grouping samd51 boards
This commit is contained in:
parent
a3fff24fbc
commit
a6c7467fd3
|
@ -1,53 +0,0 @@
|
||||||
CFLAGS += \
|
|
||||||
-flto \
|
|
||||||
-mthumb \
|
|
||||||
-mabi=aapcs-linux \
|
|
||||||
-mcpu=cortex-m4 \
|
|
||||||
-mfloat-abi=hard \
|
|
||||||
-mfpu=fpv4-sp-d16 \
|
|
||||||
-nostdlib -nostartfiles \
|
|
||||||
-D__SAMD51J19A__ \
|
|
||||||
-DCFG_TUSB_MCU=OPT_MCU_SAMD51
|
|
||||||
|
|
||||||
CFLAGS += -Wno-error=undef
|
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
|
||||||
LD_FILE = hw/bsp/$(BOARD)/samd51g19a_flash.ld
|
|
||||||
|
|
||||||
SRC_C += \
|
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/gcc/startup_samd51.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/system_samd51.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/gclk/hpl_gclk.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/mclk/hpl_mclk.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/oscctrl/hpl_oscctrl.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hal/src/hal_atomic.c
|
|
||||||
|
|
||||||
INC += \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/ \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/config \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hal/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hal/utils/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hpl/port \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hri \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/CMSIS/Include
|
|
||||||
|
|
||||||
# For TinyUSB port source
|
|
||||||
VENDOR = microchip
|
|
||||||
CHIP_FAMILY = samd
|
|
||||||
|
|
||||||
# For freeRTOS port source
|
|
||||||
FREERTOS_PORT = ARM_CM4F
|
|
||||||
|
|
||||||
# For flash-jlink target
|
|
||||||
JLINK_DEVICE = ATSAMD51J19
|
|
||||||
|
|
||||||
# flash using bossac at least version 1.8
|
|
||||||
# can be found in arduino15/packages/arduino/tools/bossac/
|
|
||||||
# Add it to your PATH or change BOSSAC variable to match your installation
|
|
||||||
BOSSAC = bossac
|
|
||||||
|
|
||||||
flash: $(BUILD)/$(BOARD)-firmware.bin
|
|
||||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
|
||||||
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R
|
|
|
@ -1,163 +0,0 @@
|
||||||
/*
|
|
||||||
* The MIT License (MIT)
|
|
||||||
*
|
|
||||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
|
||||||
*
|
|
||||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
||||||
* of this software and associated documentation files (the "Software"), to deal
|
|
||||||
* in the Software without restriction, including without limitation the rights
|
|
||||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
||||||
* copies of the Software, and to permit persons to whom the Software is
|
|
||||||
* furnished to do so, subject to the following conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be included in
|
|
||||||
* all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
||||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
||||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
||||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
||||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
||||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
||||||
* THE SOFTWARE.
|
|
||||||
*
|
|
||||||
* This file is part of the TinyUSB stack.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include "sam.h"
|
|
||||||
#include "bsp/board.h"
|
|
||||||
|
|
||||||
#include "hal/include/hal_gpio.h"
|
|
||||||
#include "hal/include/hal_init.h"
|
|
||||||
#include "hpl/gclk/hpl_gclk_base.h"
|
|
||||||
#include "hpl_mclk_config.h"
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
void USB_0_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_1_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_2_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_3_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
#define LED_PIN 22
|
|
||||||
#define BUTTON_PIN 18 // pin D5
|
|
||||||
|
|
||||||
/* Referenced GCLKs, should be initialized firstly */
|
|
||||||
#define _GCLK_INIT_1ST 0xFFFFFFFF
|
|
||||||
|
|
||||||
/* Not referenced GCLKs, initialized last */
|
|
||||||
#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST)
|
|
||||||
|
|
||||||
void board_init(void)
|
|
||||||
{
|
|
||||||
// Clock init ( follow hpl_init.c )
|
|
||||||
hri_nvmctrl_set_CTRLA_RWS_bf(NVMCTRL, 0);
|
|
||||||
|
|
||||||
_osc32kctrl_init_sources();
|
|
||||||
_oscctrl_init_sources();
|
|
||||||
_mclk_init();
|
|
||||||
#if _GCLK_INIT_1ST
|
|
||||||
_gclk_init_generators_by_fref(_GCLK_INIT_1ST);
|
|
||||||
#endif
|
|
||||||
_oscctrl_init_referenced_generators();
|
|
||||||
_gclk_init_generators_by_fref(_GCLK_INIT_LAST);
|
|
||||||
|
|
||||||
// Update SystemCoreClock since it is hard coded with asf4 and not correct
|
|
||||||
// Init 1ms tick timer (samd SystemCoreClock may not correct)
|
|
||||||
SystemCoreClock = CONF_CPU_FREQUENCY;
|
|
||||||
SysTick_Config(CONF_CPU_FREQUENCY / 1000);
|
|
||||||
|
|
||||||
// Led init
|
|
||||||
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(LED_PIN, 0);
|
|
||||||
|
|
||||||
// Button init
|
|
||||||
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
|
|
||||||
