4f6e770eda
add more warning option, also fix -Wconversion with rp2040
...
-Wuninitialized, -Wunused, -Wredundant-decls
2022-06-24 19:46:19 +07:00
4639cac85c
Merge pull request #1526 from ccrome/chc-add-teensy-41
...
Added The Teensy 4.1 board
2022-06-22 11:22:44 +07:00
4a9fe813a8
Update USBTMC descriptors to support high speed, set USB version to 2.0.0 for all cases.
2022-06-21 22:31:09 -04:00
e9c29e6a2d
Update USBTMC driver to support dynamic packet sizes (based on descriptor).
2022-06-21 21:27:52 -04:00
742b99f689
Added The Teensy 4.1 board
...
The Teensy 4.1 board has an 8MB W25Q64JV as opposed to the 2MB flash
on the Teensy 4.0. This largely doensn't matter for TinyUsb, except
when you attempt to access any memory in the flash above the 2MB
boundary, when it fails with a hard fault.
2022-06-21 11:12:39 -07:00
070382d599
Merge pull request #1509 from liamfraser/rp2040_hcd_improvements
...
RP2040 HCD Improvements (Hub + Keyboard + Mouse working)
2022-06-21 15:55:02 +07:00
ae8b8f0c93
Merge pull request #1515 from maddyaby/dcd_edpt_close
...
Stub out dcd_edpt_close for samd
2022-06-18 12:40:39 +07:00
b4e62d1cda
Merge pull request #1518 from mingpepe/master
...
Fix typo for log format
2022-06-18 12:39:16 +07:00
2f7f3e604e
Re-add some warning suppression for rp2040
2022-06-17 12:54:28 -05:00
d09d0b3147
Merge pull request #1519 from kilograham/rp2040_shared_handler
...
rp2040: use shared IRQ handlers, so user can also hook the USB IRQ
2022-06-17 22:17:42 +07:00
c45118dacf
rp2040: use shared IRQ handlers, so user can also hook the USB IRQ
2022-06-17 09:13:40 -05:00
1001d2da40
Fix typo for log format
2022-06-17 16:50:24 +08:00
e0d7c16788
Merge pull request #1516 from hathach/fix-example-with-highspeed
...
correct bulk size for highspeed endpoint in dynamic_configuration and usbtmc exmaples
2022-06-17 15:11:55 +07:00
905a0b2457
correct bulk size for highspeed endpoint in dynamic_configuration and usbtmc exmaples
2022-06-17 14:37:35 +07:00
05fc2fa7a6
Stub out dcd_edpt_close for samd
...
Not having this prevents the device from finishing the mounting process.
Tested on a SAMD51 and didn't seem to need to actually do anything in the close function.
2022-06-16 16:57:20 -07:00
e9089b993f
Fix typo in audiod_rx_done_cb in audio_device.c
2022-06-16 16:22:55 -07:00
80121303eb
Merge pull request #1512 from kilograham/make_ram_code_optional
...
rp2040: make moving 1K of code into RAM optional - and off by default
2022-06-16 23:30:29 +07:00
c5ba4af25b
rp2040: make moving 1K of code into RAM optional - and off by default
2022-06-16 11:04:48 -05:00
d7b579a978
Merge pull request #1480 from Ryzee119/multihub_rebase
...
Host: Add support for multi-level usb hubs
2022-06-16 16:33:48 +07:00
2036a0b62a
update readme
2022-06-16 14:41:10 +07:00
f4a7b5b80c
add note for recursive calls of process_device_unplugged() in case of hub
2022-06-16 14:37:57 +07:00
19d054f789
hcd_rp2040 improvements:
...
- Stall now has priority over other interrupt responses
- Delete eunused hcd_edpt_busy
- Assert !ep->active when trying to start a new xfer
- Assert !ep->active when handling buff_status bits
- Set ep->xferred_len to 8 once a setup packet is finished so the data
structure is accurate
2022-06-13 16:19:11 +01:00
eb7d359efc
Merge pull request #1506 from hathach/more-dynamic-rhport
...
more dynamic controller for host
2022-06-10 15:24:26 +07:00
040ef0640d
more dynamic controller for host
2022-06-10 14:53:03 +07:00
96fecedabe
Merge pull request #1505 from hathach/revert-sof-rename
...
revert sof_isr driver rename since it cause issue with existing code
2022-06-10 12:00:42 +07:00
8451d05c50
revert sof_isr driver rename since it cause issue with existing code
...
also removed commented tud_sof_isr_set() API
2022-06-10 01:45:48 +07:00
806806d61b
Merge pull request #1501 from hathach/more-rp2040-ramfunc
...
