiple boards
2021-01-23 00:32:14 +07:00
hathach
b8847de802
get board_test running with pico on both led and button
2021-01-23 00:12:10 +07:00
hathach
b6e9c42b02
update cmake build to work with esp32s2 and rp2040
2021-01-22 14:58:32 +07:00
hathach
0cf2b02791
Merge branch 'master' into group-boards-into-family
2021-01-22 11:17:10 +07:00
Ha Thach
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
graham sanderson
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
kkitayam
d7cfd8b91d
replaced variable name to CMDEXE from UNAME.
...
removed the rule that .d files are converted to .P files.
2021-01-14 01:19:43 +09:00
hathach
4f41501fc7
move luna into samd21 group
2021-01-13 16:59:55 +07:00
hathach
4b2714acb2
clean up
2021-01-13 16:50:28 +07:00
hathach
75c58e08e5
add f746nucleo to group f7
2021-01-13 16:41:00 +07:00
hathach
6eba383009
add f746disco into f7 group
2021-01-13 16:34:42 +07:00
hathach
39d2c219b5
add stlinkv3mini to f7 group
2021-01-13 15:52:54 +07:00
hathach
fecad9bab4
add stm32f769disco into f7 family
2021-01-13 14:17:15 +07:00
hathach
e252fade2c
add f767nucleo to stm32f7 group
2021-01-13 13:46:21 +07:00
hathach
55566bb188
adding stm32f7 family
2021-01-13 13:20:09 +07:00
kkitayam
fc69dd70cf
Changed some source file paths for SRC_C to relative paths.
...
Added statements to validate GCCVERSION on Windows Command Prompt.
2021-01-12 01:02:17 +09:00
Greg Steiert
f4300afb1c
moving sct neopixel driver to shared library
2021-01-10 18:31:40 +00:00
Greg Steiert
5ca7c285f5
moved neopixel to its own files with additional features
2021-01-10 05:17:49 +00:00
Greg Steiert
0f11858b0e
working neopixel minor refactor
2021-01-03 23:26:54 +00:00
Greg Steiert
33f0d4b314
working neopixel
2021-01-03 23:01:18 +00:00
Greg Steiert
f44c588dd7
8 state implementation, still not working
2021-01-03 18:53:55 +00:00
Greg Steiert
7f98d11454
24 state implementation, only upsdates first LED
2021-01-03 18:31:45 +00:00
Greg Steiert
06642910f4
neopixel driver one byte at a time non-func
2021-01-03 18:11:13 +00:00
Greg Steiert
56acdf67ba
adding double_m33_express board
2021-01-02 22:53:15 +00:00
kkitayam
2bbfc56bd8
added support for frdm_kl25z
2020-12-18 00:07:50 +09:00
hathach
e9e3000ff9
clean up
2020-11-30 09:41:01 +07:00
hathach
0dd78aa916
group all stm32f4 boards
2020-11-29 22:48:21 +07:00
hathach
daf9d06c0e
move teensy 4.0 to imxrt
2020-11-29 20:44:35 +07:00
hathach
2dec21f81b
complete grouping imxrt boards
2020-11-29 20:41:30 +07:00
hathach
89205438c2
move xiao to samd21 group
2020-11-29 17:09:53 +07:00
hathach
a6c7467fd3
grouping samd51 boards
2020-11-28 12:10:29 +07:00
hathach
a3fff24fbc
group more nrf board
2020-11-28 11:54:53 +07:00
hathach
50977eef0e
grouping more samd21 boards
2020-11-28 11:45:24 +07:00
hathach
fac9151c73
grouping samd21
2020-11-28 11:11:55 +07:00
hathach
630692d81b
move all nrf boards into its family group
2020-11-28 10:48:44 +07:00
hathach
f0ffe7b984
group more nrf52840 boards
2020-11-28 01:06:10 +07:00
hathach
658194ccc4
group more nrf boards
2020-11-28 00:45:44 +07:00
hathach
4130c50b01
grouping nrf boards
2020-11-28 00:16:28 +07:00
hathach
b572983cc8
group esp32s2 board into its group
2020-11-27 22:31:47 +07:00
hathach
496c7c701a
fix ci
2020-11-09 01:23:19 +07:00
hathach
7ab3da1e03
same70 xplained uart via edbg work with board_test
2020-11-09 01:01:05 +07:00
hathach
89b92b54a7
same70 xplained led and button works wiht board_test example
2020-11-09 00:13:56 +07:00
hathach
5456afa8ee
update microchipo driver submodule
2020-11-08 18:09:53 +07:00
Ha Thach
a708ab6254
Merge pull request #553 from hathach/host-async-control
...