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
|
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
||||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
|
||||||
NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* USB Clock init
|
|
||||||
* The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
|
|
||||||
* for low speed and full speed operation. */
|
|
||||||
hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN);
|
|
||||||
hri_mclk_set_AHBMASK_USB_bit(MCLK);
|
|
||||||
hri_mclk_set_APBBMASK_USB_bit(MCLK);
|
|
||||||
|
|
||||||
// USB Pin Init
|
|
||||||
gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(PIN_PA24, false);
|
|
||||||
gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
|
|
||||||
gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(PIN_PA25, false);
|
|
||||||
gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
|
|
||||||
|
|
||||||
gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM);
|
|
||||||
gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP);
|
|
||||||
}
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// Board porting API
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
|
|
||||||
void board_led_write(bool state)
|
|
||||||
{
|
|
||||||
gpio_set_pin_level(LED_PIN, state);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint32_t board_button_read(void)
|
|
||||||
{
|
|
||||||
// button is active low
|
|
||||||
return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_uart_read(uint8_t* buf, int len)
|
|
||||||
{
|
|
||||||
(void) buf; (void) len;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_uart_write(void const * buf, int len)
|
|
||||||
{
|
|
||||||
(void) buf; (void) len;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
||||||
volatile uint32_t system_ticks = 0;
|
|
||||||
|
|
||||||
void SysTick_Handler (void)
|
|
||||||
{
|
|
||||||
system_ticks++;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint32_t board_millis(void)
|
|
||||||
{
|
|
||||||
return system_ticks;
|
|
||||||
}
|
|
||||||
#endif
|
|
|
@ -1,53 +0,0 @@
|
||||||
CFLAGS += \
|
|
||||||
-flto \
|
|
||||||
-mthumb \
|
|
||||||
-mabi=aapcs-linux \
|
|
||||||
-mcpu=cortex-m4 \
|
|
||||||
-mfloat-abi=hard \
|
|
||||||
-mfpu=fpv4-sp-d16 \
|
|
||||||
-nostdlib -nostartfiles \
|
|
||||||
-D__SAMD51J19A__ \
|
|
||||||
-DCFG_TUSB_MCU=OPT_MCU_SAMD51
|
|
||||||
|
|
||||||
CFLAGS += -Wno-error=undef
|
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
|
||||||
LD_FILE = hw/bsp/$(BOARD)/samd51g19a_flash.ld
|
|
||||||
|
|
||||||
SRC_C += \
|
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/gcc/startup_samd51.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/system_samd51.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/gclk/hpl_gclk.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/mclk/hpl_mclk.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hpl/oscctrl/hpl_oscctrl.c \
|
|
||||||
hw/mcu/microchip/asf4/samd51/hal/src/hal_atomic.c
|
|
||||||
|
|
||||||
INC += \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/ \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/config \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hal/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hal/utils/include \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hpl/port \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/hri \
|
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/CMSIS/Include
|
|
||||||
|
|
||||||
# For TinyUSB port source
|
|
||||||
VENDOR = microchip
|
|
||||||
CHIP_FAMILY = samd
|
|
||||||
|
|
||||||
# For freeRTOS port source
|
|
||||||
FREERTOS_PORT = ARM_CM4F
|
|
||||||
|
|
||||||
# For flash-jlink target
|
|
||||||
JLINK_DEVICE = ATSAMD51J19
|
|
||||||
|
|
||||||
# flash using bossac at least version 1.8
|
|
||||||
# can be found in arduino15/packages/arduino/tools/bossac/
|
|
||||||
# Add it to your PATH or change BOSSAC variable to match your installation
|
|
||||||
BOSSAC = bossac
|
|
||||||
|
|
||||||
flash: $(BUILD)/$(BOARD)-firmware.bin
|
|
||||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
|
||||||
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R
|
|
|
@ -1,163 +0,0 @@
|
||||||
/*
|
|
||||||
* The MIT License (MIT)
|
|
||||||
*
|
|
||||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
|
||||||
*
|
|
||||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
||||||
* of this software and associated documentation files (the "Software"), to deal
|
|
||||||
* in the Software without restriction, including without limitation the rights
|
|
||||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
||||||
* copies of the Software, and to permit persons to whom the Software is
|
|
||||||
* furnished to do so, subject to the following conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be included in
|
|
||||||
* all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
||||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
||||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
||||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
||||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
||||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
||||||
* THE SOFTWARE.
