add link to MDR
This commit is contained in:
parent
c8f33d785d
commit
5162c29607
|
@ -107,6 +107,9 @@ MDR
|
|||
---
|
||||
|
||||
The MDR is a MegaCode receiver which can activate the gate motors if the right code is received.
|
||||
Product page: http://www.linearcorp.com/product_detail.php?productId=941
|
||||
Manual: http://www.linearcorp.com/pdf/manuals/MDR_MDR-2_MDRM.pdf
|
||||
|
||||
Codes can be programmed in the receiver by pressing the "learn" button and activating the remote, which will transmit the signal.
|
||||
The device requires a 24V power source, but it can go down to 17V.
|
||||
|
||||
|
@ -128,6 +131,9 @@ A LM78L05ACZ voltage regulator will provide 5V for the logic, except the relay.
|
|||
The PICkit2 does not provide enough current to power the logic, but a USB port does.
|
||||
|
||||
The MDR-U is a more compact and semi-SMT version of the MDR.
|
||||
Product page: http://www.linearcorp.com/product_detail.php?productId=942
|
||||
Manual: http://www.linearcorp.com/pdf/manuals/MDRU.pdf
|
||||
|
||||
It plugs in a wall socket instead of requiring 24V.
|
||||
Beware, the neutral blade is used as GND on the board.
|
||||
Do not connect an oscilloscope earth to the PCB ground as you will short the mains.
|
||||
|
|
Loading…
Reference in New Issue