Host async control
2020-11-07 10:52:14 +07:00
hathach
958a4e1b5d
use same51 driver to adafruit asf4 submodule
2020-11-02 15:44:12 +07:00
hathach
a6efe475e7
use cmsis 5 for all stm32
2020-10-30 14:14:28 +07:00
hathach
6e7f2064cf
add more stm mcu
2020-10-30 14:05:01 +07:00
hathach
3b890d2391
l4 use offical st driver repo
2020-10-30 14:01:05 +07:00
hathach
ac231d7b2d
l0 use offical st driver repo
2020-10-30 13:40:20 +07:00
hathach
3659d8e89a
h7 use offical st driver repo
2020-10-30 13:28:14 +07:00
hathach
b9ca7e91df
f7 use offical st driver repo
2020-10-30 13:20:09 +07:00
hathach
1e02f6e066
f3 use offical st driver repo
2020-10-30 13:11:23 +07:00
hathach
bbcf2d7e01
f2 use offical st driver repo
2020-10-30 13:01:01 +07:00
hathach
8850ea90b4
f1 use offical st driver repo
2020-10-30 12:55:54 +07:00
hathach
092f7baec0
random clean up
2020-10-30 12:49:43 +07:00
hathach
41a36b1256
f0 use offical st driver repo
2020-10-30 12:48:34 +07:00
hathach
e4eb2de401
f4 use offical st driver repo
2020-10-30 12:15:04 +07:00
Peter Lawrence
042ca2375e
bsp: atsamd21_xpro: removed no longer needed workaround
2020-10-14 09:15:26 -05:00
Peter Lawrence
e10358bfab
bsp: add ATSAMD21-XPRO eval board
2020-10-11 12:06:15 -05:00
hathach
b5d4c8185d
Merge branch 'master' into host-async-control
2020-10-11 16:22:12 +07:00
Ha Thach
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
Niklas Hauser
7fda95f508
Remap USB IRQs on STM32F303 BSP
2020-10-11 09:27:43 +02:00
hathach
89bf4fa04c
Merge branch 'master' into house-keeping
2020-10-09 13:49:05 +07:00
hathach
344d589a35
use pyocd for iMXRT boards
2020-10-09 13:48:08 +07:00
Ha Thach
6f8d0d2c34
Merge pull request #531 from majbthrd/mimxrt1010stack
...
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-09 00:48:08 +07:00
hathach
e8b3af038e
add flash-pyocd support
2020-10-08 17:19:48 +07:00
hathach
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
Ha Thach
30c23719f6
Merge pull request #528 from jgressmann/port-atsame51-to-tinyusb
...
Adds files for the open source D5035-01 hardware
2020-10-08 13:46:41 +07:00
Peter Lawrence
ed94e944c9
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-07 13:15:58 -05:00
Jean Gressmann
3295b5692b
D5035-01 bsp: fix typo
2020-10-07 19:27:55 +02:00
Jean Gressmann
f02b5bfdfa
Address various issues raised by TinyUSB maintainers
...
- remove OPT_MCU_SAME51 in favor of OPT_MCU_SAME5X and working around
differences in the Atmel bsp locally in the D5035-01 bsp.
- rename board folder to d5035_01 for consistency with other boards
2020-10-07 19:19:30 +02:00
hathach
d407341d1e
fix usb pin config with idf latest
2020-10-07 19:15:53 +07:00
Jean Gressmann
f92fe1e23e
D5035-01: more natural Makefile variable use
2020-10-06 17:39:36 +02:00
Jean Gressmann
1730a5dcba
D5035-01 bsp: fix paths, default to hw rev 1 (automated build)
2020-10-05 20:30:04 +02:00
Jean Gressmann
61aacf07d6
Adds files for the open source D5035-01 hardware
...