|
|
||||||
*
|
|
||||||
* This file is part of the TinyUSB stack.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include "sam.h"
|
|
||||||
#include "bsp/board.h"
|
|
||||||
|
|
||||||
#include "hal/include/hal_gpio.h"
|
|
||||||
#include "hal/include/hal_init.h"
|
|
||||||
#include "hpl/gclk/hpl_gclk_base.h"
|
|
||||||
#include "hpl_mclk_config.h"
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
void USB_0_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_1_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_2_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void USB_3_Handler (void)
|
|
||||||
{
|
|
||||||
tud_int_handler(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
#define LED_PIN 16
|
|
||||||
#define BUTTON_PIN (14 + 32) // pin D5
|
|
||||||
|
|
||||||
/* Referenced GCLKs, should be initialized firstly */
|
|
||||||
#define _GCLK_INIT_1ST 0xFFFFFFFF
|
|
||||||
|
|
||||||
/* Not referenced GCLKs, initialized last */
|
|
||||||
#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST)
|
|
||||||
|
|
||||||
void board_init(void)
|
|
||||||
{
|
|
||||||
// Clock init ( follow hpl_init.c )
|
|
||||||
hri_nvmctrl_set_CTRLA_RWS_bf(NVMCTRL, 0);
|
|
||||||
|
|
||||||
_osc32kctrl_init_sources();
|
|
||||||
_oscctrl_init_sources();
|
|
||||||
_mclk_init();
|
|
||||||
#if _GCLK_INIT_1ST
|
|
||||||
_gclk_init_generators_by_fref(_GCLK_INIT_1ST);
|
|
||||||
#endif
|
|
||||||
_oscctrl_init_referenced_generators();
|
|
||||||
_gclk_init_generators_by_fref(_GCLK_INIT_LAST);
|
|
||||||
|
|
||||||
// Update SystemCoreClock since it is hard coded with asf4 and not correct
|
|
||||||
// Init 1ms tick timer (samd SystemCoreClock may not correct)
|
|
||||||
SystemCoreClock = CONF_CPU_FREQUENCY;
|
|
||||||
SysTick_Config(CONF_CPU_FREQUENCY / 1000);
|
|
||||||
|
|
||||||
// Led init
|
|
||||||
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(LED_PIN, 0);
|
|
||||||
|
|
||||||
// Button init
|
|
||||||
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
|
|
||||||
gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
|
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
||||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
|
||||||
NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* USB Clock init
|
|
||||||
* The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
|
|
||||||
* for low speed and full speed operation. */
|
|
||||||
hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN);
|
|
||||||
hri_mclk_set_AHBMASK_USB_bit(MCLK);
|
|
||||||
hri_mclk_set_APBBMASK_USB_bit(MCLK);
|
|
||||||
|
|
||||||
// USB Pin Init
|
|
||||||
gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(PIN_PA24, false);
|
|
||||||
gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
|
|
||||||
gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
|
|
||||||
gpio_set_pin_level(PIN_PA25, false);
|
|
||||||
gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
|
|
||||||
|
|
||||||
gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM);
|
|
||||||
gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP);
|
|
||||||
}
|
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