make all hcd/dcd function used in isr into ram
2022-06-08 17:29:19 +07:00
dd035b0eb2
make all hcd/dcd function used in isr into ram with __no_inline_not_in_flash_func() for faster irq handling
...
result is 1KB of code moved from rom -> ram
2022-06-08 16:08:53 +07:00
8c4b142b9e
Merge pull request #1498 from hathach/add-tuh_config-port-specific-setup
...
add tuh_configure() for port/dynamic host behavior config
2022-06-08 15:36:37 +07:00
8cbc34de11
add tuh_configure() for port/dynamic host behavior config
2022-06-08 01:17:01 +07:00
896c707cd4
Merge pull request #1496 from hathach/rp2040-sof-fastfunc
...
add TU_ATTR_FAST_FUNC for audio sof isr call chain
2022-06-07 13:38:26 +07:00
06392247eb
add TU_ATTR_FAST_FUNC for audio sof isr call chain
2022-06-07 11:50:50 +07:00
a03a03d74e
Merge pull request #1495 from hathach/enhance-tusb-config
...
Better support multiple controllers configuration
2022-06-07 01:13:08 +07:00
7c8278303b
update all host examples
2022-06-06 23:16:49 +07:00
9794a2b865
more example update
2022-06-06 22:41:04 +07:00
f4c80dd218
clean up example to use CFG_TUD_ENABLED + CFG_TUD_MAX_SPEED instead of CFG_TUSB_RHPORT0_MODE
2022-06-06 17:35:17 +07:00
afd9b1883d
Merge pull request #1481 from cr1901/msp430-misopt-fix
...
msp430x5xx: Add fix for possible bug in msp430-elf-gcc 9.3.0.
2022-06-06 15:37:45 +07:00
1b08672945
more ci fix
2022-06-06 13:25:48 +07:00
7187cd9a85
fix ci, remove use of CFG_TUSB_RHPORT0_MODE in bsp
2022-06-06 12:51:10 +07:00
f626916a57
update all dwc2 ports to support new dynamic controller support
2022-06-04 23:52:12 +07:00
7df7590f7f
Hub: Remove multi-level hub bypass
2022-06-04 18:58:20 +09:30
31134f41a1
make dwc2 stm32 rhport support dynamic
2022-06-03 17:24:28 +07:00
2571211957
remove static port defined for device/host
2022-06-03 11:32:09 +07:00
8b37aa1579
nrf5x: Fix DMA access
...
There were two problems:
- dma_running flag could be checked in USB interrupt (not set yet) then higher priority
interrupt could start transfer, check dma_running (not set yet) set it to true start
DMA; then when USB interrupt continues it starts another DMA that is not allowed
- when DMA is started some registers can't be safely accessed, read can yield invalid
values (SIZE.EPOUT, SIZE.EPISO)
current implementation could start DMA for one OUT endpoint then check that another
endpoint also has data and while DMA was not started right away, SIZE.EPOUT was copied
already to MAXCNT register. Later on when DMA was started not all data was read from
endpoint due to incorrect DMA size previously set.
To prevent both cases dma_running is changed in atomic way.
Only code that actually set this value to true starts DMA, code that tried and
had dma_running flag already set simply defers DMA start to USB task.
This eliminates also need to have mutex that was there to limit access to dma_running flag
to one task only.
transfer also now has started flag that is set only after dcd_edpt_xfer() sets up total_len
and actua_len. Previously USB interrupt was disabled when total_len and actual_len were
setup to prevent race condition when data arrived to ednpoint before transfer was setup
was finished.
2022-06-02 17:23:35 +02:00
8b9cf152a0
rhport argument in usbd_ API() is not used (always use the initialized port)
...
remove the usage of TUD_OPT_RHPORT in class driver
2022-06-02 16:51:17 +07:00
99c1585ed2
rename board specific macro for example
...
- BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT
- BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
2022-06-01 23:53:40 +07:00
b6a8d0dd71
Merge pull request #1485 from tfx2001/patch-1
...
Fix compile error
2022-06-01 23:26:57 +07:00
54d7790e8b
fix compile error
2022-06-01 21:37:26 +08:00
d1d6bd2831
Merge pull request #1483 from hathach/clean-rp2040-net-example
...
remove cmake compile macro for net example (use lwipopts.h instead)
2022-06-01 16:17:46 +07:00
ea8a9e0249
remove cmake compile macro for net example (use lwipopts.h instead)
2022-06-01 15:10:05 +07:00
hathach