The board's files are here:
https://github.com/RudolphRiedel/USB_CAN-FD
2020-10-05 18:35:35 +02:00
hathach
15ad585e67
replacing hcd_pipe_xfer by usbh_edpt_xfer
2020-09-06 11:49:00 +07:00
hathach
10d5dac913
update doc
2020-09-04 11:20:09 +07:00
hathach
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
hathach
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
hathach
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
hathach
c7d2d0ae29
ohci work, tested with lpc1769
2020-09-02 01:40:04 +07:00
hathach
52b5748e8d
fix ci build
2020-09-02 00:56:43 +07:00
hathach
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
hathach
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
hathach
f4e3c6fd8e
clean up
2020-09-01 17:12:31 +07:00
hathach
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
hathach
7a443d6bea
add itsybitsy nrf52840 board support
2020-08-27 16:40:24 +07:00
hathach
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
Katherine Temkin
91f7ce9769
add support for SAMD11 devices / add samd11_xplained board
2020-08-21 13:15:07 -06:00
hathach
76fe8ac612
fix samg55 ci build
2020-08-21 12:19:38 +07:00
hathach
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
Ha Thach
798fad397a
Merge pull request #464 from hathach/improve-highspeed
...
Better support highspeed mode
2020-07-19 13:24:57 +07:00
hathach
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
Kate Temkin
9181ce55fb
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-14 21:51:31 -06:00
hathach
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
Uwe Bonnes
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
Uwe Bonnes
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
Uwe Bonnes
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
Uwe Bonnes
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
Uwe Bonnes
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
hathach
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
hathach
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
Uwe Bonnes
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
hathach
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
hathach
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
Ha Thach
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
hathach
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
hathach
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
hathach
0477446224
more clean up
2020-06-30 16:31:59 +07:00
hathach
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
Uwe Bonnes
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
Uwe Bonnes
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
Uwe Bonnes
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
hathach
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
hathach
2dff40236c
add kaluga files
2020-06-29 18:40:23 +07:00
hathach
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
Jerzy Kasenberg
8e143fc962
Add board support for Dialog DA1469x-dk-pro
...
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00
hathach
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
hathach
0bfa839ac0
clean up, update other example config
2020-06-15 23:06:17 +07:00
hathach
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
hathach
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
hathach
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
hathach
e0490ae786
fix idf usb pin init changes
2020-05-29 13:06:33 +07:00
hathach
227bffe04b
adding h743 uart, but not enabled yet since it conflict with OTG_FS2
2020-05-27 01:14:52 +07:00
hathach
0482f0d686
update h743eval with rhport=1 highspeed
2020-05-26 22:15:00 +07:00
hathach
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
hathach
62a746bdc7
wip
2020-05-26 12:18:36 +07:00
hathach
ba9c774a2a
board test work fine
2020-05-23 13:29:30 +07:00
hathach
4c01099a3d
update makefile to build with ohci host
...
update ses project for lpc1769 with rtt
2020-05-22 20:57:52 +07:00
hathach
f308990ab5
Merge branch 'master' into update-host
2020-05-22 15:28:22 +07:00
hathach
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
hathach
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
hathach
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
Mark Olsson
3c43009278
Add support for stm32f746nucleo board
2020-05-15 10:23:01 +02:00
Jerzy Kasenberg
615369a6eb
stm32l476disco: Fix system clock setup
...
Code suggested that PLL with MSI is used resulting in 80MHz clock.
When in fact PLL was not configured and system clock was left at MSI 48MHz.
This happens because PLL configuration requires that SysTick interrupt
has interrupt priority level configured correctly.
As it seems ST code intentionally setups variable uwTickPrio to invalid
value and later when it is not setup by user code configuration
of oscillator will fail before PLL is configured.
This simple changes systick priority to some valid value that
allows clock to use PLL.
2020-05-06 15:13:55 +02:00
Jerzy Kasenberg
d9e534f6f2
stm32l476disco: fix uninitialized filed usage
...
Field PLLState was not initialized in RCC_OscInitStruct.PLL in
function SystemClock_Config().