// Board porting API
|
|
||||||
//--------------------------------------------------------------------+
|
|
||||||
|
|
||||||
void board_led_write(bool state)
|
|
||||||
{
|
|
||||||
gpio_set_pin_level(LED_PIN, state);
|
|
||||||
}
|
|
||||||
|
|
||||||
uint32_t board_button_read(void)
|
|
||||||
{
|
|
||||||
// button is active low
|
|
||||||
return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_uart_read(uint8_t* buf, int len)
|
|
||||||
{
|
|
||||||
(void) buf; (void) len;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int board_uart_write(void const * buf, int len)
|
|
||||||
{
|
|
||||||
(void) buf; (void) len;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
||||||
volatile uint32_t system_ticks = 0;
|
|
||||||
|
|
||||||
void SysTick_Handler (void)
|
|
||||||
{
|
|
||||||
system_ticks++;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint32_t board_millis(void)
|
|
||||||
{
|
|
||||||
return system_ticks;
|
|
||||||
}
|
|
||||||
#endif
|
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 17
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN 28
|
||||||
|
#define BUTTON_STATE_ACTIVE 1
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 17
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN 21
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 17
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN 15
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -9,9 +9,6 @@ CFLAGS += \
|
||||||
-DCONF_DFLL_OVERWRITE_CALIBRATION=0 \
|
-DCONF_DFLL_OVERWRITE_CALIBRATION=0 \
|
||||||
-DCFG_TUSB_MCU=OPT_MCU_SAMD21
|
-DCFG_TUSB_MCU=OPT_MCU_SAMD21
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
|
||||||
#LD_FILE = hw/bsp/$(BOARD)/samd21g18a_flash.ld
|
|
||||||
|
|
||||||
SRC_C += \
|
SRC_C += \
|
||||||
hw/mcu/microchip/asf4/samd21/gcc/gcc/startup_samd21.c \
|
hw/mcu/microchip/asf4/samd21/gcc/gcc/startup_samd21.c \
|
||||||
hw/mcu/microchip/asf4/samd21/gcc/system_samd21.c \
|
hw/mcu/microchip/asf4/samd21/gcc/system_samd21.c \
|
||||||
|
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 23
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN 16 // D5
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -0,0 +1,9 @@
|
||||||
|
CFLAGS += -D__SAMD51J19A__
|
||||||
|
|
||||||
|
# All source paths should be relative to the top level.
|
||||||
|
LD_FILE = $(BOARD_PATH)/$(BOARD).ld
|
||||||
|
|
||||||
|
# For flash-jlink target
|
||||||
|
JLINK_DEVICE = ATSAMD51J19
|
||||||
|
|
||||||
|
flash: flash-bossac
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 22
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN 18 // D5
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -0,0 +1,9 @@
|
||||||
|
CFLAGS += -D__SAMD51J19A__
|
||||||
|
|
||||||
|
# All source paths should be relative to the top level.
|
||||||
|
LD_FILE = $(BOARD_PATH)/$(BOARD).ld
|
||||||
|
|
||||||
|
# For flash-jlink target
|
||||||
|
JLINK_DEVICE = ATSAMD51J19
|
||||||
|
|
||||||
|
flash: flash-bossac
|
|
@ -0,0 +1,50 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2020, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PIN 16
