c427712449
dcd_da146xx: Handle only enabled interrupts
...
Not much of an improvement but handle only interrupts
that were enabled and are expected.
2021-09-23 14:12:50 +02:00
3e569f8e79
Merge pull request #1094 from kasjer/kasjer/da146xx-vbus-handling
...
dcd_da146xx: Add VBUS handling
2021-09-18 23:12:40 +07:00
3333703d25
Merge branch 'master' into zhangslice-master
2021-09-18 13:35:26 +07:00
2499c9382d
rpi start. doesn't work
2021-09-17 16:51:34 -07:00
6d8677a78a
dcd_da146xx: Add VBUS handling
...
DA146xx are Bluetooth devices that may be battery
powered and when not connected to USB host there
is no need for USB peripheral to be running.
This change allows to enable USB peripheral when
VBUS is present otherwise USB is down reducing
power consumption.
tud_vsub_changed() function must be called
whenever VBUS change was detected.
For bus-powered devices this function should be called
at startup since VBUS must be present while device
is working.
2021-09-17 12:10:17 +02:00
b363afc091
minor clean up
2021-09-17 00:46:29 +07:00
c65cc75c6b
use correct resume detection for kl25z
2021-09-17 00:44:39 +07:00
8dfe0898e7
minor update to dcd khci
2021-09-17 00:43:10 +07:00
fbe1bf375c
Fix stall interrupt handling
2021-09-15 21:39:02 +09:00
93ed3034c0
merge master and minor clean up
2021-09-15 18:35:52 +07:00
f39656b6d7
Merge branch 'master' of github.com:hathach/tinyusb into kkitayam-impl_close_all_for_khci
2021-09-15 18:29:28 +07:00
03866ddf9b
Merge pull request #1062 from HiFiPhile/fifo_dcd_transdimension
...
Improvements for dcd_transdimension
2021-09-15 16:07:06 +07:00
6d3fb7eb98
Merge pull request #1087 from HiFiPhile/nuc_wkp
...
NUC126: fix remote_wakeup
2021-09-14 11:40:55 +07:00
cdc63459eb
esp32sx implement dcd_remote_wakeup(), fully compliance to chapter9 test suite
2021-09-13 16:49:38 +07:00
e64bfb9ff5
implement dcd_edpt_close_all(), pass chapter9 test suite (without remote wakeup)
2021-09-13 16:16:37 +07:00
43e6555fd0
clean up
2021-09-13 13:09:38 +07:00
ce5db06ba0
clear PID along with clear stall
2021-09-13 12:05:49 +07:00
6feda5ae8f
Merge branch 'nuc_wkp' of https://github.com/HiFiPhile/tinyusb into HiFiPhile-nuc_wkp
2021-09-13 11:52:16 +07:00
9bed4e2e21
refactor nxp TDI dcd_edpt_xfer_fifo
2021-09-13 00:45:15 +07:00
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
5f141a4c13
Merge pull request #1077 from hathach/st-synopsy-compliance
...
St synopsy compliance
2021-09-08 18:00:44 +07:00
d077574097
reset PID to DATA0 when open endpoint
2021-09-08 17:56:22 +07:00
67e80f60e3
fix build with gd32vf103
2021-09-08 13:35:11 +07:00
4ac136d81d
implement remote wakeup for stm synopsys
2021-09-08 00:57:07 +07:00
a54a974fa5
make synopsys usbcv compliance
...
- implement dcd_edpt_close_all()
- reset dtoggle when open endpoint
- correct dev interrupt mask on bus reset
2021-09-07 23:02:57 +07:00
f3da48d46a
Implement dcd_edpt_close_all() for Renesas RX family
2021-09-07 23:28:54 +09:00
d6e9fe38be
rp2040 implement dcd_edpt_close_all()
...
aslo rename reset_ep0_pid() and clean up. We only need to reset pid when
setup packet received
2021-09-01 19:44:12 +07:00
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
ab0c3e8dd0
fix rp2040 chapter 9 TD 9.6 test
2021-08-31 17:41:08 +07:00
16b802d50c
add dcd_edpt_close and iso xfer.
2021-08-31 12:02:19 +02:00
864d8381a7
dcd_transmission xfer_fifo support.
2021-08-31 11:59:51 +02:00
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
ad21b69277
fix nrf clear data toggle sequence when clearing stall
2021-08-29 12:05:34 +07:00
66c292e2ec
fix a couple of nrf dcd issue
...
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
2021-08-29 00:34:21 +07:00
8bad0af849
explicitly clear stall and data toggle for edpoint upon open()
2021-08-27 22:31:08 +07:00
81c73c235f
implement dcd_edpt_close_all() for nrf52840
2021-08-27 22:30:30 +07:00
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
3309425211
sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB
...
separate dev0 from _usbh_devices pool to save sram
2021-08-23 19:56:53 +07:00
75cd593b60
add hcd_devtree_get_info()
...
remove usbh_hcd.h
2021-08-23 17:00:41 +07:00
a490a3fe61
add hcd attr, add note for ehci framelist on NXP derivative
2021-08-23 15:40:57 +07:00
4ca176c291
refactor ehci init api
2021-08-23 12:37:54 +07:00
6a16f6ccdd
rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
2021-08-23 11:01:40 +07:00
69e539fda4
Fix CI.
2021-08-21 12:11:35 +02:00
e20755442a
nuc126: fix set_address & disable sof
2021-08-21 12:04:02 +02:00
ff59e98a6a
Add compile switch to enable SOF during suspend only
2021-08-19 23:57:34 +09:00
351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
Jerzy Kasenberg