Value is used in HAL_RCC_OscConfig() regardless of oscillator.
In lucky case value would be 0 RCC_PLL_NONE and nothing would
happen.
If value was incorrect following line would end up in assert:
assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
If value was valid but no RCC_PLL_NONE pll could be configured
with some other random values.
Setting PLLState to RCC_PLL_NONE eliminates potential problem.
2020-05-06 14:25:46 +02:00
hathach
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
hathach
4a3a448340
clean up things, add makefile for host example
2020-05-04 00:29:52 +07:00
hathach
9538ca7d74
add uart for mcb1800
2020-05-03 14:50:12 +07:00
hathach
94fed7db0e
fix esp32 ci adding FREERTOS STATIC to sdkconfig default
2020-04-29 11:31:04 +07:00
hathach
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
hathach
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
hathach
afc4042375
add LOGGER option to use rtt
...
update example readme for debug log. Update bug template to ask for LOG
as well.
2020-04-22 17:08:41 +07:00
hathach
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
Ha Thach
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
hathach
989cca5b1a
update per review
2020-04-17 09:29:02 +07:00
hathach
bb2669fbc0
add dfu generate target for fomu
2020-04-16 22:24:48 +07:00
hathach
a009775745
dcd disconnect/connect for transdimension ip
2020-04-16 16:56:16 +07:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
hathach
d8d5902ccb
change saola-1 led to pin 18 by default
2020-04-10 15:44:50 +07:00
hathach
cefbd9579c
add neopixel led strip driver for saola, make saola as an component
2020-04-09 11:02:16 +07:00
hathach
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
hathach
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
hathach
fc9170b2c1
clean up
2020-04-08 15:15:52 +07:00
hathach
70df1aff13
add TODO for saola on-board neopixel
2020-04-08 15:00:16 +07:00
hathach
a2dee7fb50
rename saola to saola_1
2020-04-07 23:07:25 +07:00
hathach
6a9f971882
add saola button pin support, esp32 build with board_test
2020-04-07 13:42:48 +07:00
hathach
a344427e3f
fix CROSS_COMPILE for esp32s2
2020-04-06 20:39:20 +07:00
hathach
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
hathach
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
hathach
748cc88769
add saola board.mk
2020-04-03 12:20:06 +07:00
hathach
19f977a274
add esp32s2 saola bsp
...
update cdc_msc_freertos main.c to work with esp32s2
add CMake file
2020-04-01 20:24:46 +07:00
Ha Thach
a582674b91
Merge pull request #312 from hathach/develop
...
house keeping work
2020-03-29 00:40:36 +07:00
Nathan Conrad
3926b28faa
Update UARTs for stm32f4xx discovery boards. Other minor cleanups.
2020-03-28 12:05:30 -04:00
hathach
ad2824df8b
add ENTRY(Reset_Handler) to linker of samd21 and samd51 board
...
fix #303
2020-03-28 22:25:07 +07:00
Nathan Conrad
4191363c55
Update F4 BSP with new HAL config
2020-03-28 10:58:36 -04:00
Nathan Conrad
07c1ce76b8
Update F3 BSP for new HAL
2020-03-28 10:58:36 -04:00
Nathan Conrad
62a68034d9
Update F0 BSP for new HAL
2020-03-28 10:58:36 -04:00
hathach
1712b61ab6
added Arduino Nano 33 BLE with/without Sense
2020-03-28 21:34:42 +07:00
hathach
69698ed2e0
Merge branch 'master' into develop
2020-03-28 15:31:39 +07:00
Nathan Conrad
705d43cda7
Modify include of HAL, and remove CMSIS clock configuration code, and implement UART for STM32F407Disco
2020-03-26 10:10:06 -04:00
hathach
d74a92bf45
makefile clean up
...
allow board to define CROSS_COMPILE (default to arm gcc)
2020-03-25 14:06:51 +07:00
Ha Thach
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
Ha Thach
f2b761fee9
Merge pull request #306 from jeremyherbert/master
...
add support for seeeduino xiao
2020-03-24 14:37:38 +07:00
Jeremy Herbert
01820061b2
add support for seeeduino xiao
2020-03-23 23:39:53 -07:00
Ha Thach
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
William D. Jones
7e78e47444
msp_exp430f5529lp: Fix board.mk, remove .travis.yml.bck.