|
||||||
|
#define LED_STATE_ON 1
|
||||||
|
|
||||||
|
// Button
|
||||||
|
#define BUTTON_PIN (32+14) // D5
|
||||||
|
#define BUTTON_STATE_ACTIVE 0
|
||||||
|
|
||||||
|
// UART
|
||||||
|
#define UART_RX_PIN 4
|
||||||
|
#define UART_TX_PIN 5
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* BOARD_H_ */
|
|
@ -0,0 +1,10 @@
|
||||||
|
CFLAGS += -D__SAMD51J19A__
|
||||||
|
|
||||||
|
# All source paths should be relative to the top level.
|
||||||
|
LD_FILE = $(BOARD_PATH)/$(BOARD).ld
|
||||||
|
|
||||||
|
# For flash-jlink target
|
||||||
|
JLINK_DEVICE = ATSAMD51J19
|
||||||
|
|
||||||
|
flash: flash-bossac
|
||||||
|
|
|
@ -26,6 +26,7 @@
|
||||||
|
|
||||||
#include "sam.h"
|
#include "sam.h"
|
||||||
#include "bsp/board.h"
|
#include "bsp/board.h"
|
||||||
|
#include "board.h"
|
||||||
|
|
||||||
#include "hal/include/hal_gpio.h"
|
#include "hal/include/hal_gpio.h"
|
||||||
#include "hal/include/hal_init.h"
|
#include "hal/include/hal_init.h"
|
||||||
|
@ -58,8 +59,6 @@ void USB_3_Handler (void)
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
|
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
#define LED_PIN 23
|
|
||||||
#define BUTTON_PIN 16 // pin D5
|
|
||||||
|
|
||||||
/* Referenced GCLKs, should be initialized firstly */
|
/* Referenced GCLKs, should be initialized firstly */
|
||||||
#define _GCLK_INIT_1ST 0xFFFFFFFF
|
#define _GCLK_INIT_1ST 0xFFFFFFFF
|
|
@ -1,19 +1,17 @@
|
||||||
|
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||||
|
|
||||||
CFLAGS += \
|
CFLAGS += \
|
||||||
-flto \
|
-flto \
|
||||||
-mthumb \
|
-mthumb \
|
||||||
-mabi=aapcs-linux \
|
-mabi=aapcs \
|
||||||
-mcpu=cortex-m4 \
|
-mcpu=cortex-m4 \
|
||||||
-mfloat-abi=hard \
|
-mfloat-abi=hard \
|
||||||
-mfpu=fpv4-sp-d16 \
|
-mfpu=fpv4-sp-d16 \
|
||||||
-nostdlib -nostartfiles \
|
-nostdlib -nostartfiles \
|
||||||
-D__SAMD51J19A__ \
|
|
||||||
-DCFG_TUSB_MCU=OPT_MCU_SAMD51
|
-DCFG_TUSB_MCU=OPT_MCU_SAMD51
|
||||||
|
|
||||||
CFLAGS += -Wno-error=undef
|
CFLAGS += -Wno-error=undef
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
|
||||||
LD_FILE = hw/bsp/$(BOARD)/samd51g19a_flash.ld
|
|
||||||
|
|
||||||
SRC_C += \
|
SRC_C += \
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/gcc/startup_samd51.c \
|
hw/mcu/microchip/asf4/samd51/gcc/gcc/startup_samd51.c \
|
||||||
hw/mcu/microchip/asf4/samd51/gcc/system_samd51.c \
|
hw/mcu/microchip/asf4/samd51/gcc/system_samd51.c \
|
||||||
|
@ -24,6 +22,7 @@ SRC_C += \
|
||||||
hw/mcu/microchip/asf4/samd51/hal/src/hal_atomic.c
|
hw/mcu/microchip/asf4/samd51/hal/src/hal_atomic.c
|
||||||
|
|
||||||
INC += \
|
INC += \
|
||||||
|
$(TOP)/$(BOARD_PATH) \
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/ \
|
$(TOP)/hw/mcu/microchip/asf4/samd51/ \
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/config \
|
$(TOP)/hw/mcu/microchip/asf4/samd51/config \
|
||||||
$(TOP)/hw/mcu/microchip/asf4/samd51/include \
|
$(TOP)/hw/mcu/microchip/asf4/samd51/include \
|
||||||
|
@ -40,14 +39,11 @@ CHIP_FAMILY = samd
|
||||||
# For freeRTOS port source
|
# For freeRTOS port source
|
||||||
FREERTOS_PORT = ARM_CM4F
|
FREERTOS_PORT = ARM_CM4F
|
||||||
|
|
||||||
# For flash-jlink target
|
|
||||||
JLINK_DEVICE = ATSAMD51J19
|
|
||||||
|
|
||||||
# flash using bossac at least version 1.8
|
# flash using bossac at least version 1.8
|
||||||
# can be found in arduino15/packages/arduino/tools/bossac/
|
# can be found in arduino15/packages/arduino/tools/bossac/
|
||||||
# Add it to your PATH or change BOSSAC variable to match your installation
|
# Add it to your PATH or change BOSSAC variable to match your installation
|
||||||
BOSSAC = bossac
|
BOSSAC = bossac
|
||||||
|
|
||||||
flash: $(BUILD)/$(BOARD)-firmware.bin
|
flash-bossac: $(BUILD)/$(BOARD)-firmware.bin
|
||||||
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
|
||||||
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R
|
$(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R
|
Loading…
Reference in New Issue