From 5162c296077b2a1fe3b56607b403521322532be0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?King=20K=C3=A9vin?= Date: Sun, 3 Aug 2014 14:09:50 -0700 Subject: [PATCH] add link to MDR --- README.md | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/README.md b/README.md index b384455..e141408 100644 --- a/README.md +++ b/README.md @@ -107,6 +107,9 @@ MDR --- The MDR is a MegaCode receiver which can activate the gate motors if the right code is received. +Product page: http://www.linearcorp.com/product_detail.php?productId=941 +Manual: http://www.linearcorp.com/pdf/manuals/MDR_MDR-2_MDRM.pdf + Codes can be programmed in the receiver by pressing the "learn" button and activating the remote, which will transmit the signal. The device requires a 24V power source, but it can go down to 17V. @@ -128,6 +131,9 @@ A LM78L05ACZ voltage regulator will provide 5V for the logic, except the relay. The PICkit2 does not provide enough current to power the logic, but a USB port does. The MDR-U is a more compact and semi-SMT version of the MDR. +Product page: http://www.linearcorp.com/product_detail.php?productId=942 +Manual: http://www.linearcorp.com/pdf/manuals/MDRU.pdf + It plugs in a wall socket instead of requiring 24V. Beware, the neutral blade is used as GND on the board. Do not connect an oscilloscope earth to the PCB ground as you will short the mains.