2020-03-24 00:40:25 -04:00
William D. Jones
27efedc9e6
msp_exp430f5529lp: Allow user to choose mspdebug as alternate programmer.
2020-03-23 23:45:22 -04:00
hathach
905c4b71d1
nrf use new cmsis_4 submodule for core header
2020-03-24 08:51:11 +07:00
hathach
056d0bb4bf
remove -Wnested-externs since many driver does this including CMSIS_5
2020-03-23 22:52:59 +07:00
hathach
9e0ffbe30f
house keeping
2020-03-23 22:51:17 +07:00
Nathan Conrad
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
hathach
acbb535668
change msp430 flash tool from mspdebug to TI MSP430Flasher
2020-03-22 19:11:24 +07:00
hathach
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
hathach
45e32a787b
clean up
2020-03-11 14:13:34 +07:00
hathach
5fa1e6e242
hack to undef LITTLE_ENDIAN for samg55
2020-03-11 12:32:29 +07:00
hathach
ba74223c2e
fix more build
2020-03-11 00:58:28 +07:00
hathach
6a1416d18a
fix cortex M7, M23, M33 freertos build
2020-03-11 00:47:13 +07:00
hathach
487b887f80
freertos demo use static only for most optmized sram
2020-03-11 00:09:37 +07:00
hathach
65578dec44
update freertos example
...
work with samd21 samd51 and nrf
2020-03-10 23:16:09 +07:00
Ha Thach
41d9ab5056
Merge pull request #295 from hathach/develop
...
add webserver into ci build
2020-03-10 14:33:26 +07:00
hathach
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
hathach
85a3315a99
Adding lwip_webserver to ci
...
- buil_al.py skip specific MCU if .skip.MCU_ exists
- reduce stm32f070 heap & stack size to compile webserver
2020-03-09 15:51:29 +07:00
hathach
b638aabad8
add uart for feather nrf52840
2020-03-08 13:25:14 +07:00
hathach
659fc4f29e
added itsybitsy m0, m4
2020-03-07 18:26:39 +07:00
hathach
bdc5e3d3bc
added feather sense and CLUE
2020-03-07 18:02:54 +07:00
hathach
3ea95c2ab6
clean up LD_FILE using $(BOARD)
...
make it easier to duplicate bsp
2020-03-07 17:49:30 +07:00
hathach
800330cdf0
added feather nrf52840 sense
2020-03-07 17:27:59 +07:00
Peter Lawrence
6ab799c7eb
atomic GPIO operation in BSP
2020-02-11 14:34:07 -06:00
Peter Lawrence
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
Peter Lawrence
a8e66f0111
added CFG_EXAMPLE_MSC_READONLY to NuTuny-SDK-NUC120 board.mk
2020-01-25 13:32:31 -06:00
Peter Lawrence
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
hathach
0c1fff735d
skip nuc flash verify
2020-01-14 18:19:33 +07:00
hathach
4de9439fb1
more nuvoton support
...
- add LED for nutiny nuc 121, 125s, 126v
- flash target to use nuvoton's openocd fork
2020-01-14 18:13:42 +07:00
Peter Lawrence
64b435cf6e
correct apparent Adafruit typo in SAMD21 board.mk
2020-01-11 18:25:38 -06:00
hathach
43eff66d40
add raytac mdbt50q rx dongle
2020-01-10 16:51:24 +07:00
hathach
82c2674b19
clean up
2020-01-10 15:22:45 +07:00
hathach
287d45155d
added stm32f401 blackpill
2020-01-10 15:19:33 +07:00
hathach
4494720dbc
clean up HSE_VALUE for stm32
2020-01-10 15:14:37 +07:00
hathach
04cf337b79
clean up flash-stlink
2020-01-10 15:09:59 +07:00
hathach
dd6313a6ca
added stm32f411 blackpill
2020-01-10 00:28:46 +07:00
hathach
84bbe54e17
follow up to #261
...
