07adc26ce3
fix usbcv TD 9.4 Interface Descriptor test
2021-08-26 13:07:10 +07:00
8d97f0e81f
Merge pull request #1041 from HiFiPhile/vdc
...
Fix vendor fifo deadlock, add tud_vendor_n_read_flush
2021-08-25 23:22:15 +07:00
3debeb637a
test hid controller with rp2040
2021-08-24 21:34:51 +07:00
3c0c051df1
add tuh_vid_pid_get()
...
complete Sony PS4 dualshock controller example
2021-08-24 19:10:23 +07:00
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
5d152503ee
fix dev0 out of bound array due to leftover
2021-08-24 12:16:23 +07:00
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
353c070d00
exclude dev0 from usbh devices pool
2021-08-24 01:06:05 +07:00
3309425211
sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB
...
separate dev0 from _usbh_devices pool to save sram
2021-08-23 19:56:53 +07:00
75cd593b60
add hcd_devtree_get_info()
...
remove usbh_hcd.h
2021-08-23 17:00:41 +07:00
a490a3fe61
add hcd attr, add note for ehci framelist on NXP derivative
2021-08-23 15:40:57 +07:00
4ca176c291
refactor ehci init api
2021-08-23 12:37:54 +07:00
6a16f6ccdd
rename CFG_TUSB_HOST_DEVICE_MAX to CFG_TUH_DEVICE_MAX
2021-08-23 11:01:40 +07:00
800f85329e
add tuh_hid_receive_report() for applicaiton to explicitly request report
2021-08-23 11:00:21 +07:00
4941cde175
Fix vendor fifo deadlock, add tud_vendor_n_read_flush
2021-08-22 13:26:50 +02:00
69e539fda4
Fix CI.
2021-08-21 12:11:35 +02:00
e20755442a
nuc126: fix set_address & disable sof
2021-08-21 12:04:02 +02:00
beb1a5c678
minor clean up
2021-08-20 19:39:33 +07:00
22a5b1608c
change host driver open return type to bool
...
the descriptor len used by driver will be calculated by usbh
2021-08-20 19:31:38 +07:00
97703587d9
improve host configuration parsing
...
- remove driver class code binding
- fully support IAD
- auto calculate total length for interface descriptor for driver
2021-08-20 19:08:38 +07:00
62f2efbe8c
hid host skip get report descriptor if too large instead of assert
2021-08-20 18:26:56 +07:00
1cef2b6a42
extra common edpt helper for device and host stack
...
tu_edpt_validate() and tu_edpt_bind_driver()
2021-08-20 18:01:10 +07:00
ff59e98a6a
Add compile switch to enable SOF during suspend only
2021-08-19 23:57:34 +09:00
351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
c4a9a04d67
Merge pull request #1025 from hathach/add-hid-boot-example
...
add hid_boot_interface example
2021-08-19 11:24:10 +07:00
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
9b869463dd
skipped suspend/resume if not connected
2021-08-17 17:00:53 +07:00
a6d18c400d
fix keyboard report reserved is always 0
2021-08-17 13:29:26 +07:00
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
d52b981c3a
revert ready() check in claim (do it later in separated PR)
2021-08-12 17:07:39 +07:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
2ea0ef4543
correct newline usage keycode (ENTER 0x28)
2021-08-10 16:40:43 +07:00
hathach