f26fbaf404
clean up remove usbd_control_stall()
2019-03-27 16:26:52 +07:00
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
4722376654
remove dcd_get_frame_number()
2019-03-27 01:01:48 +07:00
852abba918
Merge branch 'master' into develop
2019-03-27 00:46:32 +07:00
89b9ee2f52
revert to use pending_read_from_host (temp) since
2019-03-27 00:39:14 +07:00
aaf5714268
follow up to pr #46
2019-03-25 11:38:16 +07:00
fad8720215
Merge pull request #46 from tannewt/fix_cdc_out
...
Fix slow CDC OUT by NAKing
2019-03-24 03:27:58 -07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
d866999bf0
remove idle rate enforcement, should be done in application level
2019-03-23 21:46:51 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
43eb1a8b16
added stub for dcd_stm32f3
2019-03-22 23:57:56 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
909891325a
Fix slow CDC OUT by NAKing
...
This NAKs CDC OUT packets when the ring buffer doesn't have
enough space for it. This makes CDC OUT reliable rather than
allowing overwriting into the ring buffer.
2019-03-21 14:52:56 -07:00
3574688d26
more with mynewt
2019-03-21 00:54:42 +07:00
a1a6220ac8
update osal for mynewt
2019-03-21 00:36:52 +07:00
87962a222d
clean up
2019-03-20 23:12:12 +07:00
da55610f43
clean up
2019-03-20 20:19:21 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
4647ad8136
clean up
2019-03-20 14:41:35 +07:00
f932cf3854
stm32 update fifo in comment
2019-03-17 15:16:52 +07:00
5e92d67015
stm32 update TX Fifo for edpt IN, both CDC + MSC work great
...
- call dcd_event_xfer_complete() when enough bytes received
- add dcd_get_frame_number()
2019-03-15 18:43:09 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
195a44172a
update stm32 dcd stall control endpoint
2019-03-13 16:54:10 +07:00
8418cb816b
Merge branch 'master' into stm32f4
2019-03-05 05:45:42 -08:00
a19455d1ff
follow up to PR #39
2019-03-04 11:51:36 +07:00
fa8141f31f
Fixes #33 : Remove invalid use of strncpy().
...
This was causing a stringop-truncation compiler warning in gcc 8 when
the #defined values being copied from were string literals.
`error: 'strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Werror=stringop-truncation]`
These fields aren't NUL terminated C strings, they are a fixed width buffer
that is supposed to be space (0x20) padded.
2019-03-03 19:41:41 -08:00
c95ad426c6
stm32f4: Refactor IN and OUT endpoint interrupt handling into their own functions.
2019-02-27 11:01:08 -05:00
f43161353c
stm32f4: Refactor RX FIFO read into its own function; remove RXFLVL
...
resetting (read only) and masking (no nested ints).
2019-02-27 10:39:37 -05:00
c51b11f103
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 09:15:07 -05:00
f2d76a39eb
mscd: send scsi status before invoke read10/write10/scsi complete callback
2019-02-22 01:31:13 +07:00
c870efffc0
Fix write protected MSC. The bits were flipped.
2019-02-20 15:12:36 -08:00
5a1c5cf0b7
stm32f4: Clarify comments and disable OTGINT; fixes stack reset on
...
cable disconnect, and we don't use OTG right now.
2019-02-14 23:41:16 -05:00
5a34a9de69
stm32f4: Implement STALL logic for endpoints.
2019-02-08 16:46:12 -05:00
5526d840a8
stm32f4: Do some comment/dead code (per 6048a3b) cleanups.
2019-02-08 12:05:44 -05:00
c7a52829f4
Clarify receive_packet comment, add SOF handling.
2019-02-08 11:51:29 -05:00
5645d44127
stm32f4: Add for-loop guard for transmit_packet xfers < 4 chars.
2019-02-07 21:25:27 -05:00
28ccc8bd0b
stm32f4: Fix bad implementation of receive_packet function.
2019-02-07 21:23:00 -05:00
b819b33a68
stm32f4: Make sure interrupts enabled for non-zero endpoints.
2019-02-07 20:29:48 -05:00
4dc6746a68
stm32f4: Implement dcd_edpt_busy. Don't set EPENA for activated endpoints.
2019-02-05 13:22:39 -05:00
747815f03b
stm32f4: Ensure endpoints enabled properly, using correct FIFOs.
2019-02-04 20:30:47 -05:00
f5d9e7e560
stm32f4: Implement dcd_edpt_open.
2019-01-30 09:27:27 -05:00
7aadaa3ef2
stm32f4: Handle only one setup packet at a time as a workaround. Device
...
enumerates.
2019-01-30 05:28:48 -05:00
a9e188a3d2
stm32f4: Implement dcd_set_address.
2019-01-30 02:48:49 -05:00
fcabc717d1
Small cleanups (remove inaccurate comment, set EP0 max size based on speed).
2019-01-30 02:03:19 -05:00
8629f0c108
Properly schedule OUT xfers on a packet basis.
2019-01-30 02:01:09 -05:00
6918db3639
stm32f4: Add receive packet function.
2019-01-30 01:42:17 -05:00
9ce29f5ee6
stm32f4: Refactor packet transmit into subroutine.
2019-01-30 00:49:00 -05:00
1a84f5da54
nrf5x Let application decide USBD_IRQn priority
2019-01-29 19:42:31 +07:00
59c1b4b427
zero init internal class/device data
2019-01-29 19:39:34 +07:00
e4e8413acc
add tusb_inited() API, check for inited() before running device/host task
2019-01-29 19:05:07 +07:00
hathach