- fix button pullup
- flash using teensy_loader_cli
- update boards.md
2020-01-09 22:04:11 +07:00
Lady Ada
8ead416865
add a rough bsp. UART on D0/D1, LED on D13, button on D12
2020-01-09 00:59:48 -05:00
hathach
8aef8d4b85
fix ci build
...
- nuc 121/125: add CFG_EXAMPLE_MSC_READONLY since it is not enough SRAM
to hold MSC disk
- nuc 126: drop i2c source files in compile list due to SDK driver
issue.
2020-01-07 16:57:18 +07:00
Ha Thach
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
Peter Lawrence
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
Ha Thach
97c216bc04
Merge pull request #257 from gsnxp/rt1010fix
...
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2020-01-01 13:35:36 +07:00
Greg Steiert
e06f4a3ffe
fixed build issue with i.MXRT1010-EVK, corrected typo in examples/readme
2019-12-30 09:11:52 -08:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
94e70f9b01
Merge branch 'master' into port-samg55
2019-12-21 23:53:48 +07:00
Ha Thach
0b540fa55d
Merge pull request #234 from hathach/stm32f4-blackpill
...
move VBUS sense out of dcd_synosys to bsp
2019-12-12 10:00:17 +07:00
hathach
88bdb12ee5
close #204 define HSE_VALUE in _hal_conf instead of board.mk
2019-12-11 15:19:51 +07:00
hathach
96a9eca6a0
move VBUS sense out of dcd_synosys to bsp
2019-12-11 14:03:36 +07:00
hathach
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
hathach
4c9c13c767
add uart sync support
2019-11-26 18:21:46 +07:00
hathach
387384c0d9
fix samg55 with newlib missing end symbol
2019-11-26 17:39:51 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
Ha Thach
64b05a1d5f
Merge pull request #225 from xobs/fomu-offset-fix
...
bsp: fomu: fix rom address for example programs
2019-11-24 11:18:53 +07:00
Sean Cross
a106c5114b
bsp: fomu: fix rom address for example programs
...
During development, the ROM address was at offset 0x2001a000
(due to the fact that the test program was located immediately
following the bitstream).
In normal Fomus, the ROM address is at offset 0x20040000, in order
to take into account additional bitstreams and bootloaders.
Correct the address to the offset in order to get examples working
with existing Fomus.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-24 01:15:31 +00:00
hathach
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
hathach
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
d1d8ded43b
added iMX RT1060 EVK board support
...
board_text, cdc_msc, hid_composite all work
2019-11-22 17:36:04 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
hathach
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
636c1475ba
clean up
2019-11-22 12:38:24 +07:00
hathach
627d9a2b33
adding irq to rt1064evk
2019-11-22 00:34:31 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
hathach
54d597b723
rt1064evk led, button, uart all work
2019-11-20 17:10:30 +07:00
hathach
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
hathach
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
Sean Cross
679821e917
fomu: bsp: don't call usb isr when usb is disabled
...
When compiled without usb support, we don't want to call the USB ISR.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:10:37 -08:00
Sean Cross
67267a9399
fomu: bsp: remove unused messible functions
...
These functions are unused in the current implementation.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 11:08:56 -08:00
Sean Cross
8c5f02960b
valentyusb: rename from `foosn`
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
25d5628063
fomu: csr: sync csr
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
f087cb1580
fomu: crt0: minor text refactor
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
77cf0b5bfd
fomu: csr: add version with next_ev register
...
The Fomu bitstream now includes a `USB_NEXT_EV` register to
indicate which is the next logical event to process. Add this
register to the CSR definition.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
83bca4a74f
fomu: semi-working commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:01 -08:00
Sean Cross
ef07427e06
bsp: fomu: update
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:13 -08:00
Sean Cross
ba889eeb9e
bsp: fomu: fix linker script overlap
...
The end of the data section was overlapping the start of the bss.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
Sean Cross
f152bed4b4
fomu: initial commit
...
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:03:12 -08:00
hathach
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
hathach
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
hathach
d65bc34bfe
added and tested nRF52833DK (pca10100)
2019-11-11 00:11:49 +07:00
hathach
4008f0d1e6
update dcd nrf5x to be indepent from nrf_usbd.h
...
fix build error with nrfx 2.0
2019-11-11 00:01:12 +07:00