03d7988df3
add NCM driver in a compatible manner : hathach/tinyusb#550
2021-09-25 17:05:58 -05:00
c62c1433e7
usbd: Workaround for non standard device descriptor request
...
Windows and Linux host during enumeration requests device
descriptor with request size set to 64 bytes when device
was in default state (no address).
Those systems do not want 64 bytes though since usb descriptors is
only 18 bytes long so they silently expect that only one packet
will be received possibly 18 bytes for EPS > 16 or 8 or 16 bytes
for smaller EP0.
For devices with CFG_TUD_ENDPOINT0_SIZE size 8 or 16 there was
workaround that reduced request size to CFG_TUD_ENDPOINT0_SIZE
and that was enough to satisfy Windows and Linux hosts.
However USBCV testing application also requests device descriptor
but with size set to 18 bytes. Workaround for Window/Linux
prevented USBVC to tests devices with 8 bytes EP0 size since it
send only 8 bytes while application did wanted 18 bytes.
Solution that satisfies both cases it to check if in default state device
descriptor request wants more bytes than descriptor size (18).
If so host is expecting to receive less bytes then requested
and workaround would be applied since Linux/Windows only try
to read one packet.
If 18 bytes was requested as is the case for USBCV, core returns
descriptor in 2 or 3 packets as application expects.
2021-09-24 14:19:04 +02:00
ea595d3161
update dcd attr for mm32
2021-09-18 16:53:16 +07:00
2499c9382d
rpi start. doesn't work
2021-09-17 16:51:34 -07:00
0ded1c5bac
Reset EP flags on close.
2021-09-14 21:08:12 +02:00
a23944035d
correct assoc_itf_count for bth driver
2021-09-15 00:51:01 +07:00
b474522245
make vendor driver more flexible
...
- skip additional custom descriptor between interface and endpoints
- can have up to 2 bulk endpoint ( 1 in & 1 out)
2021-09-14 21:30:38 +07:00
25ea8f9c9e
update configuration parser
2021-09-14 21:02:38 +07:00
3639168066
Fix warning.
2021-09-14 11:58:22 +02:00
5404d6d8ae
usbd pre-compute total interface length without replying on driver open
2021-09-14 12:47:20 +07:00
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
f81368174b
add other speed descriptor callback tud_descriptor_other_speed_configuration_cb()
...
example implement tud_descriptor_device_qualifier_cb() and
tud_descriptor_other_speed_configuration_cb() on high speed device to
fully compliant to usbcv
2021-09-09 15:17:19 +07:00
d4c56c70a8
minor clean up
2021-09-01 20:01:40 +07:00
1398226bb5
only attempt to clear if stalled, and stall if cleared
2021-09-01 16:54:03 +07:00
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
90dc9bc289
revert previous changes, edpt stall also clear any pending (not complete) transfer
2021-09-01 12:42:45 +07:00
d047b28aa2
remove set/clear busy flag in set/clear stall since they are different status
...
note: dcd should resume to prio-stalled queued transfer when unstall
2021-08-31 17:39:54 +07:00
38f5aee9c3
Merge pull request #1058 from hathach/usbcv-compliant-test
...
nrf5x USB Compliance Verification Test suite
2021-08-30 17:31:50 +07:00
9394de6ae7
update msc driver to pass MSC BOT error recovery compliant test
2021-08-27 12:38:41 +07:00
2202845507
fix: bth stridx error
2021-08-27 10:58:38 +08:00
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
07adc26ce3
fix usbcv TD 9.4 Interface Descriptor test
2021-08-26 13:07:10 +07:00
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
beb1a5c678
minor clean up
2021-08-20 19:39:33 +07:00
1cef2b6a42
extra common edpt helper for device and host stack
...
tu_edpt_validate() and tu_edpt_bind_driver()
2021-08-20 18:01:10 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
9b869463dd
skipped suspend/resume if not connected
2021-08-17 17:00:53 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
d52b981c3a
revert ready() check in claim (do it later in separated PR)
2021-08-12 17:07:39 +07:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
7682829820
Add correct endpoint count for GD32VF103
...
This controller family only supports USB FS with four endpoints
2021-08-07 09:01:01 +02:00
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
b35ad6edcb
clean up max packet size endian
2021-07-22 17:04:55 +07:00
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
1c2bc47c07
Merge pull request #950 from HiFiPhile/dfu
...
DFU improvements
2021-07-22 11:17:01 +07:00
aff7b100ca
update dcd attr for samx7x
2021-07-22 00:28:37 +07:00
8ee1141a70
correct check
2021-07-22 00:12:01 +07:00
a9f3532252
more ci
2021-07-22 00:12:01 +07:00
37cac414f8
fix ci
2021-07-22 00:12:01 +07:00
a226dbaa4d
add dcd_attr for DCD_ATTR_ENDPOINT_MAX
...
could be useful with more dcd specific attribute
2021-07-22 00:12:01 +07:00
b194aa240b
Merge branch 'master' into dcd_same70
2021-07-17 12:10:35 +02:00
3960beece0
rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU
2021-07-15 20:52:58 +07:00
daca9e520b
wrap up DFU update
2021-07-15 20:47:50 +07:00
680b000bd1
simplify TUD_DFU_DESCRIPTOR with alternate count
...
remove CFG_TUD_DFU_ALT_COUNT since there is only one DFU functional
descriptor
2021-07-12 20:15:59 +07:00
2916cd4575
rename TUD_DFU_MODE_DESCRIPTOR to TUD_DFU_DESCRIPTOR
2021-07-12 18:51:57 +07:00
10a7e0502a
Merge branch 'dfu' of https://github.com/HiFiPhile/tinyusb into HiFiPhile-dfu
2021-07-12 17:50:11 +07:00
5b4b5ca533
Add bwPollTimeout set callback, postpone download callback after GETSTATUS
2021-07-08 00:25:12 +02:00
7e883e0f41
Refactor with one DFU functionnal descriptor
2021-07-07 19:01:00 +02:00
941b02c6a9
Reactor to one functional descriptor.
2021-07-07 18:02:04 +02:00
c2d8ed3fd1
Add alt settings support in DFU class.
2021-07-05 17:56:21 +02:00
6e9da70c18
Fix audiod_get_AS_interface_index in audio class.
...
Enhance uac2_headset example with multiple sample rates.
Add macro to calculate EP size.
2021-07-04 15:46:10 +02:00
ca98996e1f
better support for hid device set/get protocol
...
add caplock detection for hid_composite
2021-07-01 22:46:39 +07:00
cb0f1d98db
Merge remote-tracking branch 'origin/master' into CCRX_Port
...
# Conflicts:
# src/portable/renesas/usba/dcd_usba.c
# src/tusb_option.h
2021-06-29 00:19:30 +02:00
b9e9773d04
fix warning
2021-06-24 12:58:18 +02:00
51c6444e1d
final clean up
2021-06-22 23:49:24 +02:00
832d22d7ad
force single buffered for device mode, out endpoint
2021-06-17 01:55:35 +07:00
60d8ecbfe6
clean up
2021-06-11 22:36:17 +02:00
1c23462b43
weak atrribute work around removed from CCRX_Port
2021-06-11 22:25:36 +02:00
c7f51cde40
implement usbh_edpt_busy (WIP), remove hcd_edpt_busy
2021-06-10 17:19:21 +07:00
13cb016042
add usbh_classdriver.h
2021-06-10 16:48:20 +07:00
5a554508ca
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-03 22:17:30 +02:00
b4f092ec74
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-05-29 21:23:39 +02:00
9736e54734
include clean up
2021-05-27 17:40:39 +07:00
c7cecf28c8
clean up
2021-05-27 00:16:45 +07:00
faa31152b4
rename usbd_edpt_iso_xfer to usbd_edpt_xfer_fifo
2021-05-26 20:34:06 +07:00
ce59d69520
Merge remote-tracking branch 'official/master'
2021-05-25 09:27:35 -04:00
4f03332118
clean up
2021-05-23 20:14:01 +07:00
40cd3a7e20
Merge branch 'master' into host-hid
2021-05-18 13:08:30 +07:00
db8ea7ea1c
clean up
2021-05-18 12:58:24 +07:00
791efecfdf
add tuh_device_ready()
2021-05-18 12:58:24 +07:00
3a7f8b3ac3
separte tusb_init/inited() to tud/tuh init/inited
...
add rhport to tud_init()
2021-05-18 12:58:24 +07:00
2666e1efec
add tuh_inited() and tud_inited()
2021-05-18 12:58:24 +07:00
05892a5a1e
Merge branch 'master' of github.com:xmos-jmccarthy/tinyusb
2021-05-06 12:18:55 -04:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
45e401e69d
Remove unused alt_setting
2021-04-22 16:42:54 -04:00
9ecb91e1bd
fix build with LOG=2
2021-04-15 23:47:28 +07:00
7b45b38fe4
Remove DFU mode and rt
2021-04-12 11:17:01 -04:00
2e2dc7bdc5
Revise per initial comments
...
Returns the RT driver to the function state of previous iteration, which
did not support the will_detach. Behavior should be fine without this
feature. This removes much of the added bloat to track state, and
handle requests in the APP_DETACH state which is no longer required.
Removes the optional bloat added to the RT driver, such as responding to
GETSTATE requests.
Fixes the DFU Mode to extract the attr bits from the functional
descriptor when opened.
Fixes some incorrect bitwise if checks.
Also, updates some naming of functions to be consistent with the rest of
the library.
2021-04-07 17:05:04 -04:00
c39b7b8177
Add DFU runtime and mode "class"
...
With the runtime and mode portions in separate classes, a single
application should only be building with one or the other enabled. In
some applications both might be desired at build time.
The CFG_TUD_DFU_RUNTIME_AND_MODE option creates a DFU class, which asks
the application which mode to initialize to. This allows a runtime
change between RT and DFU mode, by just reinitializing tusb.
2021-04-05 17:52:33 -04:00
bc2cb99780
Remove unreachable callback
2021-04-05 17:06:27 -04:00
c5b8ef1529
Separate DFU RT and Mode. Untested
2021-04-05 16:32:58 -04:00
9b2ddd9cc6
Generalize audio driver for 3 audio functions plus a lot more.
...
- Audio format and parameters are parsed from descriptors thus user no
longer needs to give them explicitely
- Tested for 4 channel software type I PCM encoding with 16 bit with 1
channel per FIFO and 2 channels per FIFO (this is I2S specific)
2021-04-03 09:49:27 +02:00
1138f8cc70
Add DFU Class per Version 1.1 Spec
2021-03-26 15:30:43 -04:00
a397353916
fix ci build with rp2040
2021-03-10 17:58:39 +07:00
794083b647
Merge branch 'master' into edpt_ISO_xfer
2021-03-10 17:10:49 +07:00
eeea19c0ab
usbd ack SET_INTERFACE if it is not implemented by class driver.
2021-03-10 11:33:03 +07:00
a655a4169e
add note for MIDI (audio v1.0) endpoint decriptor use 9 bytes instead of 7
2021-03-04 01:18:49 +07:00
68db108b35
Merge pull request #688 from duddie/master
...
Fix Endpoint descriptor size for MIDI Device
2021-03-04 01:10:37 +07:00
7b8a08d2e1
Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()
2021-03-02 20:00:39 +01:00
9d5e369170
rp2040 add disconnection detection
...
- also use dcd_event_bus_reset()
- Add TODO for suspend, resume later on (need to test with/without vbus
detection).
2021-03-02 23:24:36 +07:00
72c1066ed1
Fix Endpoint descriptor for MIDI Device
...
Endpoint descriptor should be 9 bytes in length (not 7) and have two extra bytes at the end: bRefresh and bSynchAddress
According to MIDI USB specification 1.0 (6.2.1 Standard MS Bulk Data Endpoint Descriptor)
2021-02-28 22:18:35 +08:00
cdf600048f
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-12 18:05:20 +01:00
04ab6b4082
Merge pull request #648 from hathach/rename-dfu-rt-to-runtime
...
Rename dfu rt to runtime
2021-02-11 15:29:55 +07:00
d4281291e5
Merge pull request #647 from hathach/correct-fs-bulk-epsize
...
more epsize checking per type
2021-02-11 12:36:19 +07:00
e12c25ec2c
rename dfu_rt to dfu_runtime for easy reading
...
also rename tud_dfu_rt_reboot_to_dfu to tud_dfu_runtime_reboot_to_dfu_cb
2021-02-11 12:05:22 +07:00
9812cfc6c6
clean up
2021-02-11 11:48:34 +07:00
919bb9ce38
more epsize checking per type
2021-02-11 11:45:24 +07:00
49bc97b0ca
remove the requirement of std SET/CLEAR_FEATURE must not return zlp status
2021-02-11 11:22:02 +07:00
bb2f93d427
prepare for release
2021-02-05 20:41:41 +07:00
Peter